FS : ITR Cams, Buddy Club Spec 3+ Cams, Exedy Twin Disc, Fully Built GSR Shortblock
#1
Honda-Tech Member
Thread Starter
Join Date: Nov 2006
Location: Central Jersey
Posts: 367
Likes: 0
Received 0 Likes
on
0 Posts
FS : Exedy Twin Disc, Fully Built GSR Shortblock, and more
I have a couple parts laying around just taking up space and figured I'd throw them up here. I am in no rush to sell these parts so if this post is still here they're still for sale. I am located in Central Jersey. Prices do not include shipping or PayPal fees.
B Series Exedy Twin Disc
Bought this clutch 2 years ago because my Stage 4 Competition took a dump at the track. Put it on and since then I haven't been back to the track with the car.
Looking to get $800 or best offer.
85.5 RS Machines Sleeved GSR Shortblock
This shortblock was built by Fischer Machine Shop in Edison, NJ. It has RS Machine sleeves currently at 85.5mm. Pistons are Wiseco 594M855 13+ compression on Eagle Rods with an LS crank. This motor made 260hp and then was retuned to be more conservative at 240hp. Made a couple passes at the track with this motor and then blew a headgasket. Took it apart and never got around to putting a new one on.
Not 100% sure I want to sell it but I'll put it up for $1800 or best offer.
If anyone has any questions send me a message.
B Series Exedy Twin Disc
Bought this clutch 2 years ago because my Stage 4 Competition took a dump at the track. Put it on and since then I haven't been back to the track with the car.
Looking to get $800 or best offer.
85.5 RS Machines Sleeved GSR Shortblock
This shortblock was built by Fischer Machine Shop in Edison, NJ. It has RS Machine sleeves currently at 85.5mm. Pistons are Wiseco 594M855 13+ compression on Eagle Rods with an LS crank. This motor made 260hp and then was retuned to be more conservative at 240hp. Made a couple passes at the track with this motor and then blew a headgasket. Took it apart and never got around to putting a new one on.
Not 100% sure I want to sell it but I'll put it up for $1800 or best offer.
If anyone has any questions send me a message.
Last edited by bunnyzor; 07-19-2015 at 06:34 PM. Reason: added more
Trending Topics
#12
Re: FS : ITR Cams, Buddy Club Spec 3+ Cams, Exedy Twin Disc, Fully Built GSR Shortblo
Do u have the pair of itr cams saw u had two intake cams not sure if it was a typo thxs.
#16
Honda-Tech Member
Thread Starter
Join Date: Nov 2006
Location: Central Jersey
Posts: 367
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS : ITR Cams, Buddy Club Spec 3+ Cams, Exedy Twin Disc, Fully Built GSR Shortblo
Eg.ls.turbo - I only have the intake cams.
JdmTosca - Only intake cams.
project 2two9 - PM me an offer for the bare block.
Muckman - The CC stage 4 was daily/streetable although a little rough if you get stuck in traffic. The Exedy grabbed a lot harder but if you slip/ride the clutch out it's not too bad. Only thing I didn't like was that it sounds like it was rattling at idle when the clutch isn't depressed.
JdmTosca - Only intake cams.
project 2two9 - PM me an offer for the bare block.
Muckman - The CC stage 4 was daily/streetable although a little rough if you get stuck in traffic. The Exedy grabbed a lot harder but if you slip/ride the clutch out it's not too bad. Only thing I didn't like was that it sounds like it was rattling at idle when the clutch isn't depressed.
#23
Honda-Tech Member
Thread Starter
Join Date: Nov 2006
Location: Central Jersey
Posts: 367
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS : ITR Cams, Buddy Club Spec 3+ Cams, Exedy Twin Disc, Fully Built GSR Shortblo
Yes the GSR short block has not been taken apart. Member who I bought it off of had a GSR Integra and put a JDM swap in it.