eg6 water in floor board.
09-01-2009, 11:39 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Aug 2009
Location: Northwest, Ga
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
eg6 water in floor board.
I have si hatch w/ h22a and water has leaked onto my floor boards a couple of times. The 1st time it was raining and i was running the defog and about 20 mins later my girlfriends feet were soaked, then the next morning the driver side was soaked, then a month later the driver side was wet again and i didnt run anything. I here it could be the heater core. Opinions?
09-02-2009, 05:58 PM
#4
Honda-Tech Member
Join Date: May 2008
Location: fake titty city
Posts: 200
Likes: 0
Received 0 Likes
on
0 Posts
Re: eg6 water in floor board.
to my understanding there is a rubber plug under the wiper cowl that goes bad and leaks, I had a similar problem with my DA back in the day... was an easy fix, try a search... maybe there is a thread on it, I found a thread on the G2ic fourms, but I am sure tegs are not the only one with the problem.
Thread
Thread Starter
Forum
Replies
Last Post
PatrickGSR94
Acura Integra
25
01-30-2005 02:38 PM
