2000 SI PART OUT and 96 spec ITR 4x114.4 conversion. NEPA
#1
Honda-Tech Member
Thread Starter
2000 SI PART OUT and 96 spec ITR 4x114.4 conversion, B16 head and more. NEPA
Recently crashed my FBP 2000 Civic SI i am parting out the whole thing.Car has front end damage so NO LIP. There are lots of other random items from my Ek hatch as well. Most of the good items are already gone. I am located in allentown, PA. Prefer local pick-up. I have paypal and a bunch of vouchs so id be willing to ship smaller items.
Still have more to add
Email me at cbk0485@tmail.com to instantly get ahold of me.
Ls Vtec swap for 96-00 civic $2000
B16A2 Head,B18B1 Block with a polished S4C trans mission
comes with ITR Valve cover. Inside is all stock other than ARP headstubs and cosmetic stock size headgasket.
Timing Belt, water pump, oil pump and tensioner. Mfactory sandwich plate.
comes with
Axles, shift linkages, throttle cable, vibration mounts, rear&side trans bracket, P2T ecu, rad hoses, and oem header,
motor runs very strong only was only put together about 5k ago. EMAIL ME with any questions.
JHPUSA Exculsive Black Hasport mounts 96-00 civic. Rear trans mount and side trans mount $110 apiece.
Complete Mugen Twin Loop Exhaust.EK9. $750 More Pics Coming Soon.
2000 Passenger Headlight $30
96-98 OEM headlights like new. Housing blacked out. $75
2000 SI Rear Seats 2 small cig burns in cushion. Uppers are mint. $80
Tanabe axle back exhaust. Small hole in axle section. $30
2000 Civic Si OEM B-pipe. $65
Armrest $40
CTR Shift Boot $25
SOLD TO Mikeycivic
FBP Power Mirrors $45 for pair has scratches on inside near window from someone trying to break in easy fix with touch paint.
FBP surrounding has small crack in it mesh is mint. $35
SOLD TO Seek167
Matrix racing front strut bar $10
Door tweeters $45
00 si Prop valve will remove remaining line. $40
B16 Ac Compressor $30
B16 power steering pump with brackets $40
2000 SI rear t bracket $45
Power door panels with switches. Driver side Panels is gone i have all switchs for both side still PM me with needs.
B16A2 Pistons and Rods $60.
2000 B16A Starter OEM. $45
2000 B16A Half Shaft $75
2000 B16A IACV $25
2000 B16A Alt. $60
B16A Ac Bracket $35
2000 Civic SI Pass. Side Vibration Mount $20
96-00 Civic Dash Harness For using integra gauge cluster. Works Perfect. Missing radio plug $30
Greddy Radiator Cap. $10
96-00 Civic HB DX Wing VSM Mint. $50
2000 Civic Si Cat Converter. No O2 Sensor. $80
JDM EK9 Civic Type R Cluster. Dont wanna sell, but i will for $350 no less. If you can get it for less than go ahead.
SOLD
96 spec ITR wheels and suspension SOLD
2000 SI Fuel Line $15
2000 SI throttle cable $15
Suspension technique rear sway bar for 92-00 civics without swaybar.needs paint. $45
<U>Have lots of other random stuff so EMAIL me with needs. Check Back will be adding more in the next couple of weeks.
Will trade for JDM EK stuff, full coilovers for ek, k series all motor/swap stuff. Ill throw cash on top if need be.</U>[/B]
Modified by cbk0485 at 10:59 AM 11/16/2008
Still have more to add
Email me at cbk0485@tmail.com to instantly get ahold of me.
Ls Vtec swap for 96-00 civic $2000
B16A2 Head,B18B1 Block with a polished S4C trans mission
comes with ITR Valve cover. Inside is all stock other than ARP headstubs and cosmetic stock size headgasket.
Timing Belt, water pump, oil pump and tensioner. Mfactory sandwich plate.
comes with
Axles, shift linkages, throttle cable, vibration mounts, rear&side trans bracket, P2T ecu, rad hoses, and oem header,
motor runs very strong only was only put together about 5k ago. EMAIL ME with any questions.
JHPUSA Exculsive Black Hasport mounts 96-00 civic. Rear trans mount and side trans mount $110 apiece.
Complete Mugen Twin Loop Exhaust.EK9. $750 More Pics Coming Soon.
2000 Passenger Headlight $30
96-98 OEM headlights like new. Housing blacked out. $75
2000 SI Rear Seats 2 small cig burns in cushion. Uppers are mint. $80
Tanabe axle back exhaust. Small hole in axle section. $30
2000 Civic Si OEM B-pipe. $65
Armrest $40
CTR Shift Boot $25
SOLD TO Mikeycivic
FBP Power Mirrors $45 for pair has scratches on inside near window from someone trying to break in easy fix with touch paint.
FBP surrounding has small crack in it mesh is mint. $35
SOLD TO Seek167
Matrix racing front strut bar $10
Door tweeters $45
00 si Prop valve will remove remaining line. $40
B16 Ac Compressor $30
B16 power steering pump with brackets $40
2000 SI rear t bracket $45
Power door panels with switches. Driver side Panels is gone i have all switchs for both side still PM me with needs.
B16A2 Pistons and Rods $60.
2000 B16A Starter OEM. $45
2000 B16A Half Shaft $75
2000 B16A IACV $25
2000 B16A Alt. $60
B16A Ac Bracket $35
2000 Civic SI Pass. Side Vibration Mount $20
96-00 Civic Dash Harness For using integra gauge cluster. Works Perfect. Missing radio plug $30
Greddy Radiator Cap. $10
96-00 Civic HB DX Wing VSM Mint. $50
2000 Civic Si Cat Converter. No O2 Sensor. $80
JDM EK9 Civic Type R Cluster. Dont wanna sell, but i will for $350 no less. If you can get it for less than go ahead.
SOLD
96 spec ITR wheels and suspension SOLD
2000 SI Fuel Line $15
2000 SI throttle cable $15
Suspension technique rear sway bar for 92-00 civics without swaybar.needs paint. $45
<U>Have lots of other random stuff so EMAIL me with needs. Check Back will be adding more in the next couple of weeks.
Will trade for JDM EK stuff, full coilovers for ek, k series all motor/swap stuff. Ill throw cash on top if need be.</U>[/B]
Modified by cbk0485 at 10:59 AM 11/16/2008
#2
Honda-Tech Member
Join Date: Dec 2003
Location: Standing on the corner selling cocaine, rippin shows live on stage for hoes yellin my name
Posts: 1,735
Likes: 0
Received 0 Likes
on
0 Posts
Re: 2000 SI PART OUT and 96 spec ITR 4x114.4 conversion. NEPA (cbk0485)
Damn i wish you would ship.
#3
Honda-Tech Member
Join Date: Nov 2002
Location: downingtown, pa, usa
Posts: 1,152
Likes: 0
Received 0 Likes
on
0 Posts
Re: 2000 SI PART OUT and 96 spec ITR 4x114.4 conversion. NEPA (cbk0485)
looking for a bunch of stuff, lemme know what u van do for deal
console with mount bracket,tail lights,side skirts, rear bumper with lower spoiler of u have.......rear seats if unburnt
ill think of more, lil early, lil sleepy still
lemme know
console with mount bracket,tail lights,side skirts, rear bumper with lower spoiler of u have.......rear seats if unburnt
ill think of more, lil early, lil sleepy still
lemme know
Trending Topics
#16
Honda-Tech Member
Thread Starter
Re: (em Dot)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by em Dot »</TD></TR><TR><TD CLASS="quote">BUmp......maybe interested in the itr setup oh got anymore pics of the itr setup?</TD></TR></TABLE>
PMed
PMed
#18
Honda-Tech Member
Join Date: Feb 2004
Location: Harrisburg/Lanc PA
Posts: 3,319
Likes: 0
Received 0 Likes
on
0 Posts
Re: 2000 SI PART OUT and 96 spec ITR 4x114.4 conversion, B16 head. NEPA (joshc697)
bump for a legit seller and an awesome price
Just picked up the ITR 4x114.3 conversion
Just picked up the ITR 4x114.3 conversion
#19
Re: 2000 SI PART OUT and 96 spec ITR 4x114.4 conversion, B16 head. NEPA (DuongBros.)
im still interested in the rear bumper and perhaps the exhaust...still waiting on pics on that bumper and whats included with the exhaust?
#21
Honda-Tech Member
Thread Starter
Re: 2000 SI PART OUT and 96 spec ITR 4x114.4 conversion, B16 head. NEPA (DuongBros.)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DuongBros. »</TD></TR><TR><TD CLASS="quote">bump for a legit seller and an awesome price
Just picked up the ITR 4x114.3 conversion </TD></TR></TABLE>
Thanks, I hope you enjoy it. It didn't really want to let it go.
Just picked up the ITR 4x114.3 conversion </TD></TR></TABLE>
Thanks, I hope you enjoy it. It didn't really want to let it go.
#22
Honda-Tech Member
Thread Starter
Re: 2000 SI PART OUT and 96 spec ITR 4x114.4 conversion, B16 head. NEPA (terfer)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by terfer »</TD></TR><TR><TD CLASS="quote">im still interested in the rear bumper and perhaps the exhaust...still waiting on pics on that bumper and whats included with the exhaust?</TD></TR></TABLE>
Sorry I haven't updated my thread I got better pics and more stuff to add. Sorry I will send you some tonight.
Sorry I haven't updated my thread I got better pics and more stuff to add. Sorry I will send you some tonight.