FS: May June RACE PARTS
#26
Honda-Tech Member
Join Date: May 2002
Location: cali
Posts: 13,483
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS: May June RACE PARTS
Slammed_93_Hatch. Those are awesome pieces, I had the SRR ones but the problem was with the bolt for the "ball joint", as it is tapered and not generally found in any store. Did you have those two bolts machined as well? I saw that some of the 240 guys had this type of setup and was curious if the companies who made theirs had the same size bolts that a honda would, but never went through with it.
Great product, especially since it is COMPLETE down to the nuts and bolts.
Great product, especially since it is COMPLETE down to the nuts and bolts.
Last edited by slammed_93_hatch; 05-26-2010 at 12:36 PM.
#28
Honda-Tech Member
Join Date: Nov 2006
Location: Antarctica, United States
Posts: 246
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS: May June RACE PARTS
Stoptech ST-40 Carbotech XP10 Pads, used for only one weekend. Given these were used with a BBK (better dissipation of heat, thus less wear), the amount of wear is minimal, approx. 85-90% of pad left. I switched cars, I use the same pads on my S2000.
Purchased for $200, will let go for $105 shipped.
Please contact me if you have any questions.
Purchased for $200, will let go for $105 shipped.
Please contact me if you have any questions.
#31
Honda-Tech Member
Re: FS: May June RACE PARTS
For Sale:
Acura RSX TypeS 11.3" Front Big Brake Upgrade for ALL 94-01 Acura Integra's.
Includes:
- 2 Front Brake Calipers and Brackets (brackets were machine by FastBrakes for proper clearance). The driver side caliper is only a few months old. Both calipers are in perfect working condition.
- I will include 2 brand new front rotors re-drilled to fit 4x100. They are hubcentric and will fit perfectly without any issues.
- Brand new set of Hawk HP Plus+ Brake Pads. Less than 100 miles on (paid $115)
This is a HUGE upgrade and supplies TONS of stopping power. Very powerful setup. Will clear all 16" and only a select few 15" wheels so I've heard (Volk TE-37, Team Dynamics, and a few other high dollar wheels).
$330 shipped
Acura RSX TypeS 11.3" Front Big Brake Upgrade for ALL 94-01 Acura Integra's.
Includes:
- 2 Front Brake Calipers and Brackets (brackets were machine by FastBrakes for proper clearance). The driver side caliper is only a few months old. Both calipers are in perfect working condition.
- I will include 2 brand new front rotors re-drilled to fit 4x100. They are hubcentric and will fit perfectly without any issues.
- Brand new set of Hawk HP Plus+ Brake Pads. Less than 100 miles on (paid $115)
This is a HUGE upgrade and supplies TONS of stopping power. Very powerful setup. Will clear all 16" and only a select few 15" wheels so I've heard (Volk TE-37, Team Dynamics, and a few other high dollar wheels).
$330 shipped
#33
Honda-Tech Member
Join Date: Feb 2009
Location: Memphis, TN
Posts: 330
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS: May June RACE PARTS
Sorry for the useless post but I wanted to express my gratitude for the previous posters and the AWESOME prices on killer stuff that they're posting up. Keep 'em coming! Wish I could afford those 15" Enkei rollers after my coilovers!
#34
Honda-Tech Member
Re: FS: May June RACE PARTS
This is brand new only took it out of the box to inspect it to make sure there was no damage from shipping.
This is for a Evo 8/9 but can be used on other cars.
I ordered it with the standard 200 side plates as the evo ones are horrible looking to me.
600 shipped OBO
This is for a Evo 8/9 but can be used on other cars.
I ordered it with the standard 200 side plates as the evo ones are horrible looking to me.
600 shipped OBO
#35
Honda-Tech Member
Re: FS: May June RACE PARTS
I have 2 sets of brand new H&R 60mm diameter 180mm length race springs for sale.
1 set is RF180120 (approx 686 lb)
1 set is RF180130 (approx 743 lb)
http://www.hrsprings.com/applications/60mm_id_springs
$75 per pair plus shipping from Blaine, Wa 98230.
1 set is RF180120 (approx 686 lb)
1 set is RF180130 (approx 743 lb)
http://www.hrsprings.com/applications/60mm_id_springs
$75 per pair plus shipping from Blaine, Wa 98230.
#36
Honda-Tech Member
Join Date: Dec 2003
Location: True Honda Enthusiast
Posts: 12,680
Likes: 0
Received 1 Like
on
1 Post
Re: FS: May June RACE PARTS
Stance 9k springs 2.5" ID x 8" long
$75 shipped
Stance GR Pro coilovers for EVO 8-9. 15 way adjustable. These are in pretty rough condition but can be used to rebuild or for spare parts.
$100 shipped
Hotchkis camber plates for EP3/RSX. Mint condition.
$200 shipped
$75 shipped
Stance GR Pro coilovers for EVO 8-9. 15 way adjustable. These are in pretty rough condition but can be used to rebuild or for spare parts.
$100 shipped
Hotchkis camber plates for EP3/RSX. Mint condition.
$200 shipped
#38
Honda-Tech Member
Join Date: Dec 2003
Location: socal, ca, usa
Posts: 330
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS: May June RACE PARTS
B16 head used with complete stock valve train_______350.00 obo
Sparco speed seat black_______________________________150.00 obo
Sparco fighter seat___________________________________350.00
Must sell by the end of the week.
Pm me for pics , prices do not include shipping
Sparco speed seat black_______________________________150.00 obo
Sparco fighter seat___________________________________350.00
Must sell by the end of the week.
Pm me for pics , prices do not include shipping
#39
Honda-Tech Member
iTrader: (4)
Re: FS: May June RACE PARTS
* No Dibbbbbzzzz - Toooooo Many Flakes
* PRICES FIRM ........... MAY Negotiate
* SERIOUS BUYERS ONLY 909 728 9967
* AIM SERIOUS INQUIRIES : JDMJUNKE1
FAQ: WHY AM I SELLING? Having another kid in DEC. and Wedding is scheduled for SEP. 17th < ==== Need the loot and the space
BOTH for $4k
$2000 picked up 2200 OBO SHIPPED!!!!!!!!!!!! NO HIDDEN FEES!
B16a2
Head Fully worked by KG/
5 angle Valve job
Port Matched
Ported & polished
BC Cams ( race spec )
Omni Dual Valvesprings
Omni Titanium retainers
Omni OS/HC Valves
VTEC solenoid - NIB
Password Cam Seal - NIB
Buddy Club Gold Cam gears 6-bolt
Bronze Valve guides
$2200 picked up $2400 OBO SHIPPED!!!!!!!!!!!! NO HIDDEN FEES!
B18c1 1.9737L
Bottom End ( all new parts nothing used )
Block Guarded
Micro-polished Lightened Balanced crank 10k revs (can't remember if it was knife edged, one day ill drop the pan & check))
Custom H/C JE pistons full floating pistons & pins
Scat H-beam Rods
OEM Bearings
OEM Type r Oil Pump
OEM Type r H2o Pump
OEM t-belt, & tensioner
New Crank & rear main seals
* PRICES FIRM ........... MAY Negotiate
* SERIOUS BUYERS ONLY 909 728 9967
* AIM SERIOUS INQUIRIES : JDMJUNKE1
FAQ: WHY AM I SELLING? Having another kid in DEC. and Wedding is scheduled for SEP. 17th < ==== Need the loot and the space
BOTH for $4k
$2000 picked up 2200 OBO SHIPPED!!!!!!!!!!!! NO HIDDEN FEES!
B16a2
Head Fully worked by KG/
5 angle Valve job
Port Matched
Ported & polished
BC Cams ( race spec )
Omni Dual Valvesprings
Omni Titanium retainers
Omni OS/HC Valves
VTEC solenoid - NIB
Password Cam Seal - NIB
Buddy Club Gold Cam gears 6-bolt
Bronze Valve guides
$2200 picked up $2400 OBO SHIPPED!!!!!!!!!!!! NO HIDDEN FEES!
B18c1 1.9737L
Bottom End ( all new parts nothing used )
Block Guarded
Micro-polished Lightened Balanced crank 10k revs (can't remember if it was knife edged, one day ill drop the pan & check))
Custom H/C JE pistons full floating pistons & pins
Scat H-beam Rods
OEM Bearings
OEM Type r Oil Pump
OEM Type r H2o Pump
OEM t-belt, & tensioner
New Crank & rear main seals
#40
Race Car Part Out
Parting out my 93 civic hatch H4 honda challenge car. haven't pulled everything off of it, so I don't have all the pictures of stuff yet. But if you need anything of a civic hatch, let me know
All parts have about 4 track days on them. No real wear and tear.
All Prices without shipping, local pickup welcome in Sacramento, CA. PM for shipping rates
Civic Si Engine and trans- motor has 27k on it and the transmission is rebuilt with about 10 miles on it. Has a prostreet 8.5 lb flywheel and a ACT 6 puck clutch.
$850
Civic Si ECU- P28
$120
Integra Front Sway Bar
$50
Koyo Dual Core radiator- About 100 miles on it.
Civic Si Mater cylinder - 7/8
$25
AEM intake 92-95 civic si, brand new only has about 100 miles on it.
$220
ESS 2.3 Liter AFFF Fire suppression system, Never used, hardlines not pictured but I will include all of the stuff needed.
$350
2 Sparco Speed Seats- expired FIA tags- will include sliders (one not sparco) if wanted.
$150
DC Sports 4-1 Ceramic Header- One ding on the underside from going off at thunderhill. has about 100 miles on it.
$200
Hawk Blue Race Pads- New in box
$90
Skunk2 Exhaust System and Custom test pipe- again about 100 miles on it. I only have pics of the rear section today but will post the entire system later.
$400
All parts have about 4 track days on them. No real wear and tear.
All Prices without shipping, local pickup welcome in Sacramento, CA. PM for shipping rates
Civic Si Engine and trans- motor has 27k on it and the transmission is rebuilt with about 10 miles on it. Has a prostreet 8.5 lb flywheel and a ACT 6 puck clutch.
$850
Civic Si ECU- P28
$120
Integra Front Sway Bar
$50
Koyo Dual Core radiator- About 100 miles on it.
Civic Si Mater cylinder - 7/8
$25
AEM intake 92-95 civic si, brand new only has about 100 miles on it.
$220
ESS 2.3 Liter AFFF Fire suppression system, Never used, hardlines not pictured but I will include all of the stuff needed.
$350
2 Sparco Speed Seats- expired FIA tags- will include sliders (one not sparco) if wanted.
$150
DC Sports 4-1 Ceramic Header- One ding on the underside from going off at thunderhill. has about 100 miles on it.
$200
Hawk Blue Race Pads- New in box
$90
Skunk2 Exhaust System and Custom test pipe- again about 100 miles on it. I only have pics of the rear section today but will post the entire system later.
$400
Last edited by niteridaV2; 06-21-2010 at 09:45 AM.
#41
Honda-Tech Member
Join Date: May 2007
Location: Monrovia, CA, USA
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS: May June RACE PARTS
You can see the original ad here http://nasaforums.com/viewtopic.php?f=11&t=27264
Car is located in Monrovia, in Southern California
The car is still complete, and parts won't be removed until they have confirmed buyers. Anyone who is interested in the engine and drive train is welcome to come hear the car run before it has been taken apart.
B16A + S1 cable trans with wave trac diff.(0 miles on trans since rebuild), rebuilt head with 3 angle valve job by Vellios in So Cal, early ITR cams, ARP head studs, Blox intake manifold, Baffled oil pan, New oil pump, Toda Header, Skunk 2 cam gears, Skunk 2 valve springs, fidanza aluminum flywheel, exedy stage 1 clutch, Hondata phenolic manifold gasket, AEM fuel rail, B&M fuel pressure gauge, B&M fuel pressure regulator, P28 ECU & custom wiring harness - $3000.00, $2500.00 without header(will not separate any of this stuff except header)
Used Toda 4-2-1 race header $500.00
Apex'i World Sport 2 Exhaust $200.00
Griffin EF radiator $150.00
Samco radiator hoses $75.00
Spal 12" fan $75.00
Setrab oil cooler (brand new never installed) $75.00
Koni sport shocks revalved to SPSS3 specs with 650lb front and 800lb rear springs and ground control 1" lower shock mounts(includes helper springs) 0 miles on this stuff $1600.00
Odyssey battery $50.00
Rolling chassis without suspension on 13" stock wheels(will be body, brakes, steering, control arms, etc. only) $1500.00
15X7.5 Rota Slipstreams with 225/45-15 Avon R compound tires(never used, but old) $500.00
Used sparco corsa seat $300.00
Please contact me at 562-533-4701 or kostritzer@gmail.com
Prices are obo, I will however ignore ridiculous low ball offers!
Car is located in Monrovia, in Southern California
The car is still complete, and parts won't be removed until they have confirmed buyers. Anyone who is interested in the engine and drive train is welcome to come hear the car run before it has been taken apart.
B16A + S1 cable trans with wave trac diff.(0 miles on trans since rebuild), rebuilt head with 3 angle valve job by Vellios in So Cal, early ITR cams, ARP head studs, Blox intake manifold, Baffled oil pan, New oil pump, Toda Header, Skunk 2 cam gears, Skunk 2 valve springs, fidanza aluminum flywheel, exedy stage 1 clutch, Hondata phenolic manifold gasket, AEM fuel rail, B&M fuel pressure gauge, B&M fuel pressure regulator, P28 ECU & custom wiring harness - $3000.00, $2500.00 without header(will not separate any of this stuff except header)
Used Toda 4-2-1 race header $500.00
Apex'i World Sport 2 Exhaust $200.00
Griffin EF radiator $150.00
Samco radiator hoses $75.00
Spal 12" fan $75.00
Setrab oil cooler (brand new never installed) $75.00
Koni sport shocks revalved to SPSS3 specs with 650lb front and 800lb rear springs and ground control 1" lower shock mounts(includes helper springs) 0 miles on this stuff $1600.00
Odyssey battery $50.00
Rolling chassis without suspension on 13" stock wheels(will be body, brakes, steering, control arms, etc. only) $1500.00
15X7.5 Rota Slipstreams with 225/45-15 Avon R compound tires(never used, but old) $500.00
Used sparco corsa seat $300.00
Please contact me at 562-533-4701 or kostritzer@gmail.com
Prices are obo, I will however ignore ridiculous low ball offers!
#42
Honda-Tech Member
Join Date: Feb 2002
Location: Orange, CALIFORNIA, USA
Posts: 1,642
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS: May June RACE PARTS
SPECIAL PROJECTS MOTOR SPORTS-
Mid Season Parts Blow out-
Every year we try to have a clean up of obsolete or unwanted parts- We have over the last couple of seasons moved away from using B Series to the K-Series. Consequently I have heaps of B Series parts, too many to list here that we need to get Rid of.
You can Call me on any of these items-
Kiwi - 714 998 1258
kiwiowen@hotmail.com
(1) B-18-C Type R (Mugen) Crank shaft $200.00
(4) B-18-C GSR Crankshafts $200.00
(1) B-18-B Block $200.00
(1) B18C Block Needs Sleeved $50.00
(2) B16A Blocks $50.00 each
Heaps of B18/B16 Engine and Trans Monts, PS/ AC Brackets, Alternator Mounts, Alternators Starters, all $5.00 each
1 Set- Brand New GEIGER B18C Race Cams (Toda Specs) $400.00
2 Sets- Brand New K-20 rsx (S) Cams $400.00 obo.
B16A Used- Rods and Pistons all good several sets $40.00 set.
4 Brand New Borbett Alloy Wheels 15x9x4x100 $600.00 OBO
Skunk DC2/EG With Brand new HardRace Bushings. $120.00
JG Inlet Manifold -$40.00
B18-B20 Big Inlet Manifold- $40.00
New Pro Series Inlet- $120.00 To suit GSR Head. (Can easily be drilled for B16 or Type R)
New- $160.00
Brand New Hardrace Harware- No press Necessary $90.00
HARDRACE- EK Civic Brand New- $150.00 Front Upper Control Arms (Camber Kit)
HARDRACE- EK Civic Rear LCA's - Brand New- $80.00 (2 Sets available) BOTH SOLD
4 New Takeoffs- RSX 17"X7" $300.00 OBO
Mid Season Parts Blow out-
Every year we try to have a clean up of obsolete or unwanted parts- We have over the last couple of seasons moved away from using B Series to the K-Series. Consequently I have heaps of B Series parts, too many to list here that we need to get Rid of.
You can Call me on any of these items-
Kiwi - 714 998 1258
kiwiowen@hotmail.com
(1) B-18-C Type R (Mugen) Crank shaft $200.00
(4) B-18-C GSR Crankshafts $200.00
(1) B-18-B Block $200.00
(1) B18C Block Needs Sleeved $50.00
(2) B16A Blocks $50.00 each
Heaps of B18/B16 Engine and Trans Monts, PS/ AC Brackets, Alternator Mounts, Alternators Starters, all $5.00 each
1 Set- Brand New GEIGER B18C Race Cams (Toda Specs) $400.00
2 Sets- Brand New K-20 rsx (S) Cams $400.00 obo.
B16A Used- Rods and Pistons all good several sets $40.00 set.
4 Brand New Borbett Alloy Wheels 15x9x4x100 $600.00 OBO
Skunk DC2/EG With Brand new HardRace Bushings. $120.00
JG Inlet Manifold -$40.00
B18-B20 Big Inlet Manifold- $40.00
New Pro Series Inlet- $120.00 To suit GSR Head. (Can easily be drilled for B16 or Type R)
New- $160.00
Brand New Hardrace Harware- No press Necessary $90.00
HARDRACE- EK Civic Brand New- $150.00 Front Upper Control Arms (Camber Kit)
HARDRACE- EK Civic Rear LCA's - Brand New- $80.00 (2 Sets available) BOTH SOLD
4 New Takeoffs- RSX 17"X7" $300.00 OBO
Last edited by KIWI; 06-30-2010 at 07:53 AM.
#43
Honda-Tech Member
Re: FS: May June RACE PARTS
FOR SALE - KAAZ Limited Slip differential for K series.
Plate style 1.5 way,great condition with very low miles,recently inspected,set to 60% lock.I can set to 100% or 30% also if desired,but I found 60% was best.Includes speedo gear.
$700 shipped,paypal fees included
PM me if you're interested.
Plate style 1.5 way,great condition with very low miles,recently inspected,set to 60% lock.I can set to 100% or 30% also if desired,but I found 60% was best.Includes speedo gear.
$700 shipped,paypal fees included
PM me if you're interested.
Last edited by JW racing; 06-23-2010 at 12:15 PM.
#46
Re: FS: May June RACE PARTS
New in bag, never used, TeamDI Delta 5 Nomex Gloves, 2 pairs, Black Medium and Red Medium, they run slightly small.
These sell for $100 new, I'll take $50/pr.
These sell for $100 new, I'll take $50/pr.
#47
Re: FS: May June RACE PARTS
Beaks Swaybar Reinforcement Kit
Fits EG/DC 92-95 Civic 94-01 Integras
BRAND NEW, Never used. Bolts/hardware included!
$60.00 Shipped & insured!
Fits EG/DC 92-95 Civic 94-01 Integras
BRAND NEW, Never used. Bolts/hardware included!
$60.00 Shipped & insured!
Last edited by bokals; 06-26-2010 at 11:11 AM.
#48
Honda-Tech Member
Join Date: Jul 2003
Location: nj
Posts: 4,136
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS: May June RACE PARTS
i got 2 geforce 5 point harness for sale i only used them for 2 track events.
comes with the regular bolt on ends and also the snap on ones.
150shipped for both pics will be up soon.
comes with the regular bolt on ends and also the snap on ones.
150shipped for both pics will be up soon.
#49
Honda-Tech Member
Join Date: May 2000
Location: SoCal
Posts: 1,612
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS: May June RACE PARTS
FREE to any track junkie: Set of used DC2 front rotors (4 lug). Sold the car, buyer didn't return to pick up, I have no use for them.
I had these in storage for a long time, don't recall if they need turning or are ready to go. Pick up in Granada Hills (near 405 and 118 Frwy) or Woodland Hills (101 & Topanga), CA.
PM if interested.
I had these in storage for a long time, don't recall if they need turning or are ready to go. Pick up in Granada Hills (near 405 and 118 Frwy) or Woodland Hills (101 & Topanga), CA.
PM if interested.
#50
Honda-Tech Member
Re: FS: May June RACE PARTS
Here I have a set of Wilwood dynalite 120-6806 calipers for sale.
Good condition,not alot of hours on them. This is the caliper set only,you have to get rotors and adapter brackets and hardware for your spindle to mount the calipers.Fastbrakes has that if you need for like 300.
I will throw in 2 pair of slightly used Performance Friction 01 compound pads as well.
$280 shipped to lower 48 via priority mail including paypal fees
Also have a ASR Adjustable 24mm sway bar for Eg/DC in great shape. Brace not included, No endlinks,but does have D brackets.
$170 shipped with paypal fees included.
PM me
Good condition,not alot of hours on them. This is the caliper set only,you have to get rotors and adapter brackets and hardware for your spindle to mount the calipers.Fastbrakes has that if you need for like 300.
I will throw in 2 pair of slightly used Performance Friction 01 compound pads as well.
$280 shipped to lower 48 via priority mail including paypal fees
Also have a ASR Adjustable 24mm sway bar for Eg/DC in great shape. Brace not included, No endlinks,but does have D brackets.
$170 shipped with paypal fees included.
PM me
Last edited by JW racing; 06-28-2010 at 03:15 PM.