diy h4 bi-xenon harness
#1
Junior Member
Thread Starter
Join Date: Oct 2002
Location: 510, CA
Posts: 972
Likes: 0
Received 0 Likes
on
0 Posts
diy h4 bi-xenon harness
can anyone point me in the right direction on how to make my own bi-xenon harness?
or can i reuse the harness that came with a pnp kit that was handed down to me?
this is for a 99 civic
or can i reuse the harness that came with a pnp kit that was handed down to me?
this is for a 99 civic
#4
Junior Member
Thread Starter
Join Date: Oct 2002
Location: 510, CA
Posts: 972
Likes: 0
Received 0 Likes
on
0 Posts
Re: diy h4 bi-xenon harness (DrivenMC)
I'll take a picture of the harness that I have at home tonight.
My setup so far is:
FX35 projector
Matsushita ballast
Philips OEM HID bulbs
My setup so far is:
FX35 projector
Matsushita ballast
Philips OEM HID bulbs
#7
Banned
Join Date: May 2008
Location: Ormond Beach, Florida, USA
Posts: 86
Likes: 0
Received 1 Like
on
1 Post
Re: diy h4 bi-xenon harness (striker_18)
striker_18 is right most diagrams are universal, if you don't have a diagram than i'll be able to tell you which wire goes where. Get me some type of picture so ill be able to help!
Trending Topics
#8
Honda-Tech Member
Join Date: Nov 2005
Location: montreal, que, canada
Posts: 579
Likes: 0
Received 0 Likes
on
0 Posts
Re: diy h4 bi-xenon harness (DrivenMC)
it was like a 20 minute job for me to make my own H4 adapter harness when i installed TYC projectors on my 97 civic.
The stock plug was for a single 9003 bulb and the TYC required a two bulb systems.
Works great and kept the DRL
The stock plug was for a single 9003 bulb and the TYC required a two bulb systems.
Works great and kept the DRL
Thread
Thread Starter
Forum
Replies
Last Post