B swap into vx - wish me luck
#28
Honda-Tech Member
Thread Starter
Join Date: Jun 2000
Location: Seattle Area
Posts: 517
Likes: 0
Received 0 Likes
on
0 Posts
Re: B swap into vx - wish me luck (johng)
full bleed just to check existing - nothing
swapped front calipers, full bleed - nothing
next steps are swapping out for a 15/16" and a 4040 valve.
hopefully that resolves
swapped front calipers, full bleed - nothing
next steps are swapping out for a 15/16" and a 4040 valve.
hopefully that resolves
#31
Honda-Tech Member
Thread Starter
Join Date: Jun 2000
Location: Seattle Area
Posts: 517
Likes: 0
Received 0 Likes
on
0 Posts
Re: B swap into vx - wish me luck (spanish-ek'hatch)
started school again and work picked up
I have an integra 15/16 booster/master cylinder and a 93 Civic Si proportioning value to install. Update once I get them in (probably this weekend).
Also, car wont rev past ~5800!
I have an integra 15/16 booster/master cylinder and a 93 Civic Si proportioning value to install. Update once I get them in (probably this weekend).
Also, car wont rev past ~5800!
#32
Honda-Tech Member
Thread Starter
Join Date: Jun 2000
Location: Seattle Area
Posts: 517
Likes: 0
Received 0 Likes
on
0 Posts
Re: B swap into vx - wish me luck (killingtime)
Update:
Picked up a base map ECU from C-Speed (thanks Crescent!)
Installed a 15/16" MC and 3040 valve (not in the pic), have brakes now, needs another bleed.
After the camber kits and random bits, should be ready to sort out a cage.
Edit: damn, the underside of the hood is filthy!
Picked up a base map ECU from C-Speed (thanks Crescent!)
Installed a 15/16" MC and 3040 valve (not in the pic), have brakes now, needs another bleed.
After the camber kits and random bits, should be ready to sort out a cage.
Edit: damn, the underside of the hood is filthy!
Thread
Thread Starter
Forum
Replies
Last Post
spyderracing
Honda Civic / Del Sol (1992 - 2000)
35
08-29-2004 08:52 PM