loudes13

Tire Tail and Da'Lan receiver hitch for a Honda S2000. The tire tail probably fits other cars, but the hitch is designed for a S2000. Please call me (after 5PM on weekdays) at 847-417-5611.

Transport your tires without a trailer.

Used for track days, autocross, time trials, or HPDE driving events.

Package deal for $260.



How it works (not an S2000, but an example)





S2000 Hitch - $100

Tire Tail - $180



Contact me at 847 417 5611 (after 5PM) or loudes13 at yahoo . com located NW of Chicago.

KIWI

FOR SALE AS IS or PARTING OUT-
2001 ACURA GSR – CLEAN TITLE.
SORRY- SOLD!

Austin

I/O Port Camera Mount $80 – brand new, never used



Ingalls Rear Camber Kit, Integra/Civic $60



Ingalls Front Camber Kit $120



Samco Hoses, Civic/D16 - $60




Autometer 3700 5" Sport Comp Tachometer, 10,000rpm - $80 Brand new, it was mounted for fitment purposes then removed.

KIWI

CRANKSHAFTS-
I'm moving to a new building, help me get rid of all this B Series stuff...


B18C Type R Mugen Crank Std. ****SOLD****
B18C Type R Crank just reground 0.10 under -$180.00
B18C GSR Crank Std. - $180.00
B18C GSR Crank Std. -***SOLD***
B18C GSR Crank Std. will clean up with polish -$150.00
B18C GSR Crank Std. will clean up with polish -$100.00
B18A1 Good Block with Caps -$200.00
B16A Complete Short Block -Good Crank $250.00
B18C1 Bare Block with girdle -$200.00 **SOLD**
Also Available...
SOLD***Type R Cams,***
Race Cams- Brand New Geiger cams (Same Specs as TODA-C)$250.00, 1 Set Wicked Race Cams $300.00***SOLD***) 1 SET Crower Race Cams $300.00. Stock Cams B16a just ask...




GSR Cylinder Head, Ported, Skunk II Springs etc. $500.00




BRAND NEW Still in the box- (I have 2 Sets)
RSX-Type S Cams $250.00 pr. Shipped

PM Me or call Kiwi - Work: 714 998 1258 Cel: 714 585 4233

Heaps of every kind of B Series engine accessories brackets, Engine mounts, Gearbox brackets Type R lower G/box covers etc. You name it I probably have three of them!
B Series Gearbox Casings. Gear box parts... boxes full.

petwhookie

iTrader: (-1)

Rcrew splitter brackets for dc2, $60

KIWI

HARDRACE EF/EG/DC2 Front upper control arm Hard Rubber bushings already fitted to Eye bolts. No Press required.

$60.00 shipped

PM Me or call Kiwi - Work: 714 998 1258 Cel: 714 585 4233

TeamNextGenChris

Name:Chris Martin
Location:Roanoke,VA
Contact: PM here
Price:$various.Shipping not included.

-Momo steering wheel adapter hub for 92-95 Civic,94-01 Integra.Includes horn sweeper arm and rubber cover boot.
$45 for Momo hub


-Clutch Specialties dual diaphragm pressure plate with sprung brass puck clutch.B series hydro.I ran this clutch for less than 3k miles on my low boost setup,with the intention of using it on my new engine,but I never completed it.CS doesn't really have stages or anything,as they build each clutch to what you need.I told them I needed a clutch for street/strip use in a 500WHP car on slicks,and this is what they sent.Worked great on the street,very driveable.
$225

-Clutchmasters stage 3 Pressure Plate.B series hydro.Has friction surface has some scoring.Would be good for some extra holding power over a stock PP.
$25

-Tuner Toys oil take off block.For back of block to get oil feed.BRAND NEW!
$20

-Grounding kit.Splitfire.It came off my JDM R engine,straight from the importer,so it's JDM!!11
$20

-Autometer gauges/pods.
SOLD: 2-5/8" Boost gauge
$35: 2-1/16" A/F gauge
$25: OEM A-pillar,with pods attached,dyed black.Couple scratches in dye as seen in pic,but overall very good shape.92-95 Civic coupe/hatch.

JDM ITR 98+ parts:
-Alternator
$100
-A/C mount
$35
-P/S pump,includes mounts
$40
-Intake arm
$25

-Coolant line kit for GT turbo.These are the fittings and line you’ll need to build a coolant line kit for a GT turbo. 7’ of -6 line,and the necessary fittings to connect to the turbo and terminate to wherever on your engine you pick up and return coolant.You’ll just need two fittings to plumb in to whatever source you choose.Paid $136 total.Brand new.
$60
WILL sell any individual parts also.PM with what you want.

Autometer



JDM ITR parts


Clutch SPecialties



Clutchmaster PP



Oil T fitting


Ground block


MOMO hub


AN coolant lines

S.Rothschild

Hondata s300 on a P28 ecu used ….

SOLD!!!!!

Thank you

r_wannabe

Is the ecu in good condition? Working?

9seccivicsi

Sparco speed seat (black) fairly new sat in maybe 4 times..... 150.00 obo+ shipping

Sparco fighter seat all black with back pads (black) great condition ......350.00+ shipping

B16 head completely stock .................................................. ..........350.00 + shipping

GSRCRXsi

Cryo-Stop Integra/Civic rotors 10.3" - $SOLD

Hawk HP+ race brake pads ITR Integra Type R" - $SOLD

vbspec

****** NEW PRICE*********

GSR transmission purchased directly from Honda, with MFactory 4.92 Final Drive, OEM ITR Diff, Syncrotech Carbon Syncros and all parts have been friction coated. The trans was built by the previous owner of my car when he converted it to a Honda-Challenge car. He had 3 events on it and I ran it for 4 weekend and during my comp school. Shifts like butter, and has very few miles on it. Asking $ 1100 obo

dai-18t

For Sale: MoTeC ADl dash display logger with back light enabled and connector with wiring.
Very wel looked after and in top condition.
Asking $5500.00(australian dollars) as I do live in australia.





Serial number can be supplied on request from interested parties.

Regards Alex from Australia.

blackGSRcoupe94

still waiting on a reply from petwookie about Rcrew splitter brackets, but i think he flaked. thanks for wasting my time bro.

BlueTeg

iTrader: (2)

all sold

chrisdavis6

JW racing, Sent you a PM about the ASR swaybar. Im Interested.

ED9man

FS: 98+ spec ITR transmission with KAAZ 1.5 way LSD, ATS 4.929 final drive and 3.070 first gear, fresh syncros, bearings, and seals less than 4000 miles ago. Transmission was swapped into a YS1 cable case. Selling because my new motor dropped a valve and I'm out of money. This is the ultimate B series transmission adapted for your B series CRX or DA, no need to go through the hassle and unreliability of a hydro conversion. I also have a 7.5lb Fidanza racing flywheel, Exedy Stage 1 clutch, and B series CRX axles with a GS-R intermediate shaft available for sale with low miles. $1600 + shipping for trans make offer on other parts. Pics soon.

90blackcrx

Just the rears

Used the Pic Apex 10Kr for a 3 weeks and 1 track event(ITR Expo) on his DC2 gsr, so they are in very good condition. Also great on the track as well. My buddy won the PIC raffle during Expo, and he took advantage of that, so he got the upgrade to PIC selects

$315 shipped

Mike_C

Brand new in box Eibach ERS springs (6" 2.5"ID 700lbs). $100 shipped.
Faded black Benen tow hooks/beer holders. $50 shipped.
Sparco Evo (3/11 exp) in perfect condition: $450 picked up.
Custom built Sparco mount w/ slider: $200.
Fixed Sparco mount: $150.

KIWI

CRX Front Bumper- Molded Urethane- Needs Paint but is in good condition
$80.00



Ported GSR Head. SkunkII Springs & Retainers- $500.00 Comes with Free Pro Series Intake Manifold

Acura Integra '94-'00 DC2 Air Bags - Dash & Steering Wheel with Harness $45.00



Full set - Integra DC2 ABS Brake Sensor cables. $60.00




Phone: Kiwi 714 998 1258

GSRCRXsi

Ground Control top hats (pair)- $SOLD

Integra Type R front calipers and brackets- $125 shipped
calipers: 17CL15VN
brackets: 23T (milled ~2-3mm on mounting surface for fitment on hybrid brake setup!)
used these in conjunction with my stock knuckles and Integra/civic EX rotors for a nice little 10.3" brake setup.
i stepped up to wilwood 4-pots so i no longer need these
banjo bolt for brake lines and bleeder screws included (copper washers too but id replace those if i were you)
calipers are unmodified, but the brackets are as i pointed out above. i believe you can use this same setup on an integra or civic EX (which comes with 10.3" stock) in conjunction with a 11" rotor for an 11" setup. but dont take my word for it, do your own research.
pistons and seals are fine on the calipers, no tears, and piston moves smoothly
WILL split up the calipers and brackets if needed, but dont lowball.






Ground Control coilover sleeves CRX(no springs) - $35 shipped obo
everything pictured included
no springs included just the sleeves and perches with set screw
a little dirty
a little corrosion on the rears (threads are fine)
i would use the O-rings to size up new ones. they are dry rotted. easily had from any hardware store. pretty sure you need 8 of each total



91 CRX Si rear LCAs w/ ES bushings - $35 shipped for the pair obo
could use a good disassemble and re-grease, or a good candidate for new OEM/Mugen/Hardrace/spherical bushings
only selling because im replacing with alloy arms and spherical bushings.

db1love

iTrader: (1)

EK (but will work with others)

Shocks and coilovers are used (roughly 18k miles)

civic/integra/crx

Race valved and shortened - spss3

Hyper coil springs and sleeves
(2) 600lb
(2) 800lb
(2) helper springs


$1000 plus shipping

shocks are still on the car, car is sitting in my garage. (not my daily driver)


I also have an ASR subframe brace and ITR rear swaybar combo that I am willing to include for more money.




wick300@hotmail.com

ITRacer121

WTB : Silver Spring Perches from Koni Yellows (taking the coilovers off and going back to springs)

I like my R

iTrader: (2)

FS: Pair of Eibach ERS springs
1 pair 2.5 x 10 x 400
$50 shipped.

Simon Tibbett

Like new IO Port video camera mount. RARELY used and in GREAT condition. No issues. Located in GA I am asking $75.00 SHIPPED anywhere in the US. Comes with everything you need.