Chicago buy/sell/trade
#51
Junior Member
Join Date: Sep 2003
Location: McHenry, Il, USA
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
FS: B20 Short Block. STR Blockguard, Honed, cleaned. 0 miles. Basicly brand new. Oil line taped and attached ready to go. Perfect for B20 Vtec. B16 water pump, B16 oil pump, pistons, rods. Everything is ready to be installed. Must be put together.
$600
WTB: B18a/b or B20 needing resleeving.
$600
WTB: B18a/b or B20 needing resleeving.
#53
Junior Member
Join Date: Aug 2003
Location: north suburbs, il, USA
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
Re: Chicago buy/sell/trade (Mooneyes13)
I have the following for sale or trade
1 set del sol 14in wheels need two tires for sure 150obo
1 set of 00 si wheels need tires pretty clean 225obo
aem short ram for a 00 ex
1 set adr dv-8 rims in black 17x7 1 rim cracked 275obo no tires
2 or more pm6 ecus 90and up
Alpine mrv-1507 car amp plays big sound just too big for my hatch 150obo
2 hf manifolds for homemade turbo kits 25 bucks each
2 eclipse sidemounts
stock ef armrest not perfect but it works gotta find it in the basement. make offer
d16a6 throttle body with sensor make offer.
I need my tranny changed bring your tools and help me and make some cash. I would like to do it on the 25th. I also need 2 185/60/14s and also lca bushings for the rear of a 90 si hatch.
Modified by feelsfast at 5:06 PM 7/19/2005
Modified by feelsfast at 5:10 PM 7/19/2005
1 set del sol 14in wheels need two tires for sure 150obo
1 set of 00 si wheels need tires pretty clean 225obo
aem short ram for a 00 ex
1 set adr dv-8 rims in black 17x7 1 rim cracked 275obo no tires
2 or more pm6 ecus 90and up
Alpine mrv-1507 car amp plays big sound just too big for my hatch 150obo
2 hf manifolds for homemade turbo kits 25 bucks each
2 eclipse sidemounts
stock ef armrest not perfect but it works gotta find it in the basement. make offer
d16a6 throttle body with sensor make offer.
I need my tranny changed bring your tools and help me and make some cash. I would like to do it on the 25th. I also need 2 185/60/14s and also lca bushings for the rear of a 90 si hatch.
Modified by feelsfast at 5:06 PM 7/19/2005
Modified by feelsfast at 5:10 PM 7/19/2005
#55
Honda-Tech Member
Join Date: Apr 2002
Location: DEERFIELD DA HOOD, IL, USA
Posts: 1,035
Likes: 0
Received 0 Likes
on
0 Posts
Re: (XX Boosted Si XX)
#56
Honda-Tech Member
Join Date: Sep 2002
Location: IllNoise, Il, USA
Posts: 1,273
Likes: 0
Received 0 Likes
on
0 Posts
Re: (s2k)
FS: Zex wet kit complete 315 obo
GSR rear anti sway bar...14mm...make offer
AC compressor...make offer
Turntables...mixer and case...PM for details...want it out of my house
Modified by CivicSiR at 1:20 AM 7/15/2005
GSR rear anti sway bar...14mm...make offer
AC compressor...make offer
Turntables...mixer and case...PM for details...want it out of my house
Modified by CivicSiR at 1:20 AM 7/15/2005
#57
Honda-Tech Member
Join Date: Apr 2005
Location: Chicago
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Re: I need two Items!!!
The first item that I need is a front driver side lower control arm that will fit a 1997 honda civic ex coupe.
The second item that I need, are speakers for the rear and the front, also that will fit a 1997 honda civic ex coupe.
Please PM me and let me know. Thanks for all your help!!
Modified by Teachhistory at 2:08 PM 7/13/2005
The second item that I need, are speakers for the rear and the front, also that will fit a 1997 honda civic ex coupe.
Please PM me and let me know. Thanks for all your help!!
Modified by Teachhistory at 2:08 PM 7/13/2005
#58
Honda-Tech Member
Join Date: Sep 2003
Location: Racine, WI, USA
Posts: 1,198
Likes: 0
Received 0 Likes
on
0 Posts
Re: I need two Items!!! (Teachhistory)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Teachhistory »</TD></TR><TR><TD CLASS="quote"> The first item that I need is a driver side lower control arm that will fit a 1997 honda civic ex coupe.
The second item that I need, are speakers for the rear and the front, also that will fit a 1997 honda civic ex coupe.
Please PM me and let me know. Thanks for all your help!!
</TD></TR></TABLE>
front or rear lower control arm, i have the front and the rear, i will probably have soon
The second item that I need, are speakers for the rear and the front, also that will fit a 1997 honda civic ex coupe.
Please PM me and let me know. Thanks for all your help!!
</TD></TR></TABLE>
front or rear lower control arm, i have the front and the rear, i will probably have soon
#64
#65
Honda-Tech Member
Re: (slow99si)
FS testing waters on a D16z6 head unknown miles comes with intake manifold, camshaft, cam gear, vtec solenoid, and valve cover. and a alternator off of the z6
#66
Re: (importdreamer)
For Sale / For Trade
Custom Intercooler Sprayer $40
GSR Intake Manifold $50
RJS 5pt Racing Harness $Best Offer
OEM Civic Fuel Pump$25
96-00 OEM Civic Cluster Bezel $20
OBD2 Civic Cat $45
OBD2 Integra Cat $45
ROTA Center Caps $15
16 inch Kaotik Spawn rims with Dunlop tires $300
Jackson Racing Boost Timing Controller $125
MOMO Leather shift *** $15
APC shift *** Black and Silver $15
EX Springs 96-00 $25
To view pics of for sale items go to http://photos.yahoo.com/emilparz
WTB
Intergra OEM 94-97 front and rear bumper
Windsheild trim on drivers side
Struts for my 95 SI Koni's or something of that quality
6 1/2 mid range speaker.
Willing to make trades
Vouch Thread https://honda-tech.com/zerothread?id=1069202
Vouches: CTRb18c, Convoy, Knightman, Hybrid1992, JDM1civic, 88slowcrx, Dr. Beaver, Wickedplastikman, Silinteg90, lke2drvgsr, 89SiPimpin, integraXTC, m3bluegsr, JDM EJ1 95, dvela85
Custom Intercooler Sprayer $40
GSR Intake Manifold $50
RJS 5pt Racing Harness $Best Offer
OEM Civic Fuel Pump$25
96-00 OEM Civic Cluster Bezel $20
OBD2 Civic Cat $45
OBD2 Integra Cat $45
ROTA Center Caps $15
16 inch Kaotik Spawn rims with Dunlop tires $300
Jackson Racing Boost Timing Controller $125
MOMO Leather shift *** $15
APC shift *** Black and Silver $15
EX Springs 96-00 $25
To view pics of for sale items go to http://photos.yahoo.com/emilparz
WTB
Intergra OEM 94-97 front and rear bumper
Windsheild trim on drivers side
Struts for my 95 SI Koni's or something of that quality
6 1/2 mid range speaker.
Willing to make trades
Vouch Thread https://honda-tech.com/zerothread?id=1069202
Vouches: CTRb18c, Convoy, Knightman, Hybrid1992, JDM1civic, 88slowcrx, Dr. Beaver, Wickedplastikman, Silinteg90, lke2drvgsr, 89SiPimpin, integraXTC, m3bluegsr, JDM EJ1 95, dvela85
#67
Re: (e'sd16)
Brand New OEM eg si/ex front lip new in box. il throw in mounting hardware i have. $85
Brand new Aluminum ic piping from kteller all the piping you need to make you kit for civic or teg. and others im sure. $175
Also got 4 Quarts of GM synchromesh friction modified. $42
2 week old JG Victor X manifold for b16/b18c5 $300obo
momo wheel and hub for eg - $250
Brand new Aluminum ic piping from kteller all the piping you need to make you kit for civic or teg. and others im sure. $175
Also got 4 Quarts of GM synchromesh friction modified. $42
2 week old JG Victor X manifold for b16/b18c5 $300obo
momo wheel and hub for eg - $250
#68
Honda-Tech Member
testing waters: b16b complete and/or engine parts.
i'm willing to part out if no one wants to buy the complete swap.
b16b (Civic Type R)
everything completely assembled still in car.
looking to sell complete as a complete swap or consider parting out.
installed in a 1996 civic hatchback so if it is sold as a complete swap including wiring, throttle cable, brackets, axles, ecu, engine mounts, etc. it'll be a bolt-in plug and play affair. this setup made 180whp on a dynojet with dyno graph to prove.
stock CTR block.
stock CTR tranny w/LSD of course with the bronze mega jdm shift linkage and CTR shifter.
exedy cerametallic thick clutch
exedy chromoly flywheel
all engine mounts liquid urethane filled
mugen oil pan
mugen head gasket
ARP head studs
new timing belt
new water pump
new tensioner
new seals (cam, crank, oil pan gasket)
S1M mild pnp with 3 angle valve job
Supertech flat valves
Omni valve springs
Supertech retainers
portflow valve guides
buddy club spec 3 cams
str cam gears
str cam seal
hondata intake manifold gasket
extrude honed and angle milled JDM ITR intake manifold (pic is stock) for those of you who know, you know how expensive extrude honing is.
JDM ITR throttle body
JUN header (pic is apexi ss gt)
msd wires
msd 6al
msd ss blaster coil
msd distributor cap
msd 2 step
climax fuel rail
P28 Katman custom ecu
VAFC2 tuned to motor
top fuel intake with k&n filter (the intake that j's racing copied)
all of this totals out to over $10k MSRP without labor. asking $7000 obo.
pm me here, or email me at jsu@suja1.com, or call 630-407-0711. ask for PB.
b16b (Civic Type R)
everything completely assembled still in car.
looking to sell complete as a complete swap or consider parting out.
installed in a 1996 civic hatchback so if it is sold as a complete swap including wiring, throttle cable, brackets, axles, ecu, engine mounts, etc. it'll be a bolt-in plug and play affair. this setup made 180whp on a dynojet with dyno graph to prove.
stock CTR block.
stock CTR tranny w/LSD of course with the bronze mega jdm shift linkage and CTR shifter.
exedy cerametallic thick clutch
exedy chromoly flywheel
all engine mounts liquid urethane filled
mugen oil pan
mugen head gasket
ARP head studs
new timing belt
new water pump
new tensioner
new seals (cam, crank, oil pan gasket)
S1M mild pnp with 3 angle valve job
Supertech flat valves
Omni valve springs
Supertech retainers
portflow valve guides
buddy club spec 3 cams
str cam gears
str cam seal
hondata intake manifold gasket
extrude honed and angle milled JDM ITR intake manifold (pic is stock) for those of you who know, you know how expensive extrude honing is.
JDM ITR throttle body
JUN header (pic is apexi ss gt)
msd wires
msd 6al
msd ss blaster coil
msd distributor cap
msd 2 step
climax fuel rail
P28 Katman custom ecu
VAFC2 tuned to motor
top fuel intake with k&n filter (the intake that j's racing copied)
all of this totals out to over $10k MSRP without labor. asking $7000 obo.
pm me here, or email me at jsu@suja1.com, or call 630-407-0711. ask for PB.
#70
Honda-Tech Member
Re: testing waters: b16b complete and/or engine parts. (klubhed1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by klubhed1 »</TD></TR><TR><TD CLASS="quote">7k for a motor that makes 180whp???? sounds a little crazy to me</TD></TR></TABLE>
i understand it doesn't make power like a 1.8 or 2.0, and others understand that too. remember, this is a 1.6L motor.
it's the parts that are worth that much.
i understand it doesn't make power like a 1.8 or 2.0, and others understand that too. remember, this is a 1.6L motor.
it's the parts that are worth that much.
#72
Honda-Tech Member
Join Date: Mar 2004
Location: Suburbs of Chicago, IL, USA
Posts: 426
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Noch)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Noch »</TD></TR><TR><TD CLASS="quote">I'm looking for Vision amber corners for EG...!</TD></TR></TABLE>
anyone?
anyone?
#75
Honda-Tech Member
Join Date: Mar 2004
Location: Suburbs of Chicago, IL, USA
Posts: 426
Likes: 0
Received 0 Likes
on
0 Posts
Re: (blackie)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by blackie »</TD></TR><TR><TD CLASS="quote">are you the one that rides on slips and just recently got in an accident?</TD></TR></TABLE>
not me...if that question was directed towards me
not me...if that question was directed towards me