Em2 or ep3 (or rsx) 5 lug conversion NJ
12-27-2009, 03:42 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Dec 2006
Location: Barnegat, NJ, United States
Posts: 220
Likes: 0
Received 0 Likes
on
0 Posts
Em2 or ep3 (or rsx) 5 lug conversion NJ
Up for sale is a full 5 lug conversion from an 03 rsx type s. The car had 74xxx miles on it when removed. All parts are in good working order. It will include everything listed below
Front rsx knuckles with EP3 FRONT HUBS (oem from honda) already pressed in so you wont need to get different axles to do the swap either onto an ep3 or em2
Front brake calipers w/ good pads
Front brake rotors (they have slight rust on them from sitting but I will resurface them before the sale at no extra cost)
Front rubber brake lines
Front abs sensors (oem civic em2)
Front Lower control arms bushings are not torn
Rear trailing arms bushings are all good (also has lower control arms on it)
Rear Rotors (also have slight rust but I will resurface before sale)
Rear calipers w/ good pads
Rear upper control arms
Rear abs sensors
Emergency Brake Cables
I can get pictures if anyone is interested shoot me a pm. I would like to sell this right away. Pick up is prefered as these will be very expensive to ship.
I am in the New jersey Shore area.
I am looking to get $450.00 obo (please make offers if you are interested)
__________________
Front rsx knuckles with EP3 FRONT HUBS (oem from honda) already pressed in so you wont need to get different axles to do the swap either onto an ep3 or em2
Front brake calipers w/ good pads
Front brake rotors (they have slight rust on them from sitting but I will resurface them before the sale at no extra cost)
Front rubber brake lines
Front abs sensors (oem civic em2)
Front Lower control arms bushings are not torn
Rear trailing arms bushings are all good (also has lower control arms on it)
Rear Rotors (also have slight rust but I will resurface before sale)
Rear calipers w/ good pads
Rear upper control arms
Rear abs sensors
Emergency Brake Cables
I can get pictures if anyone is interested shoot me a pm. I would like to sell this right away. Pick up is prefered as these will be very expensive to ship.
I am in the New jersey Shore area.
I am looking to get $450.00 obo (please make offers if you are interested)
__________________
01-17-2010, 09:46 AM
#4
Honda-Tech Member
Thread Starter
Join Date: Dec 2006
Location: Barnegat, NJ, United States
Posts: 220
Likes: 0
Received 0 Likes
on
0 Posts
Re: Em2 or ep3 (or rsx) 5 lug conversion NJ
I am very sorry for the late response I havent check this post in a bit. Yes it will bolt on directly to an em2/es1 or ep3 also base rsx to upgrade to the type s size brakes. All the parts needed are there as you can see in the post. What model are you planning to put them on? Let me know if your interested in them.
thanks,
Steve
thanks,
Steve
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
ADVAN JDM
For Sale
2
06-28-2004 09:07 PM
