Anyone use those cheap $100 or so kit available online to do home powder coating?
I'm not expecting 'superb' finish or anything but just want to powder coat some bicycle components. Just wondering if anyone recommends certain kit or brand...guess if the finish is good I wouldn't mind spending few hundred dollars for home use.
Hmm I might have to check that out. One thing I like about the WAI system is you don't need an air compressor. And I have access to small sandblaster...just need to grab a beatup oven but figured if I'm going to spend $60 for someone to powedercoat parts I might as well get a system for myself.
I have a system I bought from eastwoodco like 7-8 yrs ago. It was $150 and the results are perfect nearly everytime. I have 2 house ovens I bought cheap at a fleamarket that I use. As long as you prep good its going to come out nice.
My Rides: 09 Ford F350 QC, 2000 Civic Si, 1994 Integra GSR RHD Turbo,
1995 Mitsu Eclipse Widebody built 420a turbo
Vouches, Eyger, _Hans, negusjuda,
Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for Honda-Tech.com content, comments, or advertising. Honda-Tech.com is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Honda-Tech.com in any way.
Copyright/trademark/sales mark infringements are not intended or implied.