Hondata S300 P28,750cc injectors,Fully Built D16a6 Turbo Motor,For Single Motor GT2871R Turbokit,Boo
11-30-2006, 03:34 PM
#1
Member
Thread Starter
Join Date: Mar 2006
Posts: 1,174
Likes: 0
Received 0 Likes
on
0 Posts
Hondata S300 P28,750cc injectors,Fully Built D16a6 Turbo Motor,For Single Motor GT2871R Turbokit,Boo
Everything is located in Northen California. Thanks for looking and please bump =]
Turbo,Motor,Tranny all have 4000+ Miles on it. Motor and turbokit is in perfect condition.
I'd take paypal or cash =]
all resonable offer will not be refuse.
FullyBuilt D16A6 Longblock 1700obo
Engine 2500 obo with tranny , i will throw in the clutches and jun flywheel also , I can shipped the motor but i perfer pickup!
Fully build D16a6
· Fully knife edged crank
· Eagle rods
· Arias 9:1 pistons
· Fully race ported head
· Isky 1mm over valves, Isky Springs, Isky Retainers
· Delta Cam
· Bluprinted and balanced
· Stocksleeve
· Canton 5.5qrt oil pan
· MSD Coil
· D16Y8 distributor
· NGK Wires
· AEM Fuel Rail
· AEM Fuel Filter
· AEM Fuel Pressure Regulator.
· NEW ARP head studs
· NEW Aluminum racing radiator
. NEW Setrab oil cooler and filter relocation kit
D16A6 Drive Train (Tranny):
· Blueprinted and rebuilt D16 SI transmission. New
Bearings, New Syncros
· QUAIFE LSD
· JUN Chromolly 9lbs flywheel
· ACT Race clutch
For Dseries Turbokits 1500 OBO shipped!
· Edelbrock intake manifold
· Prelude 60mm throttle body
· GT2871R turbo
· Love Fab Mini me EQ manifold
· Precision intercooler
· Custom aluminum intercooler piping
· Tial Billet 38mm Wastegate
· Tial Billet 55mm BOV
· Stock 11-12 PSI Spring
· Love Fab down pipe and wastegate pipe, divorced
· Customer 3” stainless exhaust with Magnaflow muffler
and side out.
GReddy PRofec B-Spec II 260obo shipped
Greddy TurboTimer 85 shipped
RC 750cc saturated injectors 270oboshipped
Hondata S300 with P28 700obo shipped
1991 SI Clean Title CRX Rolling Shell With Goodies 3200obo
I want to sell the shell complete as is until further notice.
This Shell is FREAKING CLEAN! perfect condition , absoultely flawess!
This shell is ready for the track,drag and a daily driven.
Its HARD to find a shell as clean and well taken care as this one.
Please serious buyer and offer only.!
Suspension.
· Fast Brakes 11” front brakes with Integra Calipers.
· Steel braided brake lines.
· Advance Design billed coilovers front. Double
adjustable. #450 Eibach ERS Springs
· Custom valved Koni yellows rear. #600 Eibach ERS
Springs
· Energy suspension bushings throughout
· SPC Billet Toe arms
· SPHERICAL BEARING TRAILING ARM BUSHINGS.
· Ground Control billet upper shock mounts front and
rear.
· Kosei K1 wheels with Kumho V700 Race Tires
· Adjustable rear upper control arms.
· New wheel bearings up front.
· New ball joints
· Place Racing Crossmember
· The exhust is all custom. Its 3" stainless with two
stainless steel
Magnaflow round mufflers
Chassis/Interiors:
· Kirk roll cage. Customized with new door bars. This
was a bolt in cage, but its been professionally TIG
welded together.
· Window Net
· Momo Seats
· Crow 5pt harness
· Aluminum battery box, Odyssey battery
· Full gauge package
· Custom aluminum door panels and sunroof plug
. Momo Monte Carlo
. Billet NRG quick disconnect
. Autometer oil pressure gauge
. Autometer voltage gague
. VDO oil temp gague
. VDO water temp gague
. Monster tac shiftlight
Modified by (x_x)o-('.'o) at 2:45 PM 12/1/2006
Modified by (x_x)o-('.'o) at 3:41 PM 12/7/2006
Turbo,Motor,Tranny all have 4000+ Miles on it. Motor and turbokit is in perfect condition.
I'd take paypal or cash =]
all resonable offer will not be refuse.
FullyBuilt D16A6 Longblock 1700obo
Engine 2500 obo with tranny , i will throw in the clutches and jun flywheel also , I can shipped the motor but i perfer pickup!
Fully build D16a6
· Fully knife edged crank
· Eagle rods
· Arias 9:1 pistons
· Fully race ported head
· Isky 1mm over valves, Isky Springs, Isky Retainers
· Delta Cam
· Bluprinted and balanced
· Stocksleeve
· Canton 5.5qrt oil pan
· MSD Coil
· D16Y8 distributor
· NGK Wires
· AEM Fuel Rail
· AEM Fuel Filter
· AEM Fuel Pressure Regulator.
· NEW ARP head studs
· NEW Aluminum racing radiator
. NEW Setrab oil cooler and filter relocation kit
D16A6 Drive Train (Tranny):
· Blueprinted and rebuilt D16 SI transmission. New
Bearings, New Syncros
· QUAIFE LSD
· JUN Chromolly 9lbs flywheel
· ACT Race clutch
For Dseries Turbokits 1500 OBO shipped!
· Edelbrock intake manifold
· Prelude 60mm throttle body
· GT2871R turbo
· Love Fab Mini me EQ manifold
· Precision intercooler
· Custom aluminum intercooler piping
· Tial Billet 38mm Wastegate
· Tial Billet 55mm BOV
· Stock 11-12 PSI Spring
· Love Fab down pipe and wastegate pipe, divorced
· Customer 3” stainless exhaust with Magnaflow muffler
and side out.
GReddy PRofec B-Spec II 260obo shipped
Greddy TurboTimer 85 shipped
RC 750cc saturated injectors 270oboshipped
Hondata S300 with P28 700obo shipped
1991 SI Clean Title CRX Rolling Shell With Goodies 3200obo
I want to sell the shell complete as is until further notice.
This Shell is FREAKING CLEAN! perfect condition , absoultely flawess!
This shell is ready for the track,drag and a daily driven.
Its HARD to find a shell as clean and well taken care as this one.
Please serious buyer and offer only.!
Suspension.
· Fast Brakes 11” front brakes with Integra Calipers.
· Steel braided brake lines.
· Advance Design billed coilovers front. Double
adjustable. #450 Eibach ERS Springs
· Custom valved Koni yellows rear. #600 Eibach ERS
Springs
· Energy suspension bushings throughout
· SPC Billet Toe arms
· SPHERICAL BEARING TRAILING ARM BUSHINGS.
· Ground Control billet upper shock mounts front and
rear.
· Kosei K1 wheels with Kumho V700 Race Tires
· Adjustable rear upper control arms.
· New wheel bearings up front.
· New ball joints
· Place Racing Crossmember
· The exhust is all custom. Its 3" stainless with two
stainless steel
Magnaflow round mufflers
Chassis/Interiors:
· Kirk roll cage. Customized with new door bars. This
was a bolt in cage, but its been professionally TIG
welded together.
· Window Net
· Momo Seats
· Crow 5pt harness
· Aluminum battery box, Odyssey battery
· Full gauge package
· Custom aluminum door panels and sunroof plug
. Momo Monte Carlo
. Billet NRG quick disconnect
. Autometer oil pressure gauge
. Autometer voltage gague
. VDO oil temp gague
. VDO water temp gague
. Monster tac shiftlight
Modified by (x_x)o-('.'o) at 2:45 PM 12/1/2006
Modified by (x_x)o-('.'o) at 3:41 PM 12/7/2006
Trending Topics
12-04-2006, 02:25 AM
#20
Honda-Tech Member
Join Date: Apr 2005
Location: madera, ca, usa
Posts: 270
Likes: 0
Received 0 Likes
on
0 Posts
you interested in a 205whp semi built itr swap for trade?
motor is currently in my ed hatch
do you have pics of motor+set up and dyno numbers ??
also why for sale ?
motor is currently in my ed hatch
do you have pics of motor+set up and dyno numbers ??
also why for sale ?
12-04-2006, 03:03 AM
#21
Member
Thread Starter
Join Date: Mar 2006
Posts: 1,174
Likes: 0
Received 0 Likes
on
0 Posts
Selling becuase i'm going back to school and i dont need these stuff , my family is moivng also so yea. I can ask for the dyno sheets. UMM kind of looking for cash >.< so i can buy myself a bone stock car to drive around , getting out of the scene and going back to shcool. Nothing is wrong with it.