***KiddRACING DOMINATOR 06-08 Civic SI Header***
#82
Re: ***KiddRACING DOMINATOR 06-08 Civic SI Header***
Hey I just bought these headers for my 09 si and I just have a few questions. Can I reuse my stock bolts or do I need to buy new ones? Some have said they reused the stock bolts but ppl on (8th) civic are saying they needed to buy new ones as well as a triangle gasket, will I need to purchase this as well? My last question is where does the donut gasket go??? Kinda a noob question I know lol but I'm pretty new to the car game, anyway my guess is it that it goes between the headers and testpipe, is this correct??
Last edited by 96civicnyc; 01-23-2010 at 06:01 AM.
#84
Thread Starter
Join Date: Oct 2003
Location: atlanta, ga, usa
Posts: 5,899
Likes: 0
Received 0 Likes
on
0 Posts
Re: ***KiddRACING DOMINATOR 06-08 Civic SI Header***
You can reuse then with washers or spacers or buy new hardware that works depends on what you want to do
donut gasket goes on the end of the header before test pipe
nothing else is needed
all the info was on 8thgencivic but I don't know if it's still there because they banned me
donut gasket goes on the end of the header before test pipe
nothing else is needed
all the info was on 8thgencivic but I don't know if it's still there because they banned me
#89
Re: ***KiddRACING DOMINATOR 06-08 Civic SI Header***
did the install yesterday and as others have said you do need new bolts to connect the headers to the test pipe because the stock spring bolts were too short, unless you compress the spring down with a clamp and then put the nut on maybe it will fit, and the bolts attaching the test pipe to the exhaust had to be replaced as will because they were a little too wide on the threading and all three would not fit into the holes on the exhaust side, only 2 would, I think this is because the test pipe triangle end is not the exact same size as the exhaust. But overall this install was decent and as of now I love the headers just need to break them in. So anyone who's doing this install buy new bolts first.
#100
Thread Starter
Join Date: Oct 2003
Location: atlanta, ga, usa
Posts: 5,899
Likes: 0
Received 0 Likes
on
0 Posts