92-95 Civic Mugen Lips -- Urethane WW RS Style
#101
Re: (n1div)
There is no way I'd trust that with just double-sided tape. Hit a bump with that thing and it's gone.
Put a self-tapping screw in each side where it goes into the fender well and then a couple under the lip where it comes close to the bumper in the center. Not visible and sturdy enough that it won't rip off or be easily stolen.
Put a self-tapping screw in each side where it goes into the fender well and then a couple under the lip where it comes close to the bumper in the center. Not visible and sturdy enough that it won't rip off or be easily stolen.
#102
Re: (n1div)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by n1div »</TD></TR><TR><TD CLASS="quote">Just got my lip and even though it is Urethane, it seems to be thicker and heavier than other lips I've had. Is the double sided tape enough to hold this sucker on? Anyone have any problems with their lips coming off? I'm just a bit concerned on the mounting method using only double sided tape.</TD></TR></TABLE>
Following the instructions that came with it and you won't have any problems. It recommends using tapping screws for extra security, and if you use them underneath the lip they will not be noticable. But regardless, if you clean the bumper off well with some solvents and/or promoter, the 3M tape will hold w/out any problems. Use a heatgun or hairdryer to soften up the lip so it's easy to mold/fit onto the bumper and will be on there nice & secure.
Following the instructions that came with it and you won't have any problems. It recommends using tapping screws for extra security, and if you use them underneath the lip they will not be noticable. But regardless, if you clean the bumper off well with some solvents and/or promoter, the 3M tape will hold w/out any problems. Use a heatgun or hairdryer to soften up the lip so it's easy to mold/fit onto the bumper and will be on there nice & secure.
#103
Honda-Tech Member
Join Date: Jul 2004
Location: Chicago, IL, USA
Posts: 592
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Newman)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Newman »</TD></TR><TR><TD CLASS="quote">
Following the instructions that came with it and you won't have any problems. It recommends using tapping screws for extra security, and if you use them underneath the lip they will not be noticable. But regardless, if you clean the bumper off well with some solvents and/or promoter, the 3M tape will hold w/out any problems. Use a heatgun or hairdryer to soften up the lip so it's easy to mold/fit onto the bumper and will be on there nice & secure.</TD></TR></TABLE>
Thanks for the help. I didn't find any instructions with the lip. I only received the lip itself and was wondering if I was missing any additional hardware or instructions. Now I know.
Following the instructions that came with it and you won't have any problems. It recommends using tapping screws for extra security, and if you use them underneath the lip they will not be noticable. But regardless, if you clean the bumper off well with some solvents and/or promoter, the 3M tape will hold w/out any problems. Use a heatgun or hairdryer to soften up the lip so it's easy to mold/fit onto the bumper and will be on there nice & secure.</TD></TR></TABLE>
Thanks for the help. I didn't find any instructions with the lip. I only received the lip itself and was wondering if I was missing any additional hardware or instructions. Now I know.
#106
Re: (honda eg9)
Unfortunately for sedan lips, the demand is not that great at this time in order to cover the cost of making the mold for it. However, we have something else in mind for the sedans but probably won't be available until sometime next spring.
#109
Re: 92-95 Civic Mugen Lips -- Urethane WW RS Style (SawBoss)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SawBoss »</TD></TR><TR><TD CLASS="quote">bump. whats the word on the spoon replicas?</TD></TR></TABLE>
same question haha. btw newman...i received my eg rear lip before christmas and gotta say you guys are great sellers and keep the buyer updated when its gonna show up. thanks
same question haha. btw newman...i received my eg rear lip before christmas and gotta say you guys are great sellers and keep the buyer updated when its gonna show up. thanks
#115
Member
iTrader: (1)
Join Date: Apr 2003
Location: San Diego, CA
Posts: 1,289
Likes: 0
Received 0 Likes
on
0 Posts
Re: 92-95 Civic Mugen Lips -- Urethane WW RS Style (Newman)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Newman »</TD></TR><TR><TD CLASS="quote">The Spoon lips will be out shortly. Bump for the Mugen lips </TD></TR></TABLE>
the suspense is killing me! bump it!!
the suspense is killing me! bump it!!
#119
Honda-Tech Member
Join Date: Nov 2004
Location: AWD launchin on foolz
Posts: 1,021
Likes: 0
Received 0 Likes
on
0 Posts
Re: 92-95 Civic Mugen Lips -- Urethane WW RS Style (90civichb)
I ordered mine the day you guys put it on site because I'd been waiting.
End of July -> now and still in perfectly fine condition, looks great, completely attached with the included adhesive strip.
Just waiting for the 5g Hatch Mugen OE skirts (that actually look like the real ones, not 6g :D) and I'm ordering them from you too.
End of July -> now and still in perfectly fine condition, looks great, completely attached with the included adhesive strip.
Just waiting for the 5g Hatch Mugen OE skirts (that actually look like the real ones, not 6g :D) and I'm ordering them from you too.