FS/PART OUT - 900HP INTEGRA
06-30-2009, 08:11 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Dec 2005
Location: Centerville, Utah, USA
Posts: 1,049
Likes: 0
Received 0 Likes
on
0 Posts
FS/PART OUT - 900HP INTEGRA
Motor is as follows: $5500+shipping!!!! Will Come with everything listed below.
LS block
GE Sleeves w/Orings
CP 84mm pistons with upgrades wrist pins
Manley rods
LS crank
Clevite Bearings
OEM Oil/Water pump
Race Fluidamper (will including removal tool)
LS oil pan Tapped
GE LS/Vtec Kit
GE 84mm head gasket
GSR Head
Fully Ported and Polished by Ryan@Warr heads
GSR Cams
Supertech Springs/Retainers
Supertech Inconel Exhaust valves
Bronze guides
Valve Job
High Amp Alternator
Wiring Harness included
3 Distributors wired for the external coil, 1 LS, 2 GSR's
Custom built Breather kit using 2 Moroso Cans with 4 -12an Lines with return into the block
Valve Cover with 4 -12an fittings welding to it and powder coated Gloss Black
Edelbrock Intake Manifold (intake port matched)
Stock GSR throttle body
Starter
**Mounts/Trans/Scatter Shield NOT Included!**
The Breather kit:
Turbo Kit: $3100+shipping!! (SAVE $300 if ya buy as a kit)
Full-Race T4 Twin Scroll Manifold $1050 shipped!
Dual Tial 44mm Wastegates with .7 bar springs w/dump tubes $700 Shipped!!!
Garrett 4294 Journal Bearing $800 Shipped!
Includes Gasket, Feed/Return lines and fittings.
IC piping Powder coated Gloss black w/42r-S372 connector and Tial 50mm bov flange $300 Shipped!
Kinda goes together how it's layed out!
Will Include the V-Band for turbo Connection
*BOV & Couplers/T bolts clamps not lncluded!
All couplers and T-bolts $110 shipped
Precision 825hp Intercooler $450 Shipped - SOLD!
Tial 50MM BOV (Black) $230 shipped
4" Down Pipe w/flex $300 shipped
VERY well constructed to fit RIGHT up against the slave cylinder and oil pan for a tight
fit to help keep room for traction bar & engine catch pan.
4" Aluminum Exhaust (All With V-Bands) $250 (LOCAL PICKUP ONLY!)
DriveTrain:
Liberty Dog Box transmission with Quaife (GSR ratios, B16 Quaife) $4300 SHIPPED!
Exedy Twin disc Clutch $1050 SHIPPED!
Has Ten Passes on it and approx 200 miles total!
DSS 5.9 Axles w/hubs&knuckles $1300 SHIPPED!
Has the 300m Slug in it with 3 hits and looks great no twisting!
Brakes NOT included! Might consider selling with them for more $$$$.
Avid Traction bars $300 SHIPPED!
IN NEW condition!
Golden Eagle Scatter Shield $165 shipped!
Powder Coated Gloss Black!
Electronics:
S300 with all options $620 Shipped -PENDING
PLX Wideband w/bosch sensor $220 Shipped
AEM 5 Bar map Sensor $75 shipped
AEM Boost solenoid $75 shipped
MSD Digital 7 Plus Prog (#75314 4 cyl apps only) $730 shipped
Will include Serial Cable with IOGear USB adapter cable.
And Wiring Harness if wanted, Shielded Air Craft Wiring was used and need to be grounded.
Shielded wiring reduces electric interference from the box and ECU.
MSD Dig 7 HVC II Coil $160 shipped
IN BRAND NEW CONDITION!
Aeromotive Eliminator Pump $350 shipped
Dual summit filters with 100 michron inserts (before and after the pump) $100 for both
Aeromotive FPR w/Pressure Gauge $140 shipped
Bosch 1600cc injectors $160 shipped - SOLD!
Golden Eagle Fuel Rail $100 shipped
with -10an & -6an fittings
Hasport Solid Mounts Powder coated black $300 shipped - Pending
Del Sol Dual Core Radiator w/slim fan $110 shipped
Full Racing Suit (Shroud Pants, Shroud Jacket, Simpson Shoes, Shroud neck brace, Shroud gloves) $450 shipped
Spinwerks Drag Wheels (slick below included) $600 shipped!
MT 24.5"x9" slicks
About 10 Passes. Wheels look BRAND NEW!!! Slicks have TONS of meat left!
VIS Invader Carbon Fiber Hood $350
1994 Acura Integra GSR Black Chassis: $5500!!! Local pickup only!
10 pt Cage, not cert yet but built for certification to 8.50's
Custom fitted MR Window net
Certified shroud 5 pt Harnesses (both drivers and passenger)
Shroud Parachute
Innes Cutoff Switch
OMNI drags 18K rear, 12K fronts coil overs
OMNI Camber Kit (front)
Powder coated wheel with Toyo Rears, Falkin Front tires
Paypal address is SupraTT_T78@hotmail.com
Jason
801-879-4940.
I do have texting so. Text me if ya got questions.
LS block
GE Sleeves w/Orings
CP 84mm pistons with upgrades wrist pins
Manley rods
LS crank
Clevite Bearings
OEM Oil/Water pump
Race Fluidamper (will including removal tool)
LS oil pan Tapped
GE LS/Vtec Kit
GE 84mm head gasket
GSR Head
Fully Ported and Polished by Ryan@Warr heads
GSR Cams
Supertech Springs/Retainers
Supertech Inconel Exhaust valves
Bronze guides
Valve Job
High Amp Alternator
Wiring Harness included
3 Distributors wired for the external coil, 1 LS, 2 GSR's
Custom built Breather kit using 2 Moroso Cans with 4 -12an Lines with return into the block
Valve Cover with 4 -12an fittings welding to it and powder coated Gloss Black
Edelbrock Intake Manifold (intake port matched)
Stock GSR throttle body
Starter
**Mounts/Trans/Scatter Shield NOT Included!**
The Breather kit:
Turbo Kit: $3100+shipping!! (SAVE $300 if ya buy as a kit)
Full-Race T4 Twin Scroll Manifold $1050 shipped!
Dual Tial 44mm Wastegates with .7 bar springs w/dump tubes $700 Shipped!!!
Garrett 4294 Journal Bearing $800 Shipped!
Includes Gasket, Feed/Return lines and fittings.
IC piping Powder coated Gloss black w/42r-S372 connector and Tial 50mm bov flange $300 Shipped!
Kinda goes together how it's layed out!
Will Include the V-Band for turbo Connection
*BOV & Couplers/T bolts clamps not lncluded!
All couplers and T-bolts $110 shipped
Precision 825hp Intercooler $450 Shipped - SOLD!
Tial 50MM BOV (Black) $230 shipped
4" Down Pipe w/flex $300 shipped
VERY well constructed to fit RIGHT up against the slave cylinder and oil pan for a tight
fit to help keep room for traction bar & engine catch pan.
4" Aluminum Exhaust (All With V-Bands) $250 (LOCAL PICKUP ONLY!)
DriveTrain:
Liberty Dog Box transmission with Quaife (GSR ratios, B16 Quaife) $4300 SHIPPED!
Exedy Twin disc Clutch $1050 SHIPPED!
Has Ten Passes on it and approx 200 miles total!
DSS 5.9 Axles w/hubs&knuckles $1300 SHIPPED!
Has the 300m Slug in it with 3 hits and looks great no twisting!
Brakes NOT included! Might consider selling with them for more $$$$.
Avid Traction bars $300 SHIPPED!
IN NEW condition!
Golden Eagle Scatter Shield $165 shipped!
Powder Coated Gloss Black!
Electronics:
S300 with all options $620 Shipped -PENDING
PLX Wideband w/bosch sensor $220 Shipped
AEM 5 Bar map Sensor $75 shipped
AEM Boost solenoid $75 shipped
MSD Digital 7 Plus Prog (#75314 4 cyl apps only) $730 shipped
Will include Serial Cable with IOGear USB adapter cable.
And Wiring Harness if wanted, Shielded Air Craft Wiring was used and need to be grounded.
Shielded wiring reduces electric interference from the box and ECU.
MSD Dig 7 HVC II Coil $160 shipped
IN BRAND NEW CONDITION!
Aeromotive Eliminator Pump $350 shipped
Dual summit filters with 100 michron inserts (before and after the pump) $100 for both
Aeromotive FPR w/Pressure Gauge $140 shipped
Bosch 1600cc injectors $160 shipped - SOLD!
Golden Eagle Fuel Rail $100 shipped
with -10an & -6an fittings
Hasport Solid Mounts Powder coated black $300 shipped - Pending
Del Sol Dual Core Radiator w/slim fan $110 shipped
Full Racing Suit (Shroud Pants, Shroud Jacket, Simpson Shoes, Shroud neck brace, Shroud gloves) $450 shipped
Spinwerks Drag Wheels (slick below included) $600 shipped!
MT 24.5"x9" slicks
About 10 Passes. Wheels look BRAND NEW!!! Slicks have TONS of meat left!
VIS Invader Carbon Fiber Hood $350
1994 Acura Integra GSR Black Chassis: $5500!!! Local pickup only!
10 pt Cage, not cert yet but built for certification to 8.50's
Custom fitted MR Window net
Certified shroud 5 pt Harnesses (both drivers and passenger)
Shroud Parachute
Innes Cutoff Switch
OMNI drags 18K rear, 12K fronts coil overs
OMNI Camber Kit (front)
Powder coated wheel with Toyo Rears, Falkin Front tires
Paypal address is SupraTT_T78@hotmail.com
Jason
801-879-4940.
I do have texting so. Text me if ya got questions.
Last edited by BLKTeg94; 08-24-2009 at 03:45 AM.
Trending Topics
07-02-2009, 10:41 AM
#12
Honda-Tech Member
Thread Starter
Join Date: Dec 2005
Location: Centerville, Utah, USA
Posts: 1,049
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS/PART OUT - 900HP INTEGRA
Yes I do. Everything is still in the car running so. Like posted above, I'd like to at least get ride of the block and trans first before I start parting out all the small stuff.
07-02-2009, 10:57 AM
#13
Honda-Tech Member
Re: FS/PART OUT - 900HP INTEGRA
bump for you because the vid was so crazy loud it made me laugh!! thats the motor i wish was in my sleeper.
07-03-2009, 07:29 PM
#16
Honda-Tech Member
Join Date: Feb 2003
Location: at home
Posts: 1,679
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS/PART OUT - 900HP INTEGRA
I know you are not wanting to part out little things yet but would you be willing to sell the valve cover? I am in need of one with fittings very bad, would buy the catch can also if you were willing to sell the whole system.
07-03-2009, 07:35 PM
#18
Honda-Tech Member
Thread Starter
Join Date: Dec 2005
Location: Centerville, Utah, USA
Posts: 1,049
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS/PART OUT - 900HP INTEGRA
ahhhh.... I REALLY need the block or trans sold. I'd hate to sell something like that and not be able to run the car because I'm missing $500 in parts ya know???
07-04-2009, 02:55 PM
#19
Honda-Tech Member
Join Date: Feb 2003
Location: at home
Posts: 1,679
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS/PART OUT - 900HP INTEGRA
Not a problem I totally understand. Im having a hard time finding one that I can fit, as Im sure you also had the same problem. Without it mine fills up the catch can from the two ports on the back of the black about every two runs, heard that is a pretty common situation at high boost levels.
My bay is rediculously full, any suggestions....free bump for bad *** car as well.
My bay is rediculously full, any suggestions....free bump for bad *** car as well.
