KingS2000

Well I just bought my dream car Honda s2000 bad bitch. After about a month now this thing pulls nice for a stock s2000 but I always knew Once you boost there's no coming back. N/a Sucks lol.

Most Don't Know but boost is a drug:bigeyes:

My goal is 400 hp

Well as I get in the Stuff I will post pics and stuff

Well Be running

Hondata Flashpro
T1 Id 1000cc Injectors
Walbro 255lph
Garrett 60-1 Turbo
Turbo Blanket
ODYSSEY PC680
Tial 38mm Wastegate
Pfab Manifold and Purcell Dp
PurCell Intercooler N Piping Kit
Tial 50mm Bov
Fast-turbo-Return and Feed
Plx WideBand
Plx Oil Pressure Gauge

All Fab work done by Purcell Performance

















[SIZE=7][SIZE=7][COLOR=blue]

Before Boost
Ueat1023 My AP2 Stock/Flashpro Run

Watch In hd 1080p

KingS2000

I have all the parts needed will post install pics on the July 17th when the Madness Starts...

Hoping for the following week Mase Tuned

Vi3tboy

sweet! Keep this thread updated!

KingS2000

Well today is the day will start putting her together shortly....

Wish us good look.

Will post lots of pics

KingS2000

here you go

KingS2000

Bump if you Viewed

pwrofdrm

Is that intercooler piping steel? Must be heavy!

Also, from the looks of that, you have the crank case evacuation vacuum line going back into the intake pipe (in this case the charge pipe) as it would on a stock S2000. You're going to be introducing your valvetrain to positive manifold pressure with that route, not vacuum like it was designed for. Bottom line, get that thing outta there before you boost that car!

pwrofdrm

You don't need to run the crank case tube anywhere...most people don't. Just leave it off all together.

Here's a pic for example, not my car:

dagle

iTrader: (1)

that **** smokes up after a few WOT pulls dont it? i'd rather run the catchcan/breathertank after i had my cabin fill with smoke after i obliterated a 350z who cut me off back then.

KingS2000

There getting vacuum from the top of the fuel regulator vacuum where there is a nipple from intake manifold the AP2 06+ Doesn't have that nipple because there's no Return System.

KingS2000

Well there's no smoke when ****'s done right no offense!!

Sorryy!

dagle

iTrader: (1)

what comes out of that crank case tube then? I thought it recirculated the dead crankcase air back into the intake to help emissions

lucky13AP2

Hmm this makes me want/not want boost. Silas. Got pix of your old setup?

dagle

iTrader: (1)

sure do, shoot me a PM on barf. it was just a cookie cutter setup from ILP, if they can't do it right, not sure how many shops can.

camoy

Why do you need this?

As for what pwrofdrm is talking about I have circled in your picture. In your picture it looks like you have a tube running from the charge pipe back into the valve cover. This is not good as now your crankcase will see boost pressure just like your intake manifold. The largest problem that positive crankcase pressure is going to cause you, is oil will no longer correctly drain back into your pan. No oil in pan no oil for pump to pump through your block, no oil in block is bad. Again I am not sure if this is the case but it looks that way in your picture hard to tell though since the picture is fuzzy:



So if this line is indeed hooked up from your charge pipe and now piped into your valve cover undo it. Also why you are at it I recommend getting rid of the other one from your intake mani going to your PCV valve as it is just a matter of time before your PCV valve gives up and starts to allow boost into your valve cover.

Before you blast people about doing it right make sure you hear them out and know for sure you have it right. See the picture of the SS

KingS2000

There's nothing going into the chargepipe is just hanging there.

I think I will run a catchcan 1 from pvc to catch and the other 1 that is hanging, and keep my vacuum source from intake manifold.

Jimster480

pretty nice setup u have there. I want a S2K :/