94-up B18b into 90 EF,,, a few Q's
06-09-2003, 09:31 AM
#1
Thread Starter
Join Date: Jan 2002
Location: berwyn, il, usa
Posts: 428
Likes: 0
Received 0 Likes
on
0 Posts
94-up B18b into 90 EF,,, a few Q's
I know what i need to bomb a GSR engine into my 90 HB Si, but if money becomes an issue i will be forced to get a LS engine, and i will only run a 94-up LS engine. IM going to use the 94-up trans, i have a guy that can fab the mount, and i will swap in the hydro pedal/system.
The questions
--What wiring harness? i know hasport doesnt really have anything for it.
--What ECU will i use for the wiring harness i need?
--What distributor will i use?
--Anything else that i didnt mention that is a factor in this swap?
I know what mounts, axles, shift linkage to get, its the electrical that im unsure of. I know what injectors, but that depends on what wiring harness i use.
Thanks to all that help me out with this!
The questions
--What wiring harness? i know hasport doesnt really have anything for it.
--What ECU will i use for the wiring harness i need?
--What distributor will i use?
--Anything else that i didnt mention that is a factor in this swap?
I know what mounts, axles, shift linkage to get, its the electrical that im unsure of. I know what injectors, but that depends on what wiring harness i use.
Thanks to all that help me out with this!
06-09-2003, 10:01 AM
#2
Trial User
Join Date: Jun 2000
Location: North Vancouver, BC
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
the si harness should be fine
90-91 pr4 integra ecu attaches to the si harness without problems
if using the si harness a non obd distributor should be fine.
90-91 pr4 integra ecu attaches to the si harness without problems
if using the si harness a non obd distributor should be fine.
06-11-2003, 08:49 AM
#3
Honda-Tech Member
Join Date: Apr 2002
Location: Hayward, CA 94541, USA
Posts: 4,281
Likes: 0
Received 1 Like
on
1 Post
Re: (Mazmay)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mazmay »</TD></TR><TR><TD CLASS="quote">the si harness should be fine
90-91 pr4 integra ecu attaches to the si harness without problems
if using the si harness a non obd distributor should be fine.</TD></TR></TABLE>
What he said...I had a 97 ls running non-obd, pr4 ecu, and a DX to SiR wiring harness from hasport. (SiR because I would run vtec at a later time). I used an older B16 cable tranny also...
90-91 pr4 integra ecu attaches to the si harness without problems
if using the si harness a non obd distributor should be fine.</TD></TR></TABLE>
What he said...I had a 97 ls running non-obd, pr4 ecu, and a DX to SiR wiring harness from hasport. (SiR because I would run vtec at a later time). I used an older B16 cable tranny also...
06-15-2003, 08:15 PM
#4
Thread Starter
Join Date: Jan 2002
Location: berwyn, il, usa
Posts: 428
Likes: 0
Received 0 Likes
on
0 Posts
Re: (EF_LSVtec)
What Distributor do i use? i know non oBD or OBD0 (same thing), but from what car? 90-93 integra LS? Will the plugs on the dizzy plug into my SI harness with no problems? thanks .
06-16-2003, 08:43 AM
#6
Honda-Tech Member
Re: (JDM CRX)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDM CRX »</TD></TR><TR><TD CLASS="quote">What Distributor do i use?</TD></TR></TABLE>
The one that you are going to find the most in 90-91 integra (OBD0)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDM CRX »</TD></TR><TR><TD CLASS="quote">i know non oBD or OBD0 (same thing), but from what car? 90-93 integra LS?</TD></TR></TABLE>
Only 90-91 (for integra), 92- 93 integras are OBD1
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDM CRX »</TD></TR><TR><TD CLASS="quote">Will the plugs on the dizzy plug into my SI harness with no problems? thanks .</TD></TR></TABLE>
They should if you get the right dizzy
The one that you are going to find the most in 90-91 integra (OBD0)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDM CRX »</TD></TR><TR><TD CLASS="quote">i know non oBD or OBD0 (same thing), but from what car? 90-93 integra LS?</TD></TR></TABLE>
Only 90-91 (for integra), 92- 93 integras are OBD1
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDM CRX »</TD></TR><TR><TD CLASS="quote">Will the plugs on the dizzy plug into my SI harness with no problems? thanks .</TD></TR></TABLE>
They should if you get the right dizzy
Thread
Thread Starter
Forum
Replies
Last Post