2jz Ap1
#1
Thread Starter
Join Date: Jun 2004
Location: Up yours, stfu, good job
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
2jz Ap1
Hey Guys! Back again to ask another question. Awhile back on a site called online show off there was a guy with a blk s2k. And he said he got it on salvage and had to rebuild. Long story short, all custom work. He Swapped a 2jz into that sucker. I thought the 2jz was too big? Ionno...asking for opinions and pics if anyone has them. He removed his account after mass questiosn posted on his account for walk through and more pics...
Can someone tell me if this is easily done? Cause I am going to Wyotech at the end of this New Yr June05. And I am looking to go with a 93 hb civic. But if this is possible, then Id like to try to buy a rolling chassis s2k...in need of rebuild as my project car. Id like to try something doable at the same time challenging cause I think if it IS possible, Id like to try. Plz dont flame me I just really really wanna know. Cause the guy disappeared and I havent seen his account again.
On OS his name WAS 01Ap12jz. Plz some in insight would be appreciated...
What other hybrid cars are out there in the Honda world sides and LEAVING out b and h series swapped cars. K series used in anything unique? etc?
Thx guys so much for reading help is appreciated.
Can someone tell me if this is easily done? Cause I am going to Wyotech at the end of this New Yr June05. And I am looking to go with a 93 hb civic. But if this is possible, then Id like to try to buy a rolling chassis s2k...in need of rebuild as my project car. Id like to try something doable at the same time challenging cause I think if it IS possible, Id like to try. Plz dont flame me I just really really wanna know. Cause the guy disappeared and I havent seen his account again.
On OS his name WAS 01Ap12jz. Plz some in insight would be appreciated...
What other hybrid cars are out there in the Honda world sides and LEAVING out b and h series swapped cars. K series used in anything unique? etc?
Thx guys so much for reading help is appreciated.
#2
Member
Join Date: Aug 2001
Location: Starbucks Most, Likely
Posts: 5,664
Likes: 0
Received 0 Likes
on
0 Posts
Re: 2jz Ap1 (MasterGradeChik)
Sounds fishy. He probably revoked his account because he couldnt explain himself. Either way, it isnt an easy swap if it is even possible.
#3
Honda-Tech Member
Join Date: Oct 2002
Location: Hell, Az, USA
Posts: 954
Likes: 0
Received 0 Likes
on
0 Posts
Re: 2jz Ap1 (MasterGradeChik)
Go search for the post of the 510 with a S2K motor in it. VERY NICE
Fairly easy swap (at least it looks like it), but custom works needs to be done.
Fairly easy swap (at least it looks like it), but custom works needs to be done.
#5
Honda-Tech Member
Re: 2jz Ap1 (beandip)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by beandip »</TD></TR><TR><TD CLASS="quote">Go search for the post of the 510 with a S2K motor in it. VERY NICE
Fairly easy swap (at least it looks like it), but custom works needs to be done.</TD></TR></TABLE>
Seems like everyone uses the 510 for swaps anymore. Atleast in the past year or so. I've seen newer rotary engines swapped all the sway up to SR20DETs and RB25 and RB26 engines. Yippey
Fairly easy swap (at least it looks like it), but custom works needs to be done.</TD></TR></TABLE>
Seems like everyone uses the 510 for swaps anymore. Atleast in the past year or so. I've seen newer rotary engines swapped all the sway up to SR20DETs and RB25 and RB26 engines. Yippey
#6
Re: 2jz Ap1 (MasterGradeChik)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by MasterGradeChik »</TD></TR><TR><TD CLASS="quote">Hey Guys! Back again to ask another question. Awhile back on a site called online show off there was a guy with a blk s2k. And he said he got it on salvage and had to rebuild. Long story short, all custom work. He Swapped a 2jz into that sucker. I thought the 2jz was too big? Ionno...asking for opinions and pics if anyone has them. He removed his account after mass questiosn posted on his account for walk through and more pics...
Can someone tell me if this is easily done? Cause I am going to Wyotech at the end of this New Yr June05. And I am looking to go with a 93 hb civic. But if this is possible, then Id like to try to buy a rolling chassis s2k...in need of rebuild as my project car. Id like to try something doable at the same time challenging cause I think if it IS possible, Id like to try. Plz dont flame me I just really really wanna know. Cause the guy disappeared and I havent seen his account again.
On OS his name WAS 01Ap12jz. Plz some in insight would be appreciated...
What other hybrid cars are out there in the Honda world sides and LEAVING out b and h series swapped cars. K series used in anything unique? etc?
Thx guys so much for reading help is appreciated.</TD></TR></TABLE>
go for it. it can be done. Budget at least 5k for fabrication to get whatever you want to fit in there + the cost of whatever is being swapped.
Can someone tell me if this is easily done? Cause I am going to Wyotech at the end of this New Yr June05. And I am looking to go with a 93 hb civic. But if this is possible, then Id like to try to buy a rolling chassis s2k...in need of rebuild as my project car. Id like to try something doable at the same time challenging cause I think if it IS possible, Id like to try. Plz dont flame me I just really really wanna know. Cause the guy disappeared and I havent seen his account again.
On OS his name WAS 01Ap12jz. Plz some in insight would be appreciated...
What other hybrid cars are out there in the Honda world sides and LEAVING out b and h series swapped cars. K series used in anything unique? etc?
Thx guys so much for reading help is appreciated.</TD></TR></TABLE>
go for it. it can be done. Budget at least 5k for fabrication to get whatever you want to fit in there + the cost of whatever is being swapped.
#7
Thread Starter
Join Date: Jun 2004
Location: Up yours, stfu, good job
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
Re: 2jz Ap1 (vapor)
i will do the work when i go to wyotech i wanted it as a possible idea over bringing a hatch over there...i just wandered if anyone else has done it...cause im affraid to do it blindly...and i cant seem to find that guy anywhere on the net. so kind of lost hope. though it would be nice to feel that i6 power in the s2k...
thx for everyones help...
thx for everyones help...
Trending Topics
#8
Honda-Tech Member
Join Date: Nov 2001
Location: WA, US
Posts: 457
Likes: 0
Received 0 Likes
on
0 Posts
Re: 2jz Ap1 (MasterGradeChik)
I've never heard of the guy you are referring to. Technically, just about anything can be done as long as you have the funds. If you can physically fit the dimensions of the motor into the casing / frame of the S2000, then with enough money, you can get it to work.
How the car will drive, or if it will be street legal, or even safe to drive is altogether a different story. IMHO, a car worked on like this is more of a novelty. I would much rather get in my own S2000, fire up 2 liters of Japan's finest, and motor.
How the car will drive, or if it will be street legal, or even safe to drive is altogether a different story. IMHO, a car worked on like this is more of a novelty. I would much rather get in my own S2000, fire up 2 liters of Japan's finest, and motor.
Thread
Thread Starter
Forum
Replies
Last Post
cjames235
Welding / Fabrication
24
04-19-2005 10:53 AM
Jason kiDD
Honda Accord (1990 - 2002)
36
04-15-2002 08:53 AM