Wire harness/wire tuck assistance needed...
#1
Member
Thread Starter
Join Date: Jun 2004
Location: Clemson, SC, United States
Posts: 1,117
Likes: 0
Received 0 Likes
on
0 Posts
Wire harness/wire tuck assistance needed...
Hey guys, I realize this has been covered a lot of times, moreso in the civic and teg forums, but I still didn't find the answer to my question. I am doing a moderate wire hide/tuck just to clean up my engine bay since my motor is out for build right now and I needed some help. I am not running any of the smaller wires like the headlights and stuff because I want to be able to access them without taking off my fender.
I moved my fusebox inside the car, battery relocation, took out ac, I moved some smaller sensors and vacuum lines underneath where the im will be, and then I ran those massive plugs underneath my abs modulator so you cannot see them. So finally, my question is when I moved the big plugs I got a lot of slack in the wiring harness and I do not know where to put it all because I don't have enough room to bunch it up or anything, all of the plugs for like the thermostat and tranny are on the other side of the engine bay far from where they were and I don't have any other ideas on how to move them back other than bunching up the harness in one place. Does anybody have any other ideas? Pics? Any other suggestions about wire hiding in general? I will post up pics tommorow to ensure everybody understands what I'm talking about. Sorry for the ramble, thanks in advance guys!
I moved my fusebox inside the car, battery relocation, took out ac, I moved some smaller sensors and vacuum lines underneath where the im will be, and then I ran those massive plugs underneath my abs modulator so you cannot see them. So finally, my question is when I moved the big plugs I got a lot of slack in the wiring harness and I do not know where to put it all because I don't have enough room to bunch it up or anything, all of the plugs for like the thermostat and tranny are on the other side of the engine bay far from where they were and I don't have any other ideas on how to move them back other than bunching up the harness in one place. Does anybody have any other ideas? Pics? Any other suggestions about wire hiding in general? I will post up pics tommorow to ensure everybody understands what I'm talking about. Sorry for the ramble, thanks in advance guys!
Thread
Thread Starter
Forum
Replies
Last Post
Markb16a
Honda CRX / EF Civic (1988 - 1991)
1
11-17-2005 05:56 PM