wheel spacers Front?
05-22-2007, 05:55 PM
#1
Honda-Tech Member
Thread Starter
wheel spacers Front?
Ive only been able to find spacers for the rear... i really cant undertsand why it would be a different part but im told it is, and i havent been able to find any spacers for the front?
anybody know anything i could really use a nice 25 mm more up there... thanks in advance
anybody know anything i could really use a nice 25 mm more up there... thanks in advance
05-22-2007, 06:55 PM
#3
Honda-Tech Member
Re: wheel spacers Front? (tegsallgood)
I've always used Crow Automotive's spacers. Call them up and tell them the car.
http://crowautomotive.com/
http://crowautomotive.com/
05-22-2007, 09:14 PM
#4
Honda-Tech Member
Thread Starter
Re: wheel spacers Front? (S@nt0s)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by S@nt0s »</TD></TR><TR><TD CLASS="quote">u want to use a 25mm spacer up front????? </TD></TR></TABLE>
haha yeah i mean it looks like thats about what i need (ap2 rims). i want it pretty aggressive. think its overkill?
haha yeah i mean it looks like thats about what i need (ap2 rims). i want it pretty aggressive. think its overkill?
05-22-2007, 09:18 PM
#5
Honda-Tech Member
Thread Starter
Re: wheel spacers Front? (Sean Juan)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Sean Juan »</TD></TR><TR><TD CLASS="quote">I've always used Crow Automotive's spacers. Call them up and tell them the car.
http://crowautomotive.com/</TD></TR></TABLE>
looks good ill give them a call tomorrow.. maybe ill do 10 rear 20 front
http://crowautomotive.com/</TD></TR></TABLE>
looks good ill give them a call tomorrow.. maybe ill do 10 rear 20 front
05-23-2007, 06:05 AM
#6
Munkyw3rkz.webs.com
Join Date: Jun 2003
Location: PUTTIN UR MOUTH ON CURBZ CPT, SoCal
Posts: 22,166
Likes: 0
Received 1 Like
on
1 Post
Re: wheel spacers Front? (tegsallgood)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tegsallgood »</TD></TR><TR><TD CLASS="quote">
haha yeah i mean it looks like thats about what i need (ap2 rims). i want it pretty aggressive. think its overkill?</TD></TR></TABLE>
im still lost... you want to put +25mm spacers on AP2 wheels?
haha yeah i mean it looks like thats about what i need (ap2 rims). i want it pretty aggressive. think its overkill?</TD></TR></TABLE>
im still lost... you want to put +25mm spacers on AP2 wheels?
05-23-2007, 06:36 AM
#7
Honda-Tech Member
Thread Starter
Re: wheel spacers Front? (S@nt0s)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by S@nt0s »</TD></TR><TR><TD CLASS="quote">
im still lost... you want to put +25mm spacers on AP2 wheels?</TD></TR></TABLE>
well probably 20 mm lol... is that too aggressive? i donno ive never used spacers but from what im seeing that looks alright.. their camber is in the green and they are just so far in... i dont really wanna cop new wheels right now but i want an aggressive offset.
im still lost... you want to put +25mm spacers on AP2 wheels?</TD></TR></TABLE>
well probably 20 mm lol... is that too aggressive? i donno ive never used spacers but from what im seeing that looks alright.. their camber is in the green and they are just so far in... i dont really wanna cop new wheels right now but i want an aggressive offset.
Trending Topics
05-23-2007, 06:59 AM
#10
Honda-Tech Member
Thread Starter
Re: wheel spacers Front? (tegsallgood)
wow 110 for 1? chill lol ill put that towards the wheels expletive it. haha i figured a teeny circular piece of metal would be cheaper! ima call crow and see what their prices are like for custom ones.. if theyre crazy im just gonna wait for the wheels... i just need that offset!!!!
05-23-2007, 07:53 AM
#12
Honda-Tech Member
Thread Starter
Re: wheel spacers Front? (S@nt0s)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by S@nt0s »</TD></TR><TR><TD CLASS="quote">whatever you do ensure they are hubcentric</TD></TR></TABLE>
word
word
05-23-2007, 08:25 AM
#14
Honda-Tech Member
Join Date: Apr 2002
Location: snap.snip.bit., CA
Posts: 5,207
Likes: 0
Received 0 Likes
on
0 Posts
Re: wheel spacers Front? (S@nt0s)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by S@nt0s »</TD></TR><TR><TD CLASS="quote">i just feel thats too much esspecially just for stock rims, your gonna need extended studs...</TD></TR></TABLE>
^x2
just order some rims with the offset you want.
^x2
just order some rims with the offset you want.
05-23-2007, 12:43 PM
#15
Honda-Tech Member
Thread Starter
Re: wheel spacers Front? (SilverDc2)
yeah well i was gonna get the studs regardless.... the only reason i didnt wanna get new wheels is cuz i have brand new tires on the rear and i honestly like how the ap2 rims look when theyre clean... maaaad polished. anyway i donno ill figure it out end thread lol
05-23-2007, 02:59 PM
#17
Junior Member
Join Date: Feb 2006
Location: CA
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
Re: wheel spacers Front? (tegsallgood)
25mm is almost a whole inch. I'm not seeing much room for the wheel to go out an inch without some sort of rubbing. Are you lowered at all? Have you modified your fenders?
05-23-2007, 04:23 PM
#18
Honda-Tech Member
Thread Starter
Re: wheel spacers Front? (Project22a)
no but the tires are fairly stretched... if its needed then ill roll them, i doubt i will i have slight neg camber. from what i measured i should be safe with 25 so i was gonna do 20 to be safe and 10 in the back the back barely needs it... i just wana have the most aggressive sitting stockies in the world.. cause thr wheels beautiful, and i got 245s in the back and im more than happy with that... sone nice extended studs with some open lugs should finish the wheels off nicely...
05-23-2007, 04:52 PM
#19
Honda-Tech Member
Join Date: Jan 2005
Location: never never land
Posts: 5,997
Likes: 0
Received 0 Likes
on
0 Posts
Re: wheel spacers Front? (tegsallgood)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tegsallgood »</TD></TR><TR><TD CLASS="quote">
anybody know anything i could really use a nice 25 mm more up there... thanks in advance </TD></TR></TABLE>
OEM offset in the front is a +55, so if you space it out 25mm more, your looking at a +30 front. thats pretty low, exspecially for OEM fenders. Lowest ive seen on a stock s2000 was +35 spoons.
anybody know anything i could really use a nice 25 mm more up there... thanks in advance
</TD></TR></TABLE>OEM offset in the front is a +55, so if you space it out 25mm more, your looking at a +30 front. thats pretty low, exspecially for OEM fenders. Lowest ive seen on a stock s2000 was +35 spoons.
05-23-2007, 05:48 PM
#21
Honda-Tech Member
Thread Starter
Re: wheel spacers Front? (Francesco)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Francesco »</TD></TR><TR><TD CLASS="quote">oh yeah, I forgot to add, start looking into extended wheel studs and open end lug nuts </TD></TR></TABLE>
i have, i said i was plannign on that... and about the 30 mm offset, u gotta remember how thin the stockies are in the front.. and once again, i doubt i do 25... i was thinking more along the lines of 20... i donno forget it- i doubt i do it anyway!
</TD></TR></TABLE>i have, i said i was plannign on that... and about the 30 mm offset, u gotta remember how thin the stockies are in the front.. and once again, i doubt i do 25... i was thinking more along the lines of 20... i donno forget it- i doubt i do it anyway!
05-26-2007, 08:07 PM
#23
Honda-Tech Member
Thread Starter
Re: wheel spacers Front? (evil vapor)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by evil vapor »</TD></TR><TR><TD CLASS="quote">pm sent</TD></TR></TABLE>
i didnt get a PM homie
i didnt get a PM homie
05-26-2007, 10:37 PM
#24
Honda-Tech Member
Join Date: Jan 2005
Location: never never land
Posts: 5,997
Likes: 0
Received 0 Likes
on
0 Posts
Re: wheel spacers Front? (tegsallgood)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tegsallgood »</TD></TR><TR><TD CLASS="quote">
i have, i said i was plannign on that... and about the 30 mm offset, u gotta remember how thin the stockies are in the front.. and once again, i doubt i do 25... i was thinking more along the lines of 20... i donno forget it- i doubt i do it anyway!</TD></TR></TABLE>
your crazy man. i wouldnt run anything beyond a 15mm spacer on the s2000.
after 15mm, it just pays to buy new rims with a +40 offset.
i have, i said i was plannign on that... and about the 30 mm offset, u gotta remember how thin the stockies are in the front.. and once again, i doubt i do 25... i was thinking more along the lines of 20... i donno forget it- i doubt i do it anyway!</TD></TR></TABLE>
your crazy man. i wouldnt run anything beyond a 15mm spacer on the s2000.
after 15mm, it just pays to buy new rims with a +40 offset.
05-27-2007, 06:16 AM
#25
Honda-Tech Member
Thread Starter
Re: wheel spacers Front? (Francesco)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Francesco »</TD></TR><TR><TD CLASS="quote">
your crazy man. i wouldnt run anything beyond a 15mm spacer on the s2000.
after 15mm, it just pays to buy new rims with a +40 offset.</TD></TR></TABLE>
crazy i am, thats for sure... yeah im just gonna do the wheels then. this s2k is a never ending money pit!!!
your crazy man. i wouldnt run anything beyond a 15mm spacer on the s2000.
after 15mm, it just pays to buy new rims with a +40 offset.</TD></TR></TABLE>
crazy i am, thats for sure... yeah im just gonna do the wheels then. this s2k is a never ending money pit!!!