Civic Interior (EH3), MISC. Civic Stuff , B-Series Parts, and Custom Tucked Harnesses
09-02-2008, 05:05 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Feb 2006
Posts: 1,347
Likes: 0
Received 0 Likes
on
0 Posts
Civic Interior (EH3), MISC. Civic Stuff , B-Series Parts, and Custom Tucked Harnesses
Hey everyone, I'm trying to clean out my parents garage and living space back at home and earn a little cash to keep my head above water until I find a job...
Everything listed is located in Madison, WI... I can arrange ship anything I have for sale at buyer's cost... All Items listed are BEST OFFER other than Custom Harnesses... PM me for any details or if you want pics of an item listed here w/out an image...
Message me. This is the best way to get a hold of me.
-Both Front & Rear Seats, Door Panels, Rear Speaker Mounts w/ Vented Covers, & Cargo Cover pulled from a '94 Honda Civic Si (EH3).
*Fabrics from Seats and Door Panels Have No Rips, Stains, or Burns Whatsoever*
-EH3 Gauge Cluster (Non-ABS)
-EH/EG Gauge Cluster Surround *Mint - 2 available
-EH Digital Dash Clocks (x2)
-EH/EG Hazard Switches (x8)
-EH Cx Trim Level Front "Pleather" Seats (driver's side ripped; Passenger's is good) $10 for Both! Comes with Rails Too...
-Lots Of EH/EG Dash Switches; I.E. Dimmer, Moon Roof, Power Mirror, DeFog, Fog Lamps, Etc... Pm me if you need a certain EH/EG switch & I'll let you know...
-Unorthodox Racing Ultra R Crank Pulley (B-Series, Single Belt)
-OEM Honda Timing Belt (B16)
-OEM Cam Gear Set (x3)
-Back and Upper Timing Covers (B16 and B18A/B)
-Polyurethane Rear Strut Mount kit (EH/EG)
-DC Sports 1-Piece Header (B Series)
- ~ All OEM Firewall Grommets and Plugs ('88-'00 Civic)
- LMAs (B16A1) (x4)
-'90-'93 Integra (Manual Trans) Intermediate Shaft
-Complete Engine Harness from '94 Honda Civic Si
-Alt. Belt (~5,000 miles; like new) (B16A1)
-Crank pulley bolt w/ matching spacer/washer (B-Series)
-Cam Gear Bolts and Washers (x2 Sets)
-PCV "Black Box" (Re-Finished/MINT for B-Series) (x2)
-Charcoal Canisters (x1 EH/EG and x1 from an EM1)
-Resistor Boxes w/ matching Male/Female harness clips (x3)
-Stock Engine Harness Resistor Box Block-Off Plugs (x5)
-Driver's Side Innovative Engine Mount taken out of an '89 CRX (B-Series, Red Poly.)
-VTEC Solenoid and Pressure Switch w/ harness/spark plug wires bracket (B16A1)
-VTEC Pressure Switches (x5)
-EH/EG Front Mud Flaps (x2)
-Black Rubber Trim Circling (square-ish) the Shift Boot From the Center Console of '89 CRX
-EH/EG Interior Mirror Triangles (Left & Right, Power)
Random things in pic (some things in picture aren't for sale, just ask me)
Koyo Aluminum Radiator in great condition w/ slim fan (don't really want to sell, but I'm broke...)
Custom "Fully Tucked" OBD1 B-Series Engine Harnesses... (OBD0 or OBD2 possible if you first provide the OBD0 or OBD2 oem harness) They Are Direct Fit Plug-Ins. You Simply Have to Create the Passageway Through the Center of Your Firewall. No Modifications to the Harness Necessary For Install... They Are Wrapped in Black High-Temp Braided Nylon...
Harness shown in pictures is OBD2 and fully loomed w/ heat shrink which I Made and Installed on an EM1, Before and After...
Headlight Harness for "EKs"
Car Audio:
-MTX 8" Truck Sub Boxes (only one working 8" MTX Sub included)
-*NIB Car Audio Wiring Kit
Bump Me
Everything listed is located in Madison, WI... I can arrange ship anything I have for sale at buyer's cost... All Items listed are BEST OFFER other than Custom Harnesses... PM me for any details or if you want pics of an item listed here w/out an image...
Message me. This is the best way to get a hold of me.
-Both Front & Rear Seats, Door Panels, Rear Speaker Mounts w/ Vented Covers, & Cargo Cover pulled from a '94 Honda Civic Si (EH3).
*Fabrics from Seats and Door Panels Have No Rips, Stains, or Burns Whatsoever*
-EH3 Gauge Cluster (Non-ABS)
-EH/EG Gauge Cluster Surround *Mint - 2 available
-EH Digital Dash Clocks (x2)
-EH/EG Hazard Switches (x8)
-EH Cx Trim Level Front "Pleather" Seats (driver's side ripped; Passenger's is good) $10 for Both! Comes with Rails Too...
-Lots Of EH/EG Dash Switches; I.E. Dimmer, Moon Roof, Power Mirror, DeFog, Fog Lamps, Etc... Pm me if you need a certain EH/EG switch & I'll let you know...
-Unorthodox Racing Ultra R Crank Pulley (B-Series, Single Belt)
-OEM Honda Timing Belt (B16)
-OEM Cam Gear Set (x3)
-Back and Upper Timing Covers (B16 and B18A/B)
-Polyurethane Rear Strut Mount kit (EH/EG)
-DC Sports 1-Piece Header (B Series)
- ~ All OEM Firewall Grommets and Plugs ('88-'00 Civic)
- LMAs (B16A1) (x4)
-'90-'93 Integra (Manual Trans) Intermediate Shaft
-Complete Engine Harness from '94 Honda Civic Si
-Alt. Belt (~5,000 miles; like new) (B16A1)
-Crank pulley bolt w/ matching spacer/washer (B-Series)
-Cam Gear Bolts and Washers (x2 Sets)
-PCV "Black Box" (Re-Finished/MINT for B-Series) (x2)
-Charcoal Canisters (x1 EH/EG and x1 from an EM1)
-Resistor Boxes w/ matching Male/Female harness clips (x3)
-Stock Engine Harness Resistor Box Block-Off Plugs (x5)
-Driver's Side Innovative Engine Mount taken out of an '89 CRX (B-Series, Red Poly.)
-VTEC Solenoid and Pressure Switch w/ harness/spark plug wires bracket (B16A1)
-VTEC Pressure Switches (x5)
-EH/EG Front Mud Flaps (x2)
-Black Rubber Trim Circling (square-ish) the Shift Boot From the Center Console of '89 CRX
-EH/EG Interior Mirror Triangles (Left & Right, Power)
Random things in pic (some things in picture aren't for sale, just ask me)
Koyo Aluminum Radiator in great condition w/ slim fan (don't really want to sell, but I'm broke...)
Custom "Fully Tucked" OBD1 B-Series Engine Harnesses... (OBD0 or OBD2 possible if you first provide the OBD0 or OBD2 oem harness) They Are Direct Fit Plug-Ins. You Simply Have to Create the Passageway Through the Center of Your Firewall. No Modifications to the Harness Necessary For Install... They Are Wrapped in Black High-Temp Braided Nylon...
Harness shown in pictures is OBD2 and fully loomed w/ heat shrink which I Made and Installed on an EM1, Before and After...
Headlight Harness for "EKs"
Car Audio:
-MTX 8" Truck Sub Boxes (only one working 8" MTX Sub included)
-*NIB Car Audio Wiring Kit
Bump Me
Last edited by Josh C.; 12-25-2014 at 10:31 AM. Reason: Updated contact informantion.
09-02-2008, 11:31 AM
#3
Honda-Tech Member
Thread Starter
Join Date: Feb 2006
Posts: 1,347
Likes: 0
Received 0 Likes
on
0 Posts
Re: (prototype2)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by prototype2 »</TD></TR><TR><TD CLASS="quote">what's your price for the back speaker covers?</TD></TR></TABLE> PMed
~
Trending Topics
09-02-2008, 08:37 PM
#9
Honda-Tech Member
Thread Starter
Join Date: Feb 2006
Posts: 1,347
Likes: 0
Received 0 Likes
on
0 Posts
Re: (JcDrMx)
These fully tucked EM1 pictures are of my last side job I did before I moved back up to Minneapolis for school, that's why I posted up the before and after bay pictures, to show what my harness looks like. After running along side the T bracket, it lays along side the engine with a snug but comfortable fit... Every sensor has just enough room to go where it needs to be plus an inch or two of wiggle room...
I'll PM some more of you tomorrow, I have to sleep in order to function tomorrow at 8am class
I'll PM some more of you tomorrow, I have to sleep in order to function tomorrow at 8am class
next summer 
09-04-2008, 08:57 AM
#16
Member
Join Date: Apr 2004
Location: Madison, WI
Posts: 2,180
Likes: 0
Received 0 Likes
on
0 Posts
Re: (JcDrMx)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JcDrMx »</TD></TR><TR><TD CLASS="quote">damn who did the tuck?</TD></TR></TABLE>
Josh C.
Josh C.
09-14-2008, 10:06 PM
#24
Honda-Tech Member
Thread Starter
Join Date: Feb 2006
Posts: 1,347
Likes: 0
Received 0 Likes
on
0 Posts
Re: Civic Interior (EH3), MISC. Civic Stuff , B-Series Parts, and Custom Tucked Harnesses (Josh C.)
Bump, interior can be delivered up to or just over one hour from Madison, WI for free. 