Go Back   Honda-Tech > Members List
Sign in using an external account
Register Forgot Password?
Search


Welcome to Honda-Tech!
Welcome to Honda-Tech.com.

You are currently viewing our forums as a guest, which gives you limited access to view most discussions and access our other features. By joining our community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join the Honda-Tech community today!


StolenTeg StolenTeg is offline

Honda-Tech Member

Latest Activity

StolenTeg's Activity
how much shipped for the invidia q300 01108
Official S2000 For Sale Thread V.2.0 ***OLD***
"Since the other one got to past 100 pages and became a bit hard to weed through it, this is the new FS thread. Post your stuff in here."
2 years ago in Honda S2000
tunerview sold
FS: 24.5x8x13 Slicks, Tunerview, hasport axles etc
"24.5x8x13 MH Slicks on 13 inch Panasport race version wheels, I used these on my hatch and was cutting 1.6 all day at a mediocre track. 450 Brand New TunerView II Large Dash kit WITH Hondata module for Kpro or S300 Also work on Ectune, Neptune RTP, Crome. This basically let you monitor a/f,ect,tps,map,coolant,knock, rpm, iat, duty cycle, vss WITHOUT the use of a laptop. Also come with the faceplate where you install the tunerview into your factory radio location 185 More info can be find here, K-swap Hasport axles, these were on the car but never driven on 150. Will work on EG/DC/EK 32mm hub Rsx-s shifter box 40"
2 years ago in Northeast (Sales)
Anyone have the inside rearview mirror and the right front wheel speed sensor
Official S2000 For Sale Thread V.2.0 ***OLD***
"Since the other one got to past 100 pages and became a bit hard to weed through it, this is the new FS thread. Post your stuff in here."
2 years ago in Honda S2000
WTB Rear view mirror
Official S2000 For Sale Thread V.2.0 ***OLD***
"Since the other one got to past 100 pages and became a bit hard to weed through it, this is the new FS thread. Post your stuff in here."
2 years ago in Honda S2000
location?
******************S2000 PARTOUT*****************
"All prices include shipping Paypal Verified Please PM me with any further inquiries. Thanks! 1. BB Trunk Lid 2. AP2 Door Panels 3. AP2 Headlights w/ Bulbs + Ballasts 4. AP2 Steering Wheel 5. Black Face AP2 Bezel 6. AP2 Cluster 7. AP2 Radio Door 8. AP2 Exhaust Tips 9. BB Hood 10. AP2 Rear Bumper 11. Passenger Fender 12. Driver Fender $300 13.OEM Air Box w/ Filter $100 14. Pass + Driver Seat Belts 15. S2000 Sun Visors 16. Driver Side Roll Bar Plastic 17. Passenger Side Roll Bar Plastic Cover 18. Driver + Passenger Roll Bars 19. Passenger Side Air Bag 20. Windshield Wiper Cover 21. AP2 Center Console Leather 22. AP2 Crash Beam 23. AP2 Headlight and Windshiled Switches 24. Passenger Side Cargo Net 25. Driver & Passenger Kick Panels 26. Glove Box 27. AC Plastic Cover 28. Behind Seat ..."
2 years ago in For Sale
MrJdm where are you located
Official S2000 For Sale Thread V.2.0 ***OLD***
"Since the other one got to past 100 pages and became a bit hard to weed through it, this is the new FS thread. Post your stuff in here."
2 years ago in Honda S2000
ttt
FS: 24.5x8x13 Slicks, Tunerview, hasport axles etc
"24.5x8x13 MH Slicks on 13 inch Panasport race version wheels, I used these on my hatch and was cutting 1.6 all day at a mediocre track. 450 Brand New TunerView II Large Dash kit WITH Hondata module for Kpro or S300 Also work on Ectune, Neptune RTP, Crome. This basically let you monitor a/f,ect,tps,map,coolant,knock, rpm, iat, duty cycle, vss WITHOUT the use of a laptop. Also come with the faceplate where you install the tunerview into your factory radio location 185 More info can be find here, K-swap Hasport axles, these were on the car but never driven on 150. Will work on EG/DC/EK 32mm hub Rsx-s shifter box 40"
2 years ago in Northeast (Sales)
24.5x8x13 MH Slicks on 13 inch Panasport race version wheels, I used these on my hatch and was cutting 1.6 all day at a mediocre track. 450 Brand New TunerView II Large Dash kit WITH Hondata module for Kpro or S300 Also work on Ectune, Neptune RTP, Crome. This basically let you monitor a/f,ect,tps,map,coolant,knock, rpm, iat, duty cycle, vss WITHOUT the use of a laptop. Also come with the faceplate where you install the tunerview into your factory radio location 185 ...
+ 2 more images
2 years ago in Northeast (Sales)
The good heads have no problem? no bad seal/bent valve etc? willing to ship?
S2000 engine parts!
"I have a few F20C parts laying around that I don't have any use for: *01 F20C block- suffered dropped valves and destroyed 2 sleeves. Good for a sleeved block build. Approximately 90K, comes with girdle and timing cover. *00 F20C block- suffered spun rod and scarred cylinder walls. May be able to bore out .25mm but will need machinist to confirm. Unknown miles, comes with girdle and timing cover. *F20C head- unknown miles, no damage, complete valvetrain *F20C head- Suffered damage from valves punching through to water jackets. No valvetrain. Can be repaired by specialist. *AP1 intake manifold- 90K, no injectors, comes with all other sensors and throttle body. Prices: I'd like to get 200 for each of the blocks, 350 for the complete head, best offer for the blown head, and 150 for ..."
2 years ago in For Sale
Let me know if you want to sell the rebuilt to oem head if so how much shipped
s2000 parts - heads, blocks, trannies
"Hey guys , Let me start by saying this sale is for the whole LOT ONLY. Only local pick up. Sold my race car and have NO need for these parts. That said, I know what its worth and have priced it at a good price in my opinion. I have 6 s2000 ap1 heads for sale. 1 - completely rebuilt oem spec. New valves, guides , valve job seals etc. oem springs 2- resurfaced oem spec head shaved .010 for more compression 3- rebuilt head with all new supersede valves , springs and retainers 4- rebuilt oem with new valve stem seals 5-6 good cores for rebuild. I also will include a brand new set of BC springs/retainers if my asking price is met. Block 1 - damaged fly. Walls. Good candidate for sleeves. Complete with rank rods and pistons Block 2 - damaged cly. Walls missing crank and damaged pistons. ..."
2 years ago in For Sale
I would like the vin for the car please
2000 S2000 Red - Stock - $9,000 No Trades
"CAR IS CURRENTLY IN TRANSIT, Available May 7th 9,000 NO TRADES Hey Guys, I have owned this 2000 S2000 for about 2 years. It currently has 103k miles I just got out of the military and am trying to start a business. So I must sell. The car will be located in Maine as of May 7th. It is red with very few flaws for its age. and all stock besides a set of Skunk 2 lowering springs, and a cone filter on the intake. Otherwise never modified. Runs and shifts great. The interior is all black and in great condition, AC is cold. The top is also in great condition. The vehicle was always garaged on base. Front tires have about 80% tread Cons- Rear tires are getting low, the front bumper needs a re spray. Hit an animal that made spider cracks which have slightly started to flake. Otherwise the ..."
2 years ago in Vehicles for sale
Picture of stripped trunk and driver area? what is the Vin if the car, it is no longer registered?
00 Ap1 Cheap, needs work. 8k.
"S2000 for sale, black, 136,77k. Clean title. $7,000 now. Located in, MA, Cape Cod. Moving, and i can't afford to bring this with me. Abosully sucks to sell my baby, but buying a house is a acceptable trade off.. maybe? This car is bliss and joy, I've enjoyed it, and never thought i would sell it. The good. It's a cheap s2000. The bad, front bumper needs work, has a misfire code, needs a secondary o2 welded in, etc. It drives, runs good, but does need work. I have coilpacks to put in, a resonator, new fuel injectors, etc, but no longer have access to a garage which creates a big issue of not being able to work on it. Now i'm buying my first home and someone gets a great car cheap. ohh, and the soft-top is HORRIBLE... ebay has a few for $370. Mods, 4-2-1 header 2.75 merge ..."
2 years ago in Vehicles for sale
wish this was local
FS: 2001 NFR S2000 - clean & simple jdm headlights/fresh paint/hard top/new suspensio
"2001 Honda S2000 - New Formula Red on Black Up for sale is my Honda S2000. Car has high mileage but mostly all highway miles. I drive 35+ miles each way to work and back. Car runs strong. Oil changed every 3k miles with oem filters. Car is well taken cared off. All fluids recently changed(coolant/brake/oil/diff) Price: $12,500 as is or $9,500 stock Details: 2001 New formula red Honda S2000 with 180*** miles. I get about 28-30 mpg on highway. Fresh new paint job. Clean title. Interior: 7 out of 10 - Optional sport shift knob - 05 radio door - no radio - Stock interior / no radio / soft top delete: torn top with frame/motors will come with car. Exterior: 10 out of 10 - Fresh paint job - Amuse replica R1 Front Bumper - Oem Honda Hard top - 03 JDM Oem Honda Chrome ..."
2 years ago in Vehicles for sale
I have a set of Panasport in 13's with 24.5x8x13 MH Slicks, good life left on the slicks. 400 pick up, im located in enfield ct so pretty close to where you are. i cut 1.6 60 ft all day with these at Lebanon Valley.
2 years ago in Northeast (Sales)
...
98 GS-R 80K Miles Completely Stock F/S or F/T!
"I have a 1998 GS-R for sale or for trade! Make: Acura Model: Integra GS-R 3dr Hatchback Year:1998 Color: FBP Title: Clean Miles: 80K Asking Price: $6500 Negotiable or Trade Number: 609-306-5204 text or call Location: Central NJ Security: Viper Alarm And Club Interior: 9.5 out of 10 Exterior: 8.5 out of 10/minor dings and scratches nothing serious Car is completely stock, recently had new factory exhaust installed, new brakes, new battery, wipers, tune up and oil change. Nothing wrong with the car. Dont call me or text me with stupid questions or offers! You will be ignored! Serious offers only please! Do not waste my time or yours! If anyone has a trade please PM me pics and info on your car. Please bump if viewed. Will return the favor. Keep stupid comments to yourselves! More ..."
2 years ago in Northeast (Sales)
Yeah i have a set of mh 24.5 comes with the car
Quoted from latinracerct's post
"omg that thing looks so serious... only thing that kills it for me is the no heat and the outside condition isnt exactly what i was hoping for..... deff on my list tho just because of that transplant/bay.... just curious does it come with the slicks and all lol..."
2 years ago in Northeast (Sales)
Let me know if you're interested 81mm Stock sleeve Lsvtec with wiseco piston and eagle rob Full race topmount/precision turbo 1000cc injector, xenocron tune etc supertech valve spring/itr cams koni yellow/Ground Control coilover Full interior and all b16 trans with 1-4 gsr ls 5th, quaife lsd with all synchrotech carbon synchro and new 2nd and 3rd gear. 450whp on 93 octane, car went 10.7 at 134 and 10.9 at 137. No cage so not possible to dail in at track. Should be able to ...
Quoted from latinracerct's post
"Looking for maybe another k swapped car or a clean mean built boosted b series."
2 years ago in Northeast (Sales)
Which of these guys would you guys pick to start, ppr leaugue 1pt for wr .5 for rb Brandon Jacobs Darren Sproles Torrey Smith Pick two, thanks
*OFFICIAL 2011 FANTASY FOOTBALL THREAD*
"Who's ready for Fantasy Football 2011!!!!!!!!!!!"
2 years ago in Sports
.
welded the clutch...questions
"okay so at IFO KC this past sunday i was getting ready to make my first pass and did my 3rd gear burnout and right when i finished burning out my clutch would not disengage when i pushed the pedal in. so i took it off today and the disc had welded itself to the pressure plate. now ive always done 2nd ear burnouts but i tried a 3rd gear burnout in front of my house before IFO and it worked much better than 2nd gear so i thought id give it a shot at the track and this is what happened. i guess ill be sticking to 2nd gear burnouts from now on. since im running a CG trans, im using a 92-00 civic ACTION pressure plate with a 86-89 accord/prelude (a20 engine) clutchnet disc. i cant afford to buy a whole new clutch right now.. the pressure plate is 6 years old but i believe is still in good ..."
2 years ago in Drag Racing
What is included in the 83mm block?
NY: HUGE Part Out 700+whp Benson GSR/RLZ/Garrett/TIAL/Skunk2/ID1000/Quaife/Synapse
"Im getting out of the Honda scene and am completly parting out everything. This setup made 717whp 500ft/lb at 31psi. Any part listed here I can have shipped out in 1 day. Buyer pays shipping + 3% paypal fees. 1999 EM1 B16 RLZ Race Head, CNC ported, +1mm intake, Ferrea Valves, Supertech 85lb springs+retainers, 83mm chambers (700miles) -$1700obo Synapse Turbo T4 Twinscroll Top mount Manifold, 3in downpipe w/ flex section, Dual Black Tial 38mm wastegates, dumptubes, Forced Performance HTA86 Turbo , Divided 1.06 hotside, Coolant and oil lines included-$3500 GSR/Syncrotech Syncros 1-5/Quaife LSD Tranny(200miles) -$1200 SOLD 83mm Benson GSR bare Block -$1000 CC Twin disc (700miles)-$900 SOLD Crane ps92 coil, m&w Pro10, dizzy, MSD external cap, Harness-$550 SOLD Hondata S300 w/ boost ..."

About Me

  • About StolenTeg
    Location
    CT
  • Signature
  • wanD siLva

    Statistics

    Total Posts
    General Information
    • Last Activity: 04-27-2014 06:18 AM
    • Join Date: 01-07-2004
    • Referrals: 0

    Garage

    StolenTeg has no vehicles in the garage


    All times are GMT -8. The time now is 11:30 PM.



    2008 Copyright, InternetBrands Inc.
    Powered by vBulletin® Version 3.7.4
    Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.

    Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for Honda-Tech.com content, comments, or advertising. Honda-Tech.com is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Honda-Tech.com in any way. Copyright/trademark/sales mark infringements are not intended or implied.
    Emails & Contact Details