RB powered S2000
#1
Thread Starter
Join Date: Feb 2004
Location: Costa Mesa, Ca, United States
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
RB powered S2000
Hey I was just wondering. Is it possible to implant an RB26 motor from a R34 into an Ap1?
I was in aim chats and saw a guys sn that peeked my interest. RB something. Anyways his specs are as follows, is it possible?
"2001 Honda S2000
Exterior:
-IS300/Dodge Ram Charcoal Grey
-Carbon Fiber Vaka-Mon Sticker
-Advan Carbon Fiber Sports Decal
-Mugen Hardtop
-Cwest body kit/With Custom P-Urethane front Mugen SS Bumper
-Cwest mirrors
-J's Racing CF Hood
-Signal GT Wing
-Red Under Chassis Light kit, with custom braking only wiring. Rewired so it only turns on when head lights are on.
Eninge:
-Custom Engine mounts
-Custom Wiring Harness
-Custom Remapped and performance chipped ECU
-2.6L DOHC I-6RB26DET(Nissan)
-HKS2.8L kit
-Toda camshafts,valvesprings
-Tomei retainers
-Signal ported and polished Heads
-Trust T88-34D turbocharger
-Stainless steel exhaust manifold
-High-flow Type C wastegate & Intercooler
-Profec-B boost controller,Oil Pan,and Head gasket
-Sard Regulator & 1,000cc injectors
-Signal Oil Catch can and Aluminum Radiator
-HKS F-con V pro
-2 Bosch fuel pumps
-KAAZ limited-slip differential
-Exedy Triple Plate clutch
-Nitrous Express EFI Dual Stage, with 15Ib Bottle set for 250hp+ Jumps
-Custom Tranmission mounts and extra hardware.
Interior:
-Bride Brix II (Red)No passanger seat, Entertainment housing
-Pair of Takata 4 Point Harness's
-Advan Sports Steering Wheel
-Sparco Detachable Steering Hub
-Greddy RedGunmetal 6 speed shift ****
-Cusco 6 point rollcage
Suspension:
-Comptech Front Upper Strut Bar
-Comptech Rear Lower Tie Bar
-Comptech Adjustable Sport Springs
-Tein Adjustable Shock Kit
-Cut and altered chassis, clearance was needed for RB, reenforced and car sits a little heavy with the extra material that went into supporting from underneath chassis.
Rolling:
-Custom Volk Racing Ce-28n, 18x7.5 225/40/Front, 19x9 255/35/Rear
-Spoon 4 piston brake calipers
-14.7inch Rotors from IRotors
-Stainless Double corded brake lines
ICE:
-2.1Ghz Apple G5 Desktop with custom CF case
-Touch Pad Mouse Key board with CF casing
-Monitor Mount
-20 inche Apple Display with custom Carbon Fiber Housing
-Full Panasonic speaker replacements
-Car was former floor project at UTI"
I was in aim chats and saw a guys sn that peeked my interest. RB something. Anyways his specs are as follows, is it possible?
"2001 Honda S2000
Exterior:
-IS300/Dodge Ram Charcoal Grey
-Carbon Fiber Vaka-Mon Sticker
-Advan Carbon Fiber Sports Decal
-Mugen Hardtop
-Cwest body kit/With Custom P-Urethane front Mugen SS Bumper
-Cwest mirrors
-J's Racing CF Hood
-Signal GT Wing
-Red Under Chassis Light kit, with custom braking only wiring. Rewired so it only turns on when head lights are on.
Eninge:
-Custom Engine mounts
-Custom Wiring Harness
-Custom Remapped and performance chipped ECU
-2.6L DOHC I-6RB26DET(Nissan)
-HKS2.8L kit
-Toda camshafts,valvesprings
-Tomei retainers
-Signal ported and polished Heads
-Trust T88-34D turbocharger
-Stainless steel exhaust manifold
-High-flow Type C wastegate & Intercooler
-Profec-B boost controller,Oil Pan,and Head gasket
-Sard Regulator & 1,000cc injectors
-Signal Oil Catch can and Aluminum Radiator
-HKS F-con V pro
-2 Bosch fuel pumps
-KAAZ limited-slip differential
-Exedy Triple Plate clutch
-Nitrous Express EFI Dual Stage, with 15Ib Bottle set for 250hp+ Jumps
-Custom Tranmission mounts and extra hardware.
Interior:
-Bride Brix II (Red)No passanger seat, Entertainment housing
-Pair of Takata 4 Point Harness's
-Advan Sports Steering Wheel
-Sparco Detachable Steering Hub
-Greddy RedGunmetal 6 speed shift ****
-Cusco 6 point rollcage
Suspension:
-Comptech Front Upper Strut Bar
-Comptech Rear Lower Tie Bar
-Comptech Adjustable Sport Springs
-Tein Adjustable Shock Kit
-Cut and altered chassis, clearance was needed for RB, reenforced and car sits a little heavy with the extra material that went into supporting from underneath chassis.
Rolling:
-Custom Volk Racing Ce-28n, 18x7.5 225/40/Front, 19x9 255/35/Rear
-Spoon 4 piston brake calipers
-14.7inch Rotors from IRotors
-Stainless Double corded brake lines
ICE:
-2.1Ghz Apple G5 Desktop with custom CF case
-Touch Pad Mouse Key board with CF casing
-Monitor Mount
-20 inche Apple Display with custom Carbon Fiber Housing
-Full Panasonic speaker replacements
-Car was former floor project at UTI"
#2
Thread Starter
Join Date: Feb 2004
Location: Costa Mesa, Ca, United States
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
Re: RB powered S2000 (OniAznAngel)
Exactly my thoughts. Cause why would someone post that in their info on aim? yah know? Just copied off and posted here to get some opinions.
But yah exactly my thoughts Super twinz.
But yah exactly my thoughts Super twinz.
#3
Re: RB powered S2000 (OniAznAngel)
ummm no...i mean it would be possible with the right amount of time and money but why would you do it!? with all of what he says im thinkin bs...hes prolly some 15 year old kid that came up with a dream list of items to put into a car...where would you put a 20in moniter in an s2000!? NO WHERE! IT DOESNT HAPPEN!
Thread
Thread Starter
Forum
Replies
Last Post