FULLY BUILT!! 1993 Mazda RX-7 FD3S ! @LOOK@ FS/FT
09-19-2010, 10:59 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Apr 2008
Location: rockford, il, usa
Posts: 1,661
Likes: 0
Received 0 Likes
on
0 Posts
FULLY BUILT!! 1993 Mazda RX-7 FD3S ! @LOOK@ FS/FT
MOST IMPORTANT!!! IM POSTING THIS FOR MY GRANDFATHER!!!
I will not be on here or him to check pm's etc
so please!!!!!
ONLY! CALL 815-494-6748
OR TEXT 608-290-8514 THANKS! PRICE IS 11,500$ HE NEED GONE!
OR TRADE: for something nice and new... rx8,350z,civic si,lancer, etc etc
here's a short run down...
1993 Mazda RX7 FD3S RUNS/DRIVES. . 5 speed with no grinds!!. The engine has 30k miles on it with 120PSI of compression on both rotors on a cold start. In other words, this is a VERY HEALTHY motor. Oil is changed every 2k miles with Castrol GTX.
Do not get fooled or buy the wrong RX7.
This one has all the RELIABILITY MODS done. The downfall of the rx7's rotary engine was not because it was poorly designed but because there was too much heat due to the turbos. It is now 2010 and rotary engines have come a long way. If you do these mods, the engine becomes instantly dead reliable and able to live for a long time. That is why the Naturally aspirated 13b rotary engines have owners running their cars up to 200k miles. Because that engine produces way less heat then a turbo motor does. These mods are very expensive and ESSENTIAL for the health and longterm life of the motor. If you buy a car without these mods, chances are, the motor will tank sooner then later. Also if you buy an automatic trans RX7, chances are the motor will die prematurely from the heat the transmission produces. The mods are as follows:
engine re-built 3mm apexi seals, mild port,forged dowels,everything welded no ebay block off plates etc. ceramic coated/painted engine etc
HKS 1,200$ clutch!+ lightweight flywheel.
engine torque damper.
Intercooler (Apexi) w/ SSQV Blow off valve and hard piping.
HKS Downpipe, midpipe, HKS Hi-power catback 4"
Non-sequential OEM turbos spec-r "02
Removal of the "rat's nest" and all air-pump and emission with block of plates!
Apexi Power FC and commander tuned.
800cc injectors/in tank ump with swirl etc
HKS tunnel ram intake and generic filters.
all new fluids/belts/ everything working at tip tops!!
Other modifications include:
Shine Auto Re Diffuser
JDM taillights efini
Mazdaspeed CARBONFIBER Front lip
R1 Suede seats (i can include original leather tan seats also)
Stillen 17x10.5" wheels with 275 tires in the
Short shifter w/ rx8 shift **** and new boot
coilovers and all new es suspension bushings/tranny mount/engine mounts etc
ebc pads and slotted rotors!! stops on a dime!!!
NOT A SPEC OF RUST OF ANY DENTS!!! for a 1993 this is better condition then my 06 bmw~
interior is PERFECT!! everything works as should!! powersteering works perfect and A/c is all there just needs belt/charge.
The engine and transmission is tip top! no leaks etc.
This car is extremely powerfull!! 387whp approx.
Call or text for test drive/meet.
THERE'S ALOT MORE TO IT!! but this is all on top of my head!!
fyi: we bought the car for 8,500 engine was rebuilt/body work on every panel/new paint etc. hes got 14k into it.
I will not be on here or him to check pm's etc
so please!!!!!
ONLY! CALL 815-494-6748
OR TEXT 608-290-8514 THANKS! PRICE IS 11,500$ HE NEED GONE!
OR TRADE: for something nice and new... rx8,350z,civic si,lancer, etc etc
here's a short run down...
1993 Mazda RX7 FD3S RUNS/DRIVES. . 5 speed with no grinds!!. The engine has 30k miles on it with 120PSI of compression on both rotors on a cold start. In other words, this is a VERY HEALTHY motor. Oil is changed every 2k miles with Castrol GTX.
Do not get fooled or buy the wrong RX7.
This one has all the RELIABILITY MODS done. The downfall of the rx7's rotary engine was not because it was poorly designed but because there was too much heat due to the turbos. It is now 2010 and rotary engines have come a long way. If you do these mods, the engine becomes instantly dead reliable and able to live for a long time. That is why the Naturally aspirated 13b rotary engines have owners running their cars up to 200k miles. Because that engine produces way less heat then a turbo motor does. These mods are very expensive and ESSENTIAL for the health and longterm life of the motor. If you buy a car without these mods, chances are, the motor will tank sooner then later. Also if you buy an automatic trans RX7, chances are the motor will die prematurely from the heat the transmission produces. The mods are as follows:
engine re-built 3mm apexi seals, mild port,forged dowels,everything welded no ebay block off plates etc. ceramic coated/painted engine etc
HKS 1,200$ clutch!+ lightweight flywheel.
engine torque damper.
Intercooler (Apexi) w/ SSQV Blow off valve and hard piping.
HKS Downpipe, midpipe, HKS Hi-power catback 4"
Non-sequential OEM turbos spec-r "02
Removal of the "rat's nest" and all air-pump and emission with block of plates!
Apexi Power FC and commander tuned.
800cc injectors/in tank ump with swirl etc
HKS tunnel ram intake and generic filters.
all new fluids/belts/ everything working at tip tops!!
Other modifications include:
Shine Auto Re Diffuser
JDM taillights efini
Mazdaspeed CARBONFIBER Front lip
R1 Suede seats (i can include original leather tan seats also)
Stillen 17x10.5" wheels with 275 tires in the
Short shifter w/ rx8 shift **** and new boot
coilovers and all new es suspension bushings/tranny mount/engine mounts etc
ebc pads and slotted rotors!! stops on a dime!!!
NOT A SPEC OF RUST OF ANY DENTS!!! for a 1993 this is better condition then my 06 bmw~
interior is PERFECT!! everything works as should!! powersteering works perfect and A/c is all there just needs belt/charge.
The engine and transmission is tip top! no leaks etc.
This car is extremely powerfull!! 387whp approx.
Call or text for test drive/meet.
THERE'S ALOT MORE TO IT!! but this is all on top of my head!!
fyi: we bought the car for 8,500 engine was rebuilt/body work on every panel/new paint etc. hes got 14k into it.
09-19-2010, 11:05 AM
#3
Honda-Tech Member
Thread Starter
Join Date: Apr 2008
Location: rockford, il, usa
Posts: 1,661
Likes: 0
Received 0 Likes
on
0 Posts
Re: FULLY BUILT!! 1993 Mazda RX-7 FD3S ! @LOOK@ FS/FT
!!!! FOR GOT TO MENTION !!
1/2 BRIDGE PORTED PLATES+2x850cc PRIMARY INJECTORS 2x1680cc SECONDARY INJECTORS ON 2ND FUEL RAIL
Last edited by krysted9354; 09-19-2010 at 12:35 PM.
Trending Topics
09-19-2010, 03:18 PM
#11
Honda-Tech Member
Thread Starter
Join Date: Apr 2008
Location: rockford, il, usa
Posts: 1,661
Likes: 0
Received 0 Likes
on
0 Posts
09-20-2010, 08:01 AM
#14
Honda-Tech Member
Thread Starter
Join Date: Apr 2008
Location: rockford, il, usa
Posts: 1,661
Likes: 0
Received 0 Likes
on
0 Posts
Re: FULLY BUILT!! 1993 Mazda RX-7 FD3S ! @LOOK@ FS/FT
u guys are 100% , the coolant reservoir was open so when he came to a sudden stop it spilled , so the smoke was steam!! sorry but n biggy as thats hwy i posted vide. i put the cap back on now no steam and spills (:
09-21-2010, 03:16 PM
#16
Honda-Tech Member
Join Date: Nov 2007
Location: Pleasant prairie, Wisconsin, Usa
Posts: 550
Likes: 0
Received 0 Likes
on
0 Posts
Re: FULLY BUILT!! 1993 Mazda RX-7 FD3S ! @LOOK@ FS/FT
Bump for parking next to you at gurnee mills a while ago. Green mustang with stickers all over
09-22-2010, 01:43 PM
#18
Honda-Tech Member
Join Date: Jun 2004
Location: windy city, ILLNOIZE, U.S.of A
Posts: 2,718
Likes: 0
Received 0 Likes
on
0 Posts
Re: FULLY BUILT!! 1993 Mazda RX-7 FD3S ! @LOOK@ FS/FT
i would have picked this up 3 months ago if it was up for sale instead of my Z. oh well. good luck.
Thread
Thread Starter
Forum
Replies
Last Post
yckan47
Honda CRX / EF Civic (1988 - 1991)
3
07-27-2014 05:46 PM
krysted9354
Vehicles for sale
14
05-11-2011 05:02 AM
gusisboosted
Vehicles for sale
194
11-14-2010 09:38 AM
