O16581724 5 2 5

I couldn't find much reading. My buddy was rushing me along to paint my car and my mixing cup had percentages i couldn't figure out instead of ratios (like fill the 8 column to 6, fill the 1 column to 6, fill the 2 column to 6, i understand that). He said "Here, go by this" and there were numbers up the cup going to 10 next to the ounces and said "Fill it to a number, then add 1 for the hardener, and 2 for the reducer". So i filled it to 6, added 1 (7) for hardener, and 2 (9) for reducer. Not realizing i did a 6:1:2 mix until i'd sprayed the car, it needed to be 8:1:2.

I discovered what was wrong on my final coat when i did 4 up 1 and up 2, i then realized how off it was.

Laid pretty smooth though, lol.


Modified by O16581724 5 2 5 at 7:31 PM 9/7/2008

wholios-EG

you should be ok the paint will dry faster but if you laid it on to thick it might start to crack but still need a pro to get it to this

O16581724 5 2 5

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by wholios-EG &raquo;</TD></TR><TR><TD CLASS="quote">you should be ok the paint will dry faster but if you laid it on to thick it might start to crack but still need a pro to get it to this </TD></TR></TABLE>

I did around 3 coats of urethane, should be a bit less resistant to cracking than enamel i hope. It was clear hardener, so it's actually taking forever to dry, might be a good thing though.

Snailor Built

tacky for a while was our experience with a similiar incident

O16581724 5 2 5

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 30lb_EM1 &raquo;</TD></TR><TR><TD CLASS="quote">tacky for a while was our experience with a similiar incident
</TD></TR></TABLE>

Having the same one, it was tacky for close to 3 days and it's still soft on that 3rd day.

Got a few spots i dinged putting it all together while soft, d'oh.

Snailor Built

***strangles bart***