Roommates 350Z
01-18-2012, 08:45 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Jan 2012
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Roommates 350Z
Well since i dont have a bad *** car show off i guess i can put a post of my roommates car since I've been there since he bought the car and helped him with the all the parts he's put into the car.
Here is some of the parts, i dont know all of them.
2003 Nissan 350z
1/2 motordyne spacer
powerlab turbo kit
GT35R 1.63 housing
tial wastegates and bov
1 step colder ngk irridiium XI plugs
up rev osiris tune by MAC Autosports Denver, CO
600cc injectors
walbro fuel pump
oilpan spacer
mishimoto thermostat
mishimoto fan shroud
mishimoto radiator
bc true coilovers
spc camber arms
spc A arms
19" volk gts wheels
Here is some of the parts, i dont know all of them.
2003 Nissan 350z
1/2 motordyne spacer
powerlab turbo kit
GT35R 1.63 housing
tial wastegates and bov
1 step colder ngk irridiium XI plugs
up rev osiris tune by MAC Autosports Denver, CO
600cc injectors
walbro fuel pump
oilpan spacer
mishimoto thermostat
mishimoto fan shroud
mishimoto radiator
bc true coilovers
spc camber arms
spc A arms
19" volk gts wheels
01-18-2012, 09:01 AM
#3
Honda-Tech Member
Thread Starter
Join Date: Jan 2012
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Re: Roommates 350Z
He made 383 whp at 102 degrees and 100% humidity at 5 psi at the elevation of 6300ft
He now runs at 3200ft with 8 psi in rapid city, south dakota so he should be over 400whp.
Future plans
he bought a built 9.1:1 compression long block and up graded fuel system from a guy on the form putting down around 600 whp.
He has a car show to get ready for in a month and is slowly buying new parts before he swaps the engine. Better clutch, tubular short headers, twin walbro 255's and 1000cc injectors for E85 and polishing and painting of some engine parts, also 4in turbo back instead of 3". We have to cut a bigger hole in his frame for the bigger exhaust first.
He's hoping for a conservative tune around 12-14 psi to get him around 550whp and a holy **** E85 tune getting close to 700whp.
He now runs at 3200ft with 8 psi in rapid city, south dakota so he should be over 400whp.
Future plans
he bought a built 9.1:1 compression long block and up graded fuel system from a guy on the form putting down around 600 whp.
He has a car show to get ready for in a month and is slowly buying new parts before he swaps the engine. Better clutch, tubular short headers, twin walbro 255's and 1000cc injectors for E85 and polishing and painting of some engine parts, also 4in turbo back instead of 3". We have to cut a bigger hole in his frame for the bigger exhaust first.
He's hoping for a conservative tune around 12-14 psi to get him around 550whp and a holy **** E85 tune getting close to 700whp.
Trending Topics
01-19-2012, 05:32 PM
#10
Re: Roommates 350Z
He made 383 whp at 102 degrees and 100% humidity at 5 psi at the elevation of 6300ft
He now runs at 3200ft with 8 psi in rapid city, south dakota so he should be over 400whp.
Future plans
he bought a built 9.1:1 compression long block and up graded fuel system from a guy on the form putting down around 600 whp.
He has a car show to get ready for in a month and is slowly buying new parts before he swaps the engine. Better clutch, tubular short headers, twin walbro 255's and 1000cc injectors for E85 and polishing and painting of some engine parts, also 4in turbo back instead of 3". We have to cut a bigger hole in his frame for the bigger exhaust first.
He's hoping for a conservative tune around 12-14 psi to get him around 550whp and a holy **** E85 tune getting close to 700whp.
He now runs at 3200ft with 8 psi in rapid city, south dakota so he should be over 400whp.
Future plans
he bought a built 9.1:1 compression long block and up graded fuel system from a guy on the form putting down around 600 whp.
He has a car show to get ready for in a month and is slowly buying new parts before he swaps the engine. Better clutch, tubular short headers, twin walbro 255's and 1000cc injectors for E85 and polishing and painting of some engine parts, also 4in turbo back instead of 3". We have to cut a bigger hole in his frame for the bigger exhaust first.
He's hoping for a conservative tune around 12-14 psi to get him around 550whp and a holy **** E85 tune getting close to 700whp.
01-20-2012, 09:53 PM
#13
Honda-Tech Member
Thread Starter
Join Date: Jan 2012
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Re: Roommates 350Z
the Temp on the dyno computer program was reading 102 degrees in the shop and 90 to 100% humidity in august 2011
He has sway bars, 1.5 LSD, Coilovers, and camber kits but as for brakes lol he really doesnt think he'll need them, I'm waiting for him to do another drifting event and brakes **** out.
The red bumber is the actual red from factory for 2003 z, the painter didn't blend the colors good. That just shows how much oem paint fades over 8 years haha.
He has sway bars, 1.5 LSD, Coilovers, and camber kits but as for brakes lol he really doesnt think he'll need them, I'm waiting for him to do another drifting event and brakes **** out.
The red bumber is the actual red from factory for 2003 z, the painter didn't blend the colors good. That just shows how much oem paint fades over 8 years haha.
Thread
Thread Starter
Forum
Replies
Last Post
ricecooker415
Northern California (Sales)
7
06-16-2009 11:33 AM
