shaking, popping, clunking, pulling to the left..
05-02-2012, 04:35 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Jan 2009
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
shaking, popping, clunking, pulling to the left..
i was told it was the ball joints so i replaced the upper and lower. it rides just as bad! nothing has changed.
does anyone know what is causing this? it feels really unsafe to drive.
does anyone know what is causing this? it feels really unsafe to drive.
05-02-2012, 11:20 AM
#2
Honda-Tech Member
Join Date: Dec 2009
Posts: 233
Likes: 0
Received 0 Likes
on
0 Posts
Re: shaking, popping, clunking, pulling to the left..
Sway bar end links can cause the popping/clunking, I'm thinking alignment for pulling to left. Also check radius rod nuts in front cross member, if they have been removed they HAVE to be replaced, one time use only.
GL
Mike
GL
Mike
05-02-2012, 11:59 AM
#3
Honda-Tech Member
Thread Starter
Join Date: Jan 2009
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
Re: shaking, popping, clunking, pulling to the left..
Its a SH. The ball joint that the radius rod connects to looks a bit worn. Could this be the problem?
It feels so unsafe to drive, you think the problem would be obvious.
It feels so unsafe to drive, you think the problem would be obvious.
Thread
Thread Starter
Forum
Replies
Last Post
