Cleaning out garage: ported head, rollbar, aebs, iacv, map sensor, OMP, BC3+, and more
09-04-2006, 04:24 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Mar 2003
Location: Little Tokyo, CA, USA
Posts: 2,091
Likes: 0
Received 0 Likes
on
0 Posts
Cleaning out garage: tein flex coilovers, ported head, rollbar, iacv, map sensor, and more
* SOLD I/O Port Camera Mount (perfect condtion)
* SOLD vtec outer timing belt cover with bolts & grommet - brand new
* SOLD Used AEBS main studs - Thanks klungemonger
* SOLD Rays/Volks DurAluminum Lock & nuts - Thanks BlueR
* SOLD Bullocks Wheel Locks - Thanks BlueR
* SOLD OMP Carbon Kevlar Racing Seat - Thanks DSG
* SOLD IACV - Thanks 93CX
* SOLD Gauges
* SOLD Baffled Oil Pan
* SOLD Buddy Club BC3+ Cams
* SOLD AEBS B16/ITR Intake Manifold
* SOLD AEBS Headstuds
* SOLD IACV - NONE LEFT
* SOLD Autopower Roll Bar
-- ** MANY WITH SHIPPED PRICES ** --
(If you don't live in the contiguous US or live overseas, these prices do not apply)
Outlaw Engineering thermo spacer
- Needs the gasket removed on intake manifold spacer - not my problem.
- The throttle body & IACV spacers are NEW, never been used.
- Also, it does not include the slightly longer studs.
$55 SHIPPED
Map Sensor Assembly
Picture of the whole assembly
$30 *SHIPPED* - Assembly is off of a 1992 Integra
Modified by Takumi Fujiwara at 12:36 AM 5/9/2008
* SOLD vtec outer timing belt cover with bolts & grommet - brand new
* SOLD Used AEBS main studs - Thanks klungemonger
* SOLD Rays/Volks DurAluminum Lock & nuts - Thanks BlueR
* SOLD Bullocks Wheel Locks - Thanks BlueR
* SOLD OMP Carbon Kevlar Racing Seat - Thanks DSG
* SOLD IACV - Thanks 93CX
* SOLD Gauges
* SOLD Baffled Oil Pan
* SOLD Buddy Club BC3+ Cams
* SOLD AEBS B16/ITR Intake Manifold
* SOLD AEBS Headstuds
* SOLD IACV - NONE LEFT
* SOLD Autopower Roll Bar
-- ** MANY WITH SHIPPED PRICES ** --
(If you don't live in the contiguous US or live overseas, these prices do not apply)
Outlaw Engineering thermo spacer
- Needs the gasket removed on intake manifold spacer - not my problem.
- The throttle body & IACV spacers are NEW, never been used.
- Also, it does not include the slightly longer studs.
$55 SHIPPED
Map Sensor Assembly
Picture of the whole assembly
$30 *SHIPPED* - Assembly is off of a 1992 Integra
Modified by Takumi Fujiwara at 12:36 AM 5/9/2008
09-04-2006, 05:35 AM
#2
Honda-Tech Member
Join Date: Oct 2005
Location: Rhode Island, USA
Posts: 2,254
Likes: 0
Received 0 Likes
on
0 Posts
Re: Cleaning out garage: ported head, rollbar, aebs, iacv, map sensor, OMP, BC3+, and more (Takumi F
would you sell me the plates and hardware from the roll bar?
09-04-2006, 05:44 AM
#3
Honda-Tech Member
Thread Starter
Join Date: Mar 2003
Location: Little Tokyo, CA, USA
Posts: 2,091
Likes: 0
Received 0 Likes
on
0 Posts
Re: Cleaning out garage: ported head, rollbar, aebs, iacv, map sensor, OMP, BC3+, and more (Takumi F
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HondaFerris »</TD></TR><TR><TD CLASS="quote">would you sell me the plates and hardware from the roll bar?</TD></TR></TABLE>
Yea sure, as long as you buy the roll bar
Yea sure, as long as you buy the roll bar
09-04-2006, 06:25 AM
#5
Honda-Tech Member
Join Date: May 2002
Location: Oxford, MI, USA
Posts: 3,601
Likes: 0
Received 0 Likes
on
0 Posts
Can you IM me with this info...
What application are the AEBS main studs for?
What are the upgraded internals in the B16 head and how complete is the head?
Thanks.
What application are the AEBS main studs for?
What are the upgraded internals in the B16 head and how complete is the head?
Thanks.
09-04-2006, 06:59 AM
#6
Honda-Tech Member
Thread Starter
Join Date: Mar 2003
Location: Little Tokyo, CA, USA
Posts: 2,091
Likes: 0
Received 0 Likes
on
0 Posts
Re: (klungemonger)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by klungemonger »</TD></TR><TR><TD CLASS="quote">Can you IM me with this info...
What application are the AEBS main studs for?
What are the upgraded internals in the B16 head and how complete is the head?
Thanks.</TD></TR></TABLE>
I'm going to post it here so others can also benefit from the information:
Main studs: They are for your main caps (I think that's the word for it). Basically, these bolts will go through your vtec block girdle and the other caps that the girdle does not extend to. I think they are 5 caps in total. I haven't actualy counted all the studs since I disassembled it (I didn't assemble the motor and I'm not an engine builder) so I can't give your the correct terms. But I think you get the idea. The caps bolt up from the bottom UP to the crank. You would use the main studs here.
B16 head Internals: As stated in the initial thread, they have Yellow ITR outers all the way around with portflow inners (I was recommended this setup by Tom from Portflow. He said this is a proven setup up to 12mm of lift. All hardware was bought new, I didn't buy anything used for the head when I used it.
It comes with the temp sensors & I can include a vtec solenoid. However the vtec oil pressure sensor does not come with a plug. If you decide to buy it at the price I have given, I will include the valve cover. Basically, you would need a distributor. It comes with the rockers, caps, etc...
What application are the AEBS main studs for?
What are the upgraded internals in the B16 head and how complete is the head?
Thanks.</TD></TR></TABLE>
I'm going to post it here so others can also benefit from the information:
Main studs: They are for your main caps (I think that's the word for it). Basically, these bolts will go through your vtec block girdle and the other caps that the girdle does not extend to. I think they are 5 caps in total. I haven't actualy counted all the studs since I disassembled it (I didn't assemble the motor and I'm not an engine builder) so I can't give your the correct terms. But I think you get the idea. The caps bolt up from the bottom UP to the crank. You would use the main studs here.
B16 head Internals: As stated in the initial thread, they have Yellow ITR outers all the way around with portflow inners (I was recommended this setup by Tom from Portflow. He said this is a proven setup up to 12mm of lift. All hardware was bought new, I didn't buy anything used for the head when I used it.
It comes with the temp sensors & I can include a vtec solenoid. However the vtec oil pressure sensor does not come with a plug. If you decide to buy it at the price I have given, I will include the valve cover. Basically, you would need a distributor. It comes with the rockers, caps, etc...
09-04-2006, 07:42 AM
#7
Honda-Tech Member
Join Date: May 2002
Location: Oxford, MI, USA
Posts: 3,601
Likes: 0
Received 0 Likes
on
0 Posts
OK let me rephrase...I know what main studs do, I meant what application are they for? But I'm assuming since you mentioned the girdle its for ITR/GSR...
Thanks for the info...
Thanks for the info...
Trending Topics
09-04-2006, 08:16 AM
#8
Honda-Tech Member
Thread Starter
Join Date: Mar 2003
Location: Little Tokyo, CA, USA
Posts: 2,091
Likes: 0
Received 0 Likes
on
0 Posts
Re: (klungemonger)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by klungemonger »</TD></TR><TR><TD CLASS="quote">OK let me rephrase...I know what main studs do, I meant what application are they for? But I'm assuming since you mentioned the girdle its for ITR/GSR...
Thanks for the info...</TD></TR></TABLE>
Yes, they for vtec blocks. Since it was on my B18C1 block, I will only say that they will only work on B18C blocks.... sorry for the confusion.
Most of the motors parts on this sale are from my GSR block/ ITR/B16 head.
I also have some Eagle rods. Some are not in perfect condition, but I'll take a picture nonetheless and see if there are any takers.
Thanks for the info...</TD></TR></TABLE>
Yes, they for vtec blocks. Since it was on my B18C1 block, I will only say that they will only work on B18C blocks.... sorry for the confusion.
Most of the motors parts on this sale are from my GSR block/ ITR/B16 head.
I also have some Eagle rods. Some are not in perfect condition, but I'll take a picture nonetheless and see if there are any takers.
09-04-2006, 09:19 AM
#10
Honda-Tech Member
Thread Starter
Join Date: Mar 2003
Location: Little Tokyo, CA, USA
Posts: 2,091
Likes: 0
Received 0 Likes
on
0 Posts
Re: (klungemonger)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by klungemonger »</TD></TR><TR><TD CLASS="quote">alright well count up the studs and make sure they're all there...and with the nuts/washers or whatever they normally come with...thanks.</TD></TR></TABLE>
They are all in a ziplock bags, and I know they are all there... I didn't feel like getting my hands all oily and then snapping a photo, getting my camera all dirty this morning.
But don't worry, I'll get around to taking those photos outside of the ziplock bag when I go organize the garage later today.
They are all in a ziplock bags, and I know they are all there... I didn't feel like getting my hands all oily and then snapping a photo, getting my camera all dirty this morning.
But don't worry, I'll get around to taking those photos outside of the ziplock bag when I go organize the garage later today.
09-04-2006, 05:02 PM
#13
Honda-Tech Member
Thread Starter
Join Date: Mar 2003
Location: Little Tokyo, CA, USA
Posts: 2,091
Likes: 0
Received 0 Likes
on
0 Posts
Re: Cleaning out garage: ported head, rollbar, aebs, iacv, map sensor, OMP, BC3+, and more (Takumi F
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by OB*GYN_MCxRhettxMeistern »</TD></TR><TR><TD CLASS="quote">seat is dope 
</TD></TR></TABLE>
It would be dope for me if someone bought it.
I have to take new pictures of that thing, it looks so dirty... those white things aren't holes, there is some debris on there... I was too lazy to even wipe it off with my hands.
</TD></TR></TABLE>It would be dope for me if someone bought it.
I have to take new pictures of that thing, it looks so dirty... those white things aren't holes, there is some debris on there... I was too lazy to even wipe it off with my hands.
09-06-2006, 07:28 AM
#15
Honda-Tech Member
Thread Starter
Join Date: Mar 2003
Location: Little Tokyo, CA, USA
Posts: 2,091
Likes: 0
Received 0 Likes
on
0 Posts
Re: (klungemonger)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by klungemonger »</TD></TR><TR><TD CLASS="quote">confirmation on the main studs? just waiting for your word man...</TD></TR></TABLE>
I'll try to post those pictures up today.
I'll try to post those pictures up today.
09-06-2006, 08:21 AM
#17
Honda-Tech Member
Join Date: May 2002
Location: Oxford, MI, USA
Posts: 3,601
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Takumi Fujiwara)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Takumi Fujiwara »</TD></TR><TR><TD CLASS="quote">I'll try to post those pictures up today.</TD></TR></TABLE>
Pics are no big deal, as long as you guarantee all the little pieces are there I'll take your word for it, that's all I need.
Pics are no big deal, as long as you guarantee all the little pieces are there I'll take your word for it, that's all I need.
09-06-2006, 08:29 AM
#18
Honda-Tech Member
Thread Starter
Join Date: Mar 2003
Location: Little Tokyo, CA, USA
Posts: 2,091
Likes: 0
Received 0 Likes
on
0 Posts
Re: (klungemonger)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by klungemonger »</TD></TR><TR><TD CLASS="quote">Pics are no big deal, as long as you guarantee all the little pieces are there I'll take your word for it, that's all I need. </TD></TR></TABLE>
I know they are all there because I was very careful & organized when I disassembled my motor... but just in case, give me about 30 minutes, I'll double check.
</TD></TR></TABLE>I know they are all there because I was very careful & organized when I disassembled my motor... but just in case, give me about 30 minutes, I'll double check.
09-06-2006, 08:34 AM
#19
Honda-Tech Member
Thread Starter
Join Date: Mar 2003
Location: Little Tokyo, CA, USA
Posts: 2,091
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Takumi Fujiwara)
To the people that PMed me:
My PMs keep freezing today. So I'll answer here:
BlueR: $100 shipped, paypal
BradStard: Thanks!
ravinR68: You can see in the pictures that they say "AURFA" on them. I don't know what size they are except that they fit inside the dash bezel that holds 2 gauages in an Integra (3rd gen). I can measure them if you want. The gauges were made to order with that name & these happened to be excess from the customer's order. I wish it said something cooler besides Aurfa... but what can you do.
My PMs keep freezing today. So I'll answer here:
BlueR: $100 shipped, paypal
BradStard: Thanks!
ravinR68: You can see in the pictures that they say "AURFA" on them. I don't know what size they are except that they fit inside the dash bezel that holds 2 gauages in an Integra (3rd gen). I can measure them if you want. The gauges were made to order with that name & these happened to be excess from the customer's order. I wish it said something cooler besides Aurfa... but what can you do.
09-06-2006, 09:23 AM
#20
Honda-Tech Member
Thread Starter
Join Date: Mar 2003
Location: Little Tokyo, CA, USA
Posts: 2,091
Likes: 0
Received 0 Likes
on
0 Posts
Re: (klungemonger)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by klungemonger »</TD></TR><TR><TD CLASS="quote">Pics are no big deal, as long as you guarantee all the little pieces are there I'll take your word for it, that's all I need. </TD></TR></TABLE>
Pics are now up, PMs are still not working for me right now. Please post in the thread.
</TD></TR></TABLE>Pics are now up, PMs are still not working for me right now. Please post in the thread.
09-06-2006, 09:47 AM
#22
Honda-Tech Member
Thread Starter
Join Date: Mar 2003
Location: Little Tokyo, CA, USA
Posts: 2,091
Likes: 0
Received 0 Likes
on
0 Posts
Re: (klungemonger)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by klungemonger »</TD></TR><TR><TD CLASS="quote">Sweet thanks! Will you do $30 shipped for the main studs? Let me know, I can pay you today...</TD></TR></TABLE>
I'll do $35 shipped.
I'll do $35 shipped.
