GSR swap parting out.
#1
Thread Starter
Join Date: Feb 2002
Location: Knoxville, TN, USA
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
GSR swap parting out.
O.K. I'm tired of trying to sell this stuff all together.
I'd rather meet or have person come get it.
So, here it is.
GSR head freshly cleaned, new valve seals, new supertech SS valves, and 3angle vale job. Valvecover, and intake incl. OBD1.One spark plug hole is kinda, but retapped and is fine. No cams. $600.00
GSR block is bored 20 over, and has new oil pan. Crank incl.$600.00SOLD
BN Wiseco 9.5 to 1 comp. ratio, rings already filed to .016 top ring and .014 on 2nd ring.$250.00SOLD
BN Eagle stock length H-beam rods.$300.00SOLD
OBD1 dizzy$150.00
OBD1 wire harness and 100k alternator.$200.00
OBD1 P72 ECU$150.00
GSR tranny, 10k new 1st and 2nd gear, no grinds.$600.00
10k clutchmasters stage 3 clutch and flywheel. $200.00
Del Sol B-series shift linkage. $75.00
Axles and intermediate shaft.$50.00
ARP GSR headstuds.$75.00
E-MAIL me at KParrott76@comcast.com or post.
That's all folks.
Modified by ConeJunkie at 3:01 AM 8/24/2005
Modified by ConeJunkie at 8:32 PM 9/4/2005
Modified by ConeJunkie at 3:59 AM 9/9/2005
Modified by ConeJunkie at 5:54 AM 9/13/2005
Modified by ConeJunkie at 11:09 PM 9/18/2005
I'd rather meet or have person come get it.
So, here it is.
GSR head freshly cleaned, new valve seals, new supertech SS valves, and 3angle vale job. Valvecover, and intake incl. OBD1.One spark plug hole is kinda, but retapped and is fine. No cams. $600.00
GSR block is bored 20 over, and has new oil pan. Crank incl.$600.00SOLD
BN Wiseco 9.5 to 1 comp. ratio, rings already filed to .016 top ring and .014 on 2nd ring.$250.00SOLD
BN Eagle stock length H-beam rods.$300.00SOLD
OBD1 dizzy$150.00
OBD1 wire harness and 100k alternator.$200.00
OBD1 P72 ECU$150.00
GSR tranny, 10k new 1st and 2nd gear, no grinds.$600.00
10k clutchmasters stage 3 clutch and flywheel. $200.00
Del Sol B-series shift linkage. $75.00
Axles and intermediate shaft.$50.00
ARP GSR headstuds.$75.00
E-MAIL me at KParrott76@comcast.com or post.
That's all folks.
Modified by ConeJunkie at 3:01 AM 8/24/2005
Modified by ConeJunkie at 8:32 PM 9/4/2005
Modified by ConeJunkie at 3:59 AM 9/9/2005
Modified by ConeJunkie at 5:54 AM 9/13/2005
Modified by ConeJunkie at 11:09 PM 9/18/2005
#5
Thread Starter
Join Date: Feb 2002
Location: Knoxville, TN, USA
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Re: (black_dohc)
Short block is complete, with new Honda crank and rod bearings.
EG motor mounts, crank pulley, ITR oil pump, new main seal, and new water pump.
NOTE: no pistons and rods
EG motor mounts, crank pulley, ITR oil pump, new main seal, and new water pump.
NOTE: no pistons and rods
Trending Topics
#13
Honda-Tech Member
Join Date: Jan 2004
Location: Indy, USA
Posts: 581
Likes: 0
Received 0 Likes
on
0 Posts
I'm interested in your head. Who did the work and got any pics?
Actually how about motor and head. I don't need the tranny. Let me know and really interested.
Modified by Bitchinteg at 6:31 PM 9/6/2005
Actually how about motor and head. I don't need the tranny. Let me know and really interested.
Modified by Bitchinteg at 6:31 PM 9/6/2005
Thread
Thread Starter
Forum
Replies
Last Post