FT: 1996 GSR with JDM front end
#1
Honda-Tech Member
Thread Starter
Join Date: Jan 2006
Location: So Cal
Posts: 4,276
Likes: 0
Received 0 Likes
on
0 Posts
FT: 1996 GSR with JDM front end
<FONT SIZE="7"> Car is sold!!!! </FONT>
Hey, what I have up to trade/sale is a 1996 GSR with a JDM front end. I seriously don't want to do this because it's my first car that I have put alot of money into it.
Here is the info and mod list on the car:
1996 Acura Integra GSR
100k original miles
Clean title (Will provide VIN if serious)
Has PW and AC
Car is reg. till 2008
Clifford 2 way alarm with remote start
Exterior
- JDM front end with HID
- JDM tail lights
- Type R red paint with painted bay and jams
- Type R front, side and rear lip
- Seibon CF hood (been on for 2 months now)
Interior
- Type R USDM rear and front seats (Both are in perfect condition, 9 out of 10)
- Type R shift ****
- Type R shift boot
- Type R USDM Cluster (cluster miles matches the car miles)
- CF vents, climate control and etc.
- Wide rear view mirrors
- Blox short shifter
Engine
- Stock b18c1 GSR motor
- Brand new Stage 1 clutch (700 miles on the clutch with a resurfaced flywheel)
- BLOX Intake Manifold
- JDM Type R red valve cover with CF wire cover
- Type R full cat back
- JDMCARBOY shift link
Suspension
- USDM 5 lug rims in Gun Metal (Brand new tires with lifetime warranty at American Tires)
- Type R 5 lug conversion (5x114.3)
- Ground Control coilovers
- PasswordJDM 2pt rear strut
- Type R front strut
The bad
- The lip was curb marks on both sides but could easily repainted
- Car needs an alignment because I hit a curb when I got cut off by some lady
- The front right (passenger side) rim had a really bad curb mark
- Trunk is gutted (Don't know if that is bad)
- Got hit on the 1/4 panel due to buyer. Someone was test driving my car and he got backed up into, so there is a damaged 1/4 panel.
That's basically the bad stuff about the car. The car is in great shape other than the bad stuff as I mentioned.
Please show me what you got or what you have in mind. Don't be scarred to email or pm. The worse thing that could happen is just me saying "No" to you. And don't worry about offending me, but then again please give me a realistic trade + cash.
If you have any question or want to see anything else, just contact me with the following provided below.
Contact info:
Richard Nguyen
aim - vi3t raca jdmdc2
email - x_vi3t_wrxsti_x@yahoo.com
I can provide more pictures of it if you like. Bump if you view please!
Modified by NguyenDC2 at 10:19 PM 2/24/2008
Modified by NguyenDC2 at 1:30 AM 2/25/2008
Modified by NguyenDC2 at 10:58 PM 3/1/2008
Hey, what I have up to trade/sale is a 1996 GSR with a JDM front end. I seriously don't want to do this because it's my first car that I have put alot of money into it.
Here is the info and mod list on the car:
1996 Acura Integra GSR
100k original miles
Clean title (Will provide VIN if serious)
Has PW and AC
Car is reg. till 2008
Clifford 2 way alarm with remote start
Exterior
- JDM front end with HID
- JDM tail lights
- Type R red paint with painted bay and jams
- Type R front, side and rear lip
- Seibon CF hood (been on for 2 months now)
Interior
- Type R USDM rear and front seats (Both are in perfect condition, 9 out of 10)
- Type R shift ****
- Type R shift boot
- Type R USDM Cluster (cluster miles matches the car miles)
- CF vents, climate control and etc.
- Wide rear view mirrors
- Blox short shifter
Engine
- Stock b18c1 GSR motor
- Brand new Stage 1 clutch (700 miles on the clutch with a resurfaced flywheel)
- BLOX Intake Manifold
- JDM Type R red valve cover with CF wire cover
- Type R full cat back
- JDMCARBOY shift link
Suspension
- USDM 5 lug rims in Gun Metal (Brand new tires with lifetime warranty at American Tires)
- Type R 5 lug conversion (5x114.3)
- Ground Control coilovers
- PasswordJDM 2pt rear strut
- Type R front strut
The bad
- The lip was curb marks on both sides but could easily repainted
- Car needs an alignment because I hit a curb when I got cut off by some lady
- The front right (passenger side) rim had a really bad curb mark
- Trunk is gutted (Don't know if that is bad)
- Got hit on the 1/4 panel due to buyer. Someone was test driving my car and he got backed up into, so there is a damaged 1/4 panel.
That's basically the bad stuff about the car. The car is in great shape other than the bad stuff as I mentioned.
Please show me what you got or what you have in mind. Don't be scarred to email or pm. The worse thing that could happen is just me saying "No" to you. And don't worry about offending me, but then again please give me a realistic trade + cash.
If you have any question or want to see anything else, just contact me with the following provided below.
Contact info:
Richard Nguyen
aim - vi3t raca jdmdc2
email - x_vi3t_wrxsti_x@yahoo.com
I can provide more pictures of it if you like. Bump if you view please!
Modified by NguyenDC2 at 10:19 PM 2/24/2008
Modified by NguyenDC2 at 1:30 AM 2/25/2008
Modified by NguyenDC2 at 10:58 PM 3/1/2008
#3
Honda-Tech Member
Thread Starter
Join Date: Jan 2006
Location: So Cal
Posts: 4,276
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Hmongslik)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Hmongslik »</TD></TR><TR><TD CLASS="quote">bump 4 a clean ride</TD></TR></TABLE>
#5
Honda-Tech Member
Thread Starter
Join Date: Jan 2006
Location: So Cal
Posts: 4,276
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Locc)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Locc »</TD></TR><TR><TD CLASS="quote">bump sell me the spoon cf replica lippp</TD></TR></TABLE>
Pmed
Pmed
#7
Honda-Tech Member
Thread Starter
Join Date: Jan 2006
Location: So Cal
Posts: 4,276
Likes: 0
Received 0 Likes
on
0 Posts
Re: (KID_DEATH)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by KID_DEATH »</TD></TR><TR><TD CLASS="quote">sell it!!!!
free bump for viewing </TD></TR></TABLE>
No car to get around with.
free bump for viewing </TD></TR></TABLE>
No car to get around with.
Trending Topics
#9
Honda-Tech Member
Thread Starter
Join Date: Jan 2006
Location: So Cal
Posts: 4,276
Likes: 0
Received 0 Likes
on
0 Posts
Re: FT: 1996 GSR with JDM front end (kgoner45)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by kgoner45 »</TD></TR><TR><TD CLASS="quote"> </TD></TR></TABLE>
to you for trying to help me out =]
to you for trying to help me out =]
#11
Honda-Tech Member
Thread Starter
Join Date: Jan 2006
Location: So Cal
Posts: 4,276
Likes: 0
Received 0 Likes
on
0 Posts
Re: FT: 1996 GSR with JDM front end (408wdy)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 408wdy »</TD></TR><TR><TD CLASS="quote">bump</TD></TR></TABLE>
Thanks woody
Thanks woody
#14
Honda-Tech Member
Thread Starter
Join Date: Jan 2006
Location: So Cal
Posts: 4,276
Likes: 0
Received 0 Likes
on
0 Posts
Re: (1EK1EG)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 1EK1EG »</TD></TR><TR><TD CLASS="quote">Bump for you...as much as Im sure you dont want to do it,you are doing a very noble thing.Good luck on the trade. </TD></TR></TABLE>
Thanks man, I'm glad someone understands. Most people would have "stories" and it won't even be true. But it's all real here. Being a son, I can't sit here and watch my mom lose money at the casino and not do anything about it.
Thanks man, I'm glad someone understands. Most people would have "stories" and it won't even be true. But it's all real here. Being a son, I can't sit here and watch my mom lose money at the casino and not do anything about it.
#18
Honda-Tech Member
Thread Starter
Join Date: Jan 2006
Location: So Cal
Posts: 4,276
Likes: 0
Received 0 Likes
on
0 Posts
Re: (astroxtc)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by astroxtc »</TD></TR><TR><TD CLASS="quote"> </TD></TR></TABLE>
I know Mike.... it sucks. Want to trade though? =]
I know Mike.... it sucks. Want to trade though? =]
#19
Honda-Tech Member
Join Date: Feb 2005
Location: 408, SANHEZZY, usa
Posts: 3,292
Likes: 0
Received 0 Likes
on
0 Posts
Re: (NguyenDC2)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by NguyenDC2 »</TD></TR><TR><TD CLASS="quote">
I know Mike.... it sucks. Want to trade though? =]</TD></TR></TABLE>
sure, i got 3 bucks and my wallet
I know Mike.... it sucks. Want to trade though? =]</TD></TR></TABLE>
sure, i got 3 bucks and my wallet
#21
Honda-Tech Member
Thread Starter
Join Date: Jan 2006
Location: So Cal
Posts: 4,276
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Superdragr45)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Superdragr45 »</TD></TR><TR><TD CLASS="quote">PMed...........</TD></TR></TABLE>
Back at you.
Back at you.
#23
Honda-Tech Member
Thread Starter
Join Date: Jan 2006
Location: So Cal
Posts: 4,276
Likes: 0
Received 0 Likes
on
0 Posts
Re: (LSeeper)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by LSeeper »</TD></TR><TR><TD CLASS="quote">i got a 96 V6 Camry commuter you wanna trade?? haha
clean car though, i used to have a Milano Red DC2 too</TD></TR></TABLE>
Sick, someone help me get money!
clean car though, i used to have a Milano Red DC2 too</TD></TR></TABLE>
Sick, someone help me get money!