Custom ear molds available - any interest?
#1
Collector-o-Guns and Drinker
Thread Starter
Custom ear molds available - any interest?
A long while back I posted asking if folks would be interested in custom-fit ear molds, since Mrs. Splat was finishing her masters in audiology at the time. Well, skool's been done for a while, and Bef has also attained her hearing aid dealer's license for North Carolina, which means she can fit and sell custom ear molds.
So now if y'all are interested, she can sell you a pair of custom molds. The fitting process takes about ten or fifteen minutes, during which Bef will use a two-part silicone putty to take an impression of your ear. Those get sent off to be used to create the molds (plugs) themselves.
The plugs come in either flesh-tone (several shades available) or your choice of color, and are attached by a cord embedded in the molds.
Flesh tone molds would be $80 shipped, and color molds would be $5 extra.
Unfortunately, Bef's license is for North Carolina only, so she has to take the impressions somewhere in the state. If you're interested, just contact me through IM or my email on here.
Thanks
So now if y'all are interested, she can sell you a pair of custom molds. The fitting process takes about ten or fifteen minutes, during which Bef will use a two-part silicone putty to take an impression of your ear. Those get sent off to be used to create the molds (plugs) themselves.
The plugs come in either flesh-tone (several shades available) or your choice of color, and are attached by a cord embedded in the molds.
Flesh tone molds would be $80 shipped, and color molds would be $5 extra.
Unfortunately, Bef's license is for North Carolina only, so she has to take the impressions somewhere in the state. If you're interested, just contact me through IM or my email on here.
Thanks
#3
Collector-o-Guns and Drinker
Thread Starter
Mine seem to be a bit under foam plugs. I wouldn't shoot at an indoor range with them, but I would outside.
I wore them in Bbasso's ITR at Expo 5, and was very comfortable.
I wore them in Bbasso's ITR at Expo 5, and was very comfortable.
#4
Honda-Tech Member
Join Date: Nov 2000
Location: Charlotte
Posts: 11,967
Likes: 0
Received 0 Likes
on
0 Posts
Re: Custom ear molds available - any interest? (Splat)
Mine fit quite well and worked like a charm at the Ministry and Clutch concerts a while back.
I have not had them inside of a 'race' car on track... but think they would so just as well there.
I have not had them inside of a 'race' car on track... but think they would so just as well there.
#5
Honda-Tech Member
Join Date: Sep 2000
Location: Atlanta, GA, USA
Posts: 540
Likes: 0
Received 0 Likes
on
0 Posts
Re: Custom ear molds available - any interest? (Willard)
<sidenote>
If you think the Shure 5CE headphones are the snizzle, check out the Ultimate Ears UE series. http://www.ultimateears.com/cu....html $$$$$
I didn't realize custom fit ear pieces were as common, etc.
</sidenote>
If you think the Shure 5CE headphones are the snizzle, check out the Ultimate Ears UE series. http://www.ultimateears.com/cu....html $$$$$
I didn't realize custom fit ear pieces were as common, etc.
</sidenote>
#6
Collector-o-Guns and Drinker
Thread Starter
Bef's molds would be just ear plugs - I don't think the company she goes through can embed the electronics like that. Then again, they do provide hearing aid molds, so maybe they can. I'll have to talk to her about it.
Trending Topics
#8
Honda-Tech Member
Join Date: Jul 2001
Location: Snellville, Ga, USA
Posts: 1,156
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Splat)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Splat »</TD></TR><TR><TD CLASS="quote">Bef's molds would be just ear plugs - I don't think the company she goes through can embed the electronics like that. Then again, they do provide hearing aid molds, so maybe they can. I'll have to talk to her about it.</TD></TR></TABLE>
I am not sure that it would be worth her while to worry about doing this. With as many different plug types as are out there and the relative expense of the hardware, it would probably just be much easier for people to either go to their radio supplier or have the do it yourself kits sent in to have the electronics put it.
As for the original option, it sounds like a great idea and a necessary one. I got into using ear plugs probably about 5 or 6 years after I really should have, and already have noticably less hearing in my left ear than in my right.
I'm 28. Deafness is bad, and I hope I caught it in time to have stopped the damage.
I am not sure that it would be worth her while to worry about doing this. With as many different plug types as are out there and the relative expense of the hardware, it would probably just be much easier for people to either go to their radio supplier or have the do it yourself kits sent in to have the electronics put it.
As for the original option, it sounds like a great idea and a necessary one. I got into using ear plugs probably about 5 or 6 years after I really should have, and already have noticably less hearing in my left ear than in my right.
I'm 28. Deafness is bad, and I hope I caught it in time to have stopped the damage.
#9
Honda-Tech Member
Join Date: Dec 2001
Location: the rec center, usa
Posts: 866
Likes: 0
Received 0 Likes
on
0 Posts
Re: Custom ear molds available - any interest? (Splat)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Splat »</TD></TR><TR><TD CLASS="quote">
Unfortunately, Bef's license is for North Carolina only, so she has to take the impressions somewhere in the state. </TD></TR></TABLE>
so she cant do it at VIR but she could do it in Milton?
Y'all gonna be at the 13hr?
Unfortunately, Bef's license is for North Carolina only, so she has to take the impressions somewhere in the state. </TD></TR></TABLE>
so she cant do it at VIR but she could do it in Milton?
Y'all gonna be at the 13hr?
#10
Collector-o-Guns and Drinker
Thread Starter
Re: Custom ear molds available - any interest? (JoelG)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JoelG »</TD></TR><TR><TD CLASS="quote">so she cant do it at VIR but she could do it in Milton?</TD></TR></TABLE>
Correct. It's an insurance/license thing. She'd have to satisfy the requirements for state licensure in other locations, which basically means anything from a test, to a test plus x years of supervised practice depending on the state's requirements
When is the 13hr? We're about an hour and a half away from VIR, so we can definitely try to make arrangements if there's interest.
Correct. It's an insurance/license thing. She'd have to satisfy the requirements for state licensure in other locations, which basically means anything from a test, to a test plus x years of supervised practice depending on the state's requirements
When is the 13hr? We're about an hour and a half away from VIR, so we can definitely try to make arrangements if there's interest.
#12
Honda-Tech Member
Join Date: Dec 2001
Location: the rec center, usa
Posts: 866
Likes: 0
Received 0 Likes
on
0 Posts
Re: Custom ear molds available - any interest? (Splat)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Splat »</TD></TR><TR><TD CLASS="quote">When is the 13hr? We're about an hour and a half away from VIR, so we can definitely try to make arrangements if there's interest.</TD></TR></TABLE>
first weekend in Nov.
I will check to see if any of the other drivers on our team (2 cars, 6 drivers) are interested. if so it would be worthwhile.
first weekend in Nov.
I will check to see if any of the other drivers on our team (2 cars, 6 drivers) are interested. if so it would be worthwhile.
#13
Collector-o-Guns and Drinker
Thread Starter
Re: Custom ear molds available - any interest? (JoelG)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JoelG »</TD></TR><TR><TD CLASS="quote">
first weekend in Nov.
I will check to see if any of the other drivers on our team (2 cars, 6 drivers) are interested. if so it would be worthwhile.</TD></TR></TABLE>
Keep us posted, please
We unfortunately have a wedding down east on Saturday, but we might be able come up Friday or Sunday.
first weekend in Nov.
I will check to see if any of the other drivers on our team (2 cars, 6 drivers) are interested. if so it would be worthwhile.</TD></TR></TABLE>
Keep us posted, please
We unfortunately have a wedding down east on Saturday, but we might be able come up Friday or Sunday.
Thread
Thread Starter
Forum
Replies
Last Post
JapJunkies Krazy Blowout Garage Sell!!!!!! Bunch of Goodies-Always Updated*********************SO Ca
JapJunkie
For Sale
2534
04-10-2014 11:05 AM
stickercuttingcom
Miscellaneous - Appearance - Lighting
1
12-23-2005 03:20 PM
Splat
Road Racing / Autocross & Time Attack
13
03-02-2004 04:48 PM