hamadiscool

I searched and looked in the helms but didnt find much help on taking off the passenger side front fender. I heard there are sites with pictures that show how to take off the fender. The reason is my fender somehow got bent while it was in the garage, not sure if it was the temp change or what but it sticks out now and looks bad. So any help will be appreiated it, thanks.

prelude1897

Before following these steps, have you tried to just press on it a little?


1) You'll need to pop to hood and you'll see (3) 10mm bolts
2) Take your bumper off, and you'll see (2) 10mm bolts by the headlight that need to be taken out
3) Open your door and you'll see (1) 10mm bolt in the door jam that needs to be taken out
4) Take your side skirt off and you'll see (1) 10mm bolt that is holding the bottom part of your fender that needs to be taken out

That should be all the bolts that need to be taken out and your fender should come off

hamadiscool

ya i have tried, I bought my car from a mechanic who bought it with a front accident. I guess that mechanic just didnt do a good job...iono but thanks i will try that

vtecjb

same damn **** happened to my 5th gen it looks like *** now. for a second i thought stole that pic from me haha. same color and all

hamadiscool

ya i dont know what to do it looks like even if i take it off and try to bend it, it wont do the job....oh well i guess i will just have to live with it until i can get it professionaly fixed...unless someone help me thanks

Thanks knightsport!

theres a **** load of bolts. EVERYWHERE

Lude Acts

I don't think temp change can warp a fender like that.....