FS: JDM EF8 Parts Glasstop Armrest backseat B18C J1 Tranny and MORE
03-03-2007, 03:04 PM
#1
Honda-Tech Member
Thread Starter
FS: JDM EF8 Parts Glasstop JDM Front End Armrest backseat B18C J1 Tranny and MORE
READ FIRST: Ok, people, PLEASE understand what "MAKING AN OFFER" is - yoou PM me and tell me what you want to pay, NOT pm me and ask how much I want.
Everything is still available as of 3/5/7
New pics of the JDM Front End at the Bottom!
<U>JDM B18c engine </U>
From H Motors online. Exact mileage is unknown as I lost my big CRX file when my comp. crashed, but I believe it to have somewhere in the 60K's on it. I DO have the numbers wrote down somewhere and can verify the milage on it for you if necessary.
It comes with a Skunk2 Intake Manifold to allow clearance, and it has a OBD1 Dizzy and Injectors on it.
I've put about 15K on it myself, NEVER had a issue with it what so ever (except when the wiring was wrong!) Anyways, it has been driven here in the Mid West, so the Oil pan has its fair share of dings but is not punctured or rusted out at all.
The engine has no major leaks, but does leak a bit from the Oil Pan and a bit from the Cam seal, but not enough to ever require adding oil.
Included with the engine are NIB from Acura: Oil Pan Gasket, Timing Belt, Water Pump and WP gasket.
Also included is a stock B series ex. manifold. If your interested and need it, I have a OBD0 to OBD1 ECU harness from Rywire, and a Chipped P28 also from Rywire set to run the engine (has a back up chip aswell)
Most Recent Pic, Im not takin another til I pull it:
How it came from HMO:
<U>J1 Tranny</U>
Bought with my 3rd CRX, I've put around 25K on this between my GSR and old B16, this thing is great, low gears, and NO grinds whatsoever, real smooth shifting.
Best pic I got:
JDM Stuff:
<U>JDM Front End</U>
Almost Forgot, I got a JDM Front End I'll be getting rid of. It is cracked on the Passengerside but has been repaired. It's not the best job but its not exactly noticable. Pictured is the bumper and hood, neither have any major scratches or anything, but are slightly faded in a couple spots due to rubbing off of the importer's paint markings. Included but not pictured are 2 matching black JDM fenders with the sidemarkers. They have a few slight dings, I will get better pics for those interested.
<U>EF8 Glasstop</U>
Includes:
-JDM Maplight (Black)
-JDM Visors (Black with felt and Jap. lettering)
-Headliner (Black)
-Glass and Roof Skin
All neccessary seals are in tact, I followed Mike's How To and removed the Glass from the Rook skin, which has been trimmed to the point it's ready for install almost (minor trimming still needed). The headliner has no scratches or punctures of any kind, neither do the visors or any other parts.
<U>JDM Armrest</U>
The fabric is very worn, but would look GREAT if re-wrapped, the rest of it is in fair condition, I believe its been painted although I have never painted it. The under part is cracked altough not at the hinges, and the stopper is not attached but isnt broke
<U>JDM Power Windows</U>
A set of RHD power windows, plain and simple. The switch panels are Grey, but I do have one black one (US Driverside) to include. Both motors work fine. I was having problems getting the DS switch (US PS) to operate both DS and PS windows, but if your LHD you probably dont want the passenger controlling your window anyways! (I didnt!)
<U>JDM Rear Seat</U>
OK, so I'm not like 99% of people selling these and I'm not gonna lie. Not that it's a big secret anyway, but this is NOT a complete set up. You WILL need to have Mounts made for the Hinges, or source some JDM ones. Otherwise everything is there, Both parts of the seat, seatbelts, storage bins, and hinges. The lower portion of the seat is pretty damn clean, but the upper part DOES have a scratch across it as will be pictured.
Seat is actually EDM from a EE8 now that I think about it (carpet is made to go around the ABS box)
The bottom portion is the one for sale, the top isnt the one for sale but is the exact same with a scratch, I'll get a recent pic here in a minute
Thats all I can think of for now, besides multiple other random parts Im gonna list off real quick:
-88 SI Door panels
-89-91 SI Door Panels
-Rear Disc Setup
-B Series Mounts
-NIB set of 93 GSR non ABS axles from Autozone
-OBD2 P72 ECU
-Will be parting out CRX (88 SI Y49) if anyone needs parts although most of the interior is already gone,
Modified by G0crxG0 at 7:03 PM 3/3/2007
Modified by G0crxG0 at 11:06 PM 3/3/2007
Modified by G0crxG0 at 11:42 AM 3/5/2007
Everything is still available as of 3/5/7
New pics of the JDM Front End at the Bottom!
<U>JDM B18c engine </U>
From H Motors online. Exact mileage is unknown as I lost my big CRX file when my comp. crashed, but I believe it to have somewhere in the 60K's on it. I DO have the numbers wrote down somewhere and can verify the milage on it for you if necessary.
It comes with a Skunk2 Intake Manifold to allow clearance, and it has a OBD1 Dizzy and Injectors on it.
I've put about 15K on it myself, NEVER had a issue with it what so ever (except when the wiring was wrong!) Anyways, it has been driven here in the Mid West, so the Oil pan has its fair share of dings but is not punctured or rusted out at all.
The engine has no major leaks, but does leak a bit from the Oil Pan and a bit from the Cam seal, but not enough to ever require adding oil.
Included with the engine are NIB from Acura: Oil Pan Gasket, Timing Belt, Water Pump and WP gasket.
Also included is a stock B series ex. manifold. If your interested and need it, I have a OBD0 to OBD1 ECU harness from Rywire, and a Chipped P28 also from Rywire set to run the engine (has a back up chip aswell)
Most Recent Pic, Im not takin another til I pull it:
How it came from HMO:
<U>J1 Tranny</U>
Bought with my 3rd CRX, I've put around 25K on this between my GSR and old B16, this thing is great, low gears, and NO grinds whatsoever, real smooth shifting.
Best pic I got:
JDM Stuff:
<U>JDM Front End</U>
Almost Forgot, I got a JDM Front End I'll be getting rid of. It is cracked on the Passengerside but has been repaired. It's not the best job but its not exactly noticable. Pictured is the bumper and hood, neither have any major scratches or anything, but are slightly faded in a couple spots due to rubbing off of the importer's paint markings. Included but not pictured are 2 matching black JDM fenders with the sidemarkers. They have a few slight dings, I will get better pics for those interested.
<U>EF8 Glasstop</U>
Includes:
-JDM Maplight (Black)
-JDM Visors (Black with felt and Jap. lettering)
-Headliner (Black)
-Glass and Roof Skin
All neccessary seals are in tact, I followed Mike's How To and removed the Glass from the Rook skin, which has been trimmed to the point it's ready for install almost (minor trimming still needed). The headliner has no scratches or punctures of any kind, neither do the visors or any other parts.
<U>JDM Armrest</U>
The fabric is very worn, but would look GREAT if re-wrapped, the rest of it is in fair condition, I believe its been painted although I have never painted it. The under part is cracked altough not at the hinges, and the stopper is not attached but isnt broke
<U>JDM Power Windows</U>
A set of RHD power windows, plain and simple. The switch panels are Grey, but I do have one black one (US Driverside) to include. Both motors work fine. I was having problems getting the DS switch (US PS) to operate both DS and PS windows, but if your LHD you probably dont want the passenger controlling your window anyways! (I didnt!)
<U>JDM Rear Seat</U>
OK, so I'm not like 99% of people selling these and I'm not gonna lie. Not that it's a big secret anyway, but this is NOT a complete set up. You WILL need to have Mounts made for the Hinges, or source some JDM ones. Otherwise everything is there, Both parts of the seat, seatbelts, storage bins, and hinges. The lower portion of the seat is pretty damn clean, but the upper part DOES have a scratch across it as will be pictured.
Seat is actually EDM from a EE8 now that I think about it (carpet is made to go around the ABS box)
The bottom portion is the one for sale, the top isnt the one for sale but is the exact same with a scratch, I'll get a recent pic here in a minute
Thats all I can think of for now, besides multiple other random parts Im gonna list off real quick:
-88 SI Door panels
-89-91 SI Door Panels
-Rear Disc Setup
-B Series Mounts
-NIB set of 93 GSR non ABS axles from Autozone
-OBD2 P72 ECU
-Will be parting out CRX (88 SI Y49) if anyone needs parts although most of the interior is already gone,
Modified by G0crxG0 at 7:03 PM 3/3/2007
Modified by G0crxG0 at 11:06 PM 3/3/2007
Modified by G0crxG0 at 11:42 AM 3/5/2007
Trending Topics
03-05-2007, 11:17 AM
#12
Honda-Tech Member
Thread Starter
Re: (Smokinsax)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Smokinsax »</TD></TR><TR><TD CLASS="quote">up for y-49 
</TD></TR></TABLE>
haha thanks man, but the Y49's goin bye bye! *tear drops*
</TD></TR></TABLE>haha thanks man, but the Y49's goin bye bye! *tear drops*
03-05-2007, 02:08 PM
#13
Honda-Tech Member
Join Date: Aug 2004
Location: Charleston, SC - Myrtle Beach, SC
Posts: 3,366
Likes: 0
Received 0 Likes
on
0 Posts
Re: (G0crxG0)
Wish I would have known you'd be selling the engine about 4 months ago. 
Damn you've got a few things I'd like...wish I had more funds right now.
Bump for you sucka!
Modified by doitdub at 3:35 PM 3/5/2007
Damn you've got a few things I'd like...wish I had more funds right now.
Bump for you sucka!
Modified by doitdub at 3:35 PM 3/5/2007
03-08-2007, 12:49 AM
#17
An Hero
Join Date: Feb 2007
Location: California
Posts: 897
Likes: 0
Received 0 Likes
on
0 Posts
Re: (JustAnotherRex)
not trying to bug but a few questions. glass top still for sale? how much does it wiegh? what needs to be done to make it fit? condition out of 10? fair price? thanx
03-08-2007, 08:37 AM
#19
The Boot
Join Date: Dec 2001
Location: Arizona, US
Posts: 9,841
Likes: 0
Received 0 Likes
on
0 Posts
Re: (G0crxG0)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by G0crxG0 »</TD></TR><TR><TD CLASS="quote">
haha thanks man, but the Y49's goin bye bye! *tear drops*</TD></TR></TABLE>
haha thanks man, but the Y49's goin bye bye! *tear drops*</TD></TR></TABLE>
04-02-2007, 08:45 PM
#22
Honda-Tech Member
Join Date: Jul 2001
Location: Land of the free, whoever told you that is your enemy
Posts: 6,776
Likes: 0
Received 2 Likes
on
2 Posts
Re: FS: JDM EF8 Parts Glasstop JDM Front End Armrest backseat B18C J1 Tranny and MORE (G0crxG0)
Lemme know price on roof, and JDM leather wrapped SiR Steering wheel.
04-12-2007, 12:11 AM
#24
Honda-Tech Member
Thread Starter
Re: (92gs-r)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 92gs-r »</TD></TR><TR><TD CLASS="quote">has everything been sold?</TD></TR></TABLE>
No, nothing has been sold except a set of Door Panels.
People, I dont have constant internet access so if your interested, pm me an offer or post it here whatever, but your gonna have to be patient. If you really want me to get it email me at SDSRMP@aol.com
also, i'll accept a XBox 360 in trade.
No, nothing has been sold except a set of Door Panels.
People, I dont have constant internet access so if your interested, pm me an offer or post it here whatever, but your gonna have to be patient. If you really want me to get it email me at SDSRMP@aol.com
also, i'll accept a XBox 360 in trade.
