FS/FT B16A2 swap w/lsd, ROM tuning setup
#26
Honda-Tech Member
Thread Starter
Join Date: Feb 2009
Location: Failingham
Posts: 309
Likes: 0
Received 0 Likes
on
0 Posts
Re: F/S: B16A Complete Engine Swap W/LSD header chipped ECU
Engine is coming out tomorrow. Movie clip available(can't attach here). PM me if interested.
#28
Honda-Tech Member
Thread Starter
Join Date: Feb 2009
Location: Failingham
Posts: 309
Likes: 0
Received 0 Likes
on
0 Posts
Re: F/S: B16A Complete Engine Swap W/LSD header chipped ECU
^^^These are the receipts I have of what was paid for everything that comes with the swap. The chipped ecu ended up costing that much for the ecu, chipping, and tuning time according to the bill.
If I was pricing everything at what was spent it would be $4600 for the swap and then I would be on crack.
I'm trying to get the point across that this whole swap was professionally put together and is in excellent shape. The original owner was one of these that didn't know which end of a screwdriver did the work but had $$$ and paid to have everything taken care of.
If I was pricing everything at what was spent it would be $4600 for the swap and then I would be on crack.
I'm trying to get the point across that this whole swap was professionally put together and is in excellent shape. The original owner was one of these that didn't know which end of a screwdriver did the work but had $$$ and paid to have everything taken care of.
#29
Honda-Tech Member
Thread Starter
Join Date: Feb 2009
Location: Failingham
Posts: 309
Likes: 0
Received 0 Likes
on
0 Posts
Re: F/S: B16A Complete Engine Swap W/LSD header chipped ECU
Edited, to the top...
Haven't had a single person come look at this yet....everyone must be saving their money so they can afford rat meat during the 2nd great depression...
Haven't had a single person come look at this yet....everyone must be saving their money so they can afford rat meat during the 2nd great depression...
#31
Honda-Tech Member
Thread Starter
Join Date: Feb 2009
Location: Failingham
Posts: 309
Likes: 0
Received 0 Likes
on
0 Posts
Re: F/S: B16A Complete Engine Swap W/LSD header chipped ECU
After cash for the most part but would consider a set of 15"-16" rims/tires for part trade...
#33
Honda-Tech Member
Thread Starter
Join Date: Feb 2009
Location: Failingham
Posts: 309
Likes: 0
Received 0 Likes
on
0 Posts
Re: F/S: B16A Complete Engine Swap W/LSD header chipped ECU
I don't want to part my swap sorry,
If you wanted the whole swap I would take the gsr trans in part trade provided we could have 20-20 here in B'ham pop it apart(he can do it in like 20 mins) and see how things are inside.
If you wanted the whole swap I would take the gsr trans in part trade provided we could have 20-20 here in B'ham pop it apart(he can do it in like 20 mins) and see how things are inside.
#35
Honda-Tech Member
Thread Starter
Join Date: Feb 2009
Location: Failingham
Posts: 309
Likes: 0
Received 0 Likes
on
0 Posts
Re: F/S: B16A Complete Engine Swap W/LSD header chipped ECU
^^PM me some pics and how much cash on top?
What color sa90's/offset/tire size and tread %?
What color sa90's/offset/tire size and tread %?
Last edited by rkcarguy; 03-09-2009 at 02:09 PM.
#36
Honda-Tech Member
Join Date: Dec 2004
Location: Seattle, WA
Posts: 117
Likes: 0
Received 0 Likes
on
0 Posts
Re: F/S: B16A Complete Engine Swap W/LSD header chipped ECU
15x7
38mm offset
Light Grey
(2)Falken Azenis
(2)Falken Ziex
Tires 90% tread if not better
Not sure how much cash. I'll work on pics. What mounts come with the motor?
38mm offset
Light Grey
(2)Falken Azenis
(2)Falken Ziex
Tires 90% tread if not better
Not sure how much cash. I'll work on pics. What mounts come with the motor?
#37
Honda-Tech Member
Thread Starter
Join Date: Feb 2009
Location: Failingham
Posts: 309
Likes: 0
Received 0 Likes
on
0 Posts
Re: F/S: B16A Complete Engine Swap W/LSD header chipped ECU
It comes with all 5 mounts in good shape. Both the lower front mounts that bolt under the frame rail have the energy suspension bushings and so does the rear mount. The upper tranny and timing cover mount are stock GSR parts. The swap came out of a EG hatch and should go right in if that's your current car in your avatar...
#39
Honda-Tech Member
Join Date: Dec 2004
Location: Seattle, WA
Posts: 117
Likes: 0
Received 0 Likes
on
0 Posts
Re: F/S: B16A Complete Engine Swap W/LSD header chipped ECU
here's the link to my wheels...
http://www.hondamarketplace.com/show....php?t=2478812
lmk if you're interested. give me an idea of how much cash to top off.
http://www.hondamarketplace.com/show....php?t=2478812
lmk if you're interested. give me an idea of how much cash to top off.
#40
Honda-Tech Member
Thread Starter
Join Date: Feb 2009
Location: Failingham
Posts: 309
Likes: 0
Received 0 Likes
on
0 Posts
Re: F/S: B16A Complete Engine Swap W/LSD header chipped ECU
to the top...
will go to toad if he gets cash in time....meanwhile still up for grabs.
Take 4x100 wheels/tires in part trade 15" and 16"....
Also willing to take LS/GSR tranny in part trade, provided I can have 20-20 in Bellingham pop it open to verify condition. Have truck and cherry picker can deliver....
Mainly trying to downsize a little so I don't have to move so much stuff, we're going to move closer to town soon.
ITR yellow EG HB roller to be listed soon.....
will go to toad if he gets cash in time....meanwhile still up for grabs.
Take 4x100 wheels/tires in part trade 15" and 16"....
Also willing to take LS/GSR tranny in part trade, provided I can have 20-20 in Bellingham pop it open to verify condition. Have truck and cherry picker can deliver....
Mainly trying to downsize a little so I don't have to move so much stuff, we're going to move closer to town soon.
ITR yellow EG HB roller to be listed soon.....
#41
Honda-Tech Member
Thread Starter
Join Date: Feb 2009
Location: Failingham
Posts: 309
Likes: 0
Received 0 Likes
on
0 Posts
Re: F/S: B16A Complete Engine Swap W/LSD header chipped ECU
To the top...
Still have the swap for sale.
Header has a 3" electric exhaust cutout nicely welded into the end of it.
Will include it with switch and wiring as well as drop price to $2500.
Subtract another $100 and I will include a stock B16A flywheel and keep the lightweight one...
Gearing up to tear down the 4dr for paint and need this out of my garage soon..
Still open for partial trades of 4x100 15" or 16" wheels/tires and or B-series GSR or LS transmission(s)...
Still have the swap for sale.
Header has a 3" electric exhaust cutout nicely welded into the end of it.
Will include it with switch and wiring as well as drop price to $2500.
Subtract another $100 and I will include a stock B16A flywheel and keep the lightweight one...
Gearing up to tear down the 4dr for paint and need this out of my garage soon..
Still open for partial trades of 4x100 15" or 16" wheels/tires and or B-series GSR or LS transmission(s)...
#43
Honda-Tech Member
Thread Starter
Join Date: Feb 2009
Location: Failingham
Posts: 309
Likes: 0
Received 0 Likes
on
0 Posts
Re: F/S: B16A Complete Engine Swap W/LSD header chipped ECU
^^^
So basically just the engine harness ecu?
No mounts, axles, shift linkage, radiator, hoses, intermediate shaft, throttle cable?
So basically just the engine harness ecu?
No mounts, axles, shift linkage, radiator, hoses, intermediate shaft, throttle cable?
#45
Honda-Tech Member
Thread Starter
Join Date: Feb 2009
Location: Failingham
Posts: 309
Likes: 0
Received 0 Likes
on
0 Posts
Re: F/S: B16A Complete Engine Swap W/LSD header chipped ECU
Lets do this...
-$100 for ecu
-$100 both axles
-$50 Intermediate shaft
-$100 Exchange light flywheel for stock
-$150 Motor mounts and rear bracket
-$50 Radiator and Hoses
-$100 Electric Exhaust Cutout
-$10 Throttle Cable
-$100 Header
=$1740 for complete engine transmission(lsd but with stock flywheel) and harness.
-$100 for ecu
-$100 both axles
-$50 Intermediate shaft
-$100 Exchange light flywheel for stock
-$150 Motor mounts and rear bracket
-$50 Radiator and Hoses
-$100 Electric Exhaust Cutout
-$10 Throttle Cable
-$100 Header
=$1740 for complete engine transmission(lsd but with stock flywheel) and harness.
#47
Honda-Tech Member
Thread Starter
Join Date: Feb 2009
Location: Failingham
Posts: 309
Likes: 0
Received 0 Likes
on
0 Posts
FS: ROM tuning setup-expand your horizons...
I am offering for sale a complete ROM tuning setup for NISSAN ecu's. I ended up acquiring this setup from EOPerformance in Monroe, WA when they closed up.
I am advertising on here because there is far more people who do the ROM tuning in the honda world and understand the "language". I purchased the setup hoping to learn how to use it and offer chipping tuning services, but with the house and new baby just don't have time. People are already e-mailing me wanting chips and tuning done, and I can't help them and feel like a moron hiding the cure for cancer under my bed.
Whats here:
HP laptop with MAD, Greddy, and basic Hexadecimal programs. Works great and battery is in good shape 1HR+ unplugged run time.
Map files of every chip EOP ever burned with turbo, injector size, for auto-x, drag race, valet mode etc, for most any nissan RB's, SR's, VG's, KA-T's, CA's, and more. There is also the capability to read chips and upload their MAPs for modification. Several of the "Mine's" maps are also saved. Many of these maps have been dyno perfected and have made over 500whp on several different setups.
Chip burner and cord. Does single, dual, and triple map chips.
80+ labeled and burned chips(backups I believe) for maps listed above, + more blanks.
2ea Daughter boards and about 20ea of the sockets required to install them into the ECU's.
UV eraser "box", most of these chips are UV erasable and can be re-burned.
Laptop carry case and charge cord
Plastic parts bin with more chips 256kb-1mb.
The only thing that is missing compared to a honda rom setup is an emulator, this is a burn chip-install-test drive type setup, however there are so many maps it's just a matter of trying a few chips and copying the right one for the customer.
I also have a RB20DET ECU that has been chipped and tuned by EOP which the buyer may open and look at/photo so it can be understood what has to be added, however this ECU is not included with the package.
Expand your tuning service and make more $$$,
$700 takes the whole package.
Located in Bellingham, WA
Myself and many other Nissan people would prefer this to stay local. Partial trades considered for good LS tranny(will open to verify condition), and/or D-series LSD like OBX or similar.
Pics to come for those interested.
I am advertising on here because there is far more people who do the ROM tuning in the honda world and understand the "language". I purchased the setup hoping to learn how to use it and offer chipping tuning services, but with the house and new baby just don't have time. People are already e-mailing me wanting chips and tuning done, and I can't help them and feel like a moron hiding the cure for cancer under my bed.
Whats here:
HP laptop with MAD, Greddy, and basic Hexadecimal programs. Works great and battery is in good shape 1HR+ unplugged run time.
Map files of every chip EOP ever burned with turbo, injector size, for auto-x, drag race, valet mode etc, for most any nissan RB's, SR's, VG's, KA-T's, CA's, and more. There is also the capability to read chips and upload their MAPs for modification. Several of the "Mine's" maps are also saved. Many of these maps have been dyno perfected and have made over 500whp on several different setups.
Chip burner and cord. Does single, dual, and triple map chips.
80+ labeled and burned chips(backups I believe) for maps listed above, + more blanks.
2ea Daughter boards and about 20ea of the sockets required to install them into the ECU's.
UV eraser "box", most of these chips are UV erasable and can be re-burned.
Laptop carry case and charge cord
Plastic parts bin with more chips 256kb-1mb.
The only thing that is missing compared to a honda rom setup is an emulator, this is a burn chip-install-test drive type setup, however there are so many maps it's just a matter of trying a few chips and copying the right one for the customer.
I also have a RB20DET ECU that has been chipped and tuned by EOP which the buyer may open and look at/photo so it can be understood what has to be added, however this ECU is not included with the package.
Expand your tuning service and make more $$$,
$700 takes the whole package.
Located in Bellingham, WA
Myself and many other Nissan people would prefer this to stay local. Partial trades considered for good LS tranny(will open to verify condition), and/or D-series LSD like OBX or similar.
Pics to come for those interested.
Last edited by rkcarguy; 04-17-2009 at 06:58 PM.
#50
Honda-Tech Member
Thread Starter
Join Date: Feb 2009
Location: Failingham
Posts: 309
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS/FT B16A2 swap w/lsd, ROM tuning setup
Bump again.
Basically just selling this because I have a bit of a commute and went B20 w/LS tranny for MPG, nothing wrong with the B16A or tranny, but they kinda belong together for the revs/gear ratio match.
I'd be willing to take a good LS swap, LS or GSR tranny, or other offers trades maybe wheels and tires hit me up.
Basically just selling this because I have a bit of a commute and went B20 w/LS tranny for MPG, nothing wrong with the B16A or tranny, but they kinda belong together for the revs/gear ratio match.
I'd be willing to take a good LS swap, LS or GSR tranny, or other offers trades maybe wheels and tires hit me up.
Last edited by rkcarguy; 04-21-2009 at 07:20 PM.