Tyson Ballou

A few months ago, i believe there was a prototype bracket in which to retain A/C in a 96 up civic doing a h22 swap, i am wondering if the bracket to retain power steering, or if there are any homemade methods to do it? Thank you all in advance.

poison

A/C bracket came out and is sold from HCP.

You can purchase them from Newman and H22EK.

as for the Power steering, it will not fit, unless you use a very tiny pump.

The line won't clear between the valve cover and the driver side strut housing, as well as you'd have hood clearance problems with the power steering pump.

Newman

Yes, HCP has an AC bracket available. You might have to relocate condensor fan to the front, but just as long as any fan is used on either side of the condensor, it works perfectly... plus it's well worth it when you have cold AC blowing

Poison pretty much summed it up for the PS part.

Jonathan_ED3

newman,

About the A/C condensor fan...should I go ahead and ge a slim fan and put it in front and wire it as a pusher?

Jonathan_ED3

oh, and also...do you have any pics of it from a different angle?

H22AMedina

I have one of Newman's AC brackets for sale, I didn't use it at all, so please take it off my hands.

Tyson Ballou

Thanks for all those that replied! The bracket looks nice! ... as for the PS pump, what type of tiny pump do u propose i use? any ideas.... thanks

poison

I would suggest the Accord or try working with the Prelude one.