iconicpower

if you are looking for cheap but big difference in your s2k then you need to read TURBO mags tech article about a crazy f20 2.4L stroker kit. you can buy all the parts at your local dealer all you need is h22 pistons and rods, and k24 crank....google the article and you will be blown away that someone figured this out. and am in the process of stroking my f20 with this set up....

Tuner Eddy

this has been known for a good while now.

HondaKyle

Welcome to 2005! I would rather just build my motor with stonger parts...

iconicpower

use forged h22 internals and its still cheaper than a stroker, plus there is no block mods if your sleeves are decent.

iconicpower

ya alot of ppl dont know about it. thats why its posted.

White Smoke

Anyone read the new turbo mag yet? k24 crank + h22 pistons, rods = 2.4 f20c

This has been discussed on at least 10 threads here. Check out the search next time and just bump one of the old threads.

iconicpower

my bad...i will post on how well my'n dyno's with this set up...im way excited

bigmacnfries

good luck for some decent numbers mate - looking forward to seeing the results..

White Smoke

Please Do

HondaKyle

I dont think it will be worth it...

madchiller

apparently alabama is about 4 years behind the rest of the USA

ntensehonda

I'm actually interested in knowing about the outcome...sometimes these things are worth it, and sometimes they aren't. I didn't personally know about this, but I know that someone has to experiment, so better him than me! :D

Anywho, don't forget to let us know how the results are, iconipower!

HondaKyle

I doubt it will be over 250 to the wheels.

ntensehonda

Well, thats about 45 more than mine did in stock trim.

S2KILLA

^^^ yeah but u still have about 6K still in your pocket...

JDogg

using h22 pistons in an f20c is about as retarded as using vitara's in a d-series.

the compression height is wrong, the piston ends up way down in the hole
the pin offset ends up on the wrong side making the **** noisy and likely to break a piston
the valve angles are different, meaning the valve reliefs are wrong

h22 rods are too short to be reliable with a 99mm crank.

S2KILLA

^^^but dude, hes gonna be making a whopping 250 at the wheels...

bigmacnfries

^^ you can't argue with those kinda numbers...

iconicpower

so i take it you have done this set up then or know someone who tried it and didnt work?....half of you ppl on here are a$$ holes...if you really have the time to sit here and rag on something different that someone is try'n then you need a new outlet for your time....im sorry if you are affended by this set up for a stroker kit...but i dont need your negitive pointless input...if you have something constructive to say (even negitive such as you tried this and it didnt work) please be my guest and post on it....other wise take your hated for something you dont agree with and post your own thread.....and i recommend titling it "F%&8 everybody".....

iconicpower

i hope i make 240wheel and better low end torque from the shorter stroke ratio....what would be the best to tune this with hondata? or is it even needed

JDogg

the point is that this setup is WRONG, just because the parts fit together dosnt mean they are right. There is nothing wrong with a stroker motor, but k24 crank with h22 rods and pistons does not fit properly in an f2xC block.

Chris.

iTrader: (4)

they fit with machining... but i would still much rather buy a stroker kit.

i think i would much rather use an f22c crank/rods and build the head. seems like you can get similar numbers for the same price WHILE using f-series specific parts

S2KILLA

im pretty much an ******* ill admit it, but your idea just seems dumb to me and pretty much everyone else... i dont have a problem with stoker kits that are done correctly... and dont be offended but if you need something else to stroke give kyle a call, he wont mind... and your title should be: "im gonna be a cheap *** and try to stroke my S with a civic wallet"

/thread

JDogg

h22 rods are still too short, h22 pistons are still designed for a motor that spins the wrong way and the compression height is too short to work with the h22 rods in the f2xc block. the pistons sit way down in the hole

dagle

iTrader: (1)

lol i didnt read the thread, he wanted to use the H22 rods designed for 90.7mm stroke crank in place of the F20 or F22C's 97/99?! hahaha