Nitrous Burp Need HELP
#1
Thread Starter
Join Date: Sep 2005
Location: Kirkland, il, united states
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Nitrous Burp Need HELP
Okay well i was at the track, and i was spraying a 100 shot ya i know (dumb MOVE) on a single fogger, well any ways i think some vacume lines came undone, well on my vtec controller i reads -3 intake pressure now the nitrouse blew my intake off and i did a number, nothing internally is messed up, but why would it read not intake pressure ? it runs REAL RUFF but then the check engine light comes on and it runs fine but will not let me pass 6K rpms, what should i look for for the intake pressure or what should i look for period, and its a h22a1 motor, but i would like some help thank you.
Trending Topics
#8
Honda-Tech Member
Join Date: Sep 2005
Location: Paterson, NJ, Usa
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
sorry coudln't resist but as for the problem you have to see what code you got by taking a look at the ECU and see how many blinks the light puts out. The ECU is located under the passengers side carpet under the glovebox.
#9
the mad scientist, how many times do i have to tell you i like to call myself the mad scientist dom??
geez, anyways lets get out the NOS powered air tools and go to work pulling the MOTEC full system exhaust....
geez, anyways lets get out the NOS powered air tools and go to work pulling the MOTEC full system exhaust....
#10
Master H Technician
Join Date: Sep 2002
Location: Atlanta, GA, USA
Posts: 819
Likes: 0
Received 0 Likes
on
0 Posts
Re: (mgags7)
Im with stupid... mgags, having fun or what?
Oh well, if the guy is too incompetent to pull a code and determine he blew a map sensor, egr, or some other sort of stupid sensor than he deserves what hes facing.. aside from his awesome intelligence on nitrous use...
Oh well, if the guy is too incompetent to pull a code and determine he blew a map sensor, egr, or some other sort of stupid sensor than he deserves what hes facing.. aside from his awesome intelligence on nitrous use...
#11
Thread Starter
Join Date: Sep 2005
Location: Kirkland, il, united states
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Re: (JTCdudeman)
lol, its pathetic u guys get one liners from a movie, and i was woundering about a intake pressure, that was it, i have an honda civic vx wit h22a1. but im gonna go be cool and watch fome fast and the furious so i can have some one liners
my vtec controller is reading -3 kpsi intake pressure i was woundering why would it be at -3 thats it, i was asking for some help not one liners, instead of being dicks or if u dont have a slolution keep ur 10 year old comments out of the post it says need help not need one liners from a movie.
my vtec controller is reading -3 kpsi intake pressure i was woundering why would it be at -3 thats it, i was asking for some help not one liners, instead of being dicks or if u dont have a slolution keep ur 10 year old comments out of the post it says need help not need one liners from a movie.
#12
Join Date: Feb 2005
Location: san diego, CA, united states
Posts: 590
Likes: 0
Received 0 Likes
on
0 Posts
Re: (thielke2004)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by thielke2004 »</TD></TR><TR><TD CLASS="quote">lol, its pathetic u guys get one liners from a movie, and i was woundering about a intake pressure, that was it, i have an honda civic vx wit h22a1. but im gonna go be cool and watch fome fast and the furious so i can have some one liners
my vtec controller is reading -3 kpsi intake pressure i was woundering why would it be at -3 thats it, i was asking for some help not one liners, instead of being dicks or if u dont have a slolution keep ur 10 year old comments out of the post it says need help not need one liners from a movie.</TD></TR></TABLE>
seriously what the **** are you talking about?
my vtec controller is reading -3 kpsi intake pressure i was woundering why would it be at -3 thats it, i was asking for some help not one liners, instead of being dicks or if u dont have a slolution keep ur 10 year old comments out of the post it says need help not need one liners from a movie.</TD></TR></TABLE>
seriously what the **** are you talking about?
#13
Master H Technician
Join Date: Sep 2002
Location: Atlanta, GA, USA
Posts: 819
Likes: 0
Received 0 Likes
on
0 Posts
Re: (vtech22)
agreed... I told the kid what he needs to do.. pull the code... Lets see... its reading just -3 right? Sounds like map sensor issues.. Either the hose it blown a hole or the map sensor has went pop...
#14
Member
Join Date: Jul 2005
Location: Nobody fcuks with the Jesus...
Posts: 1,196
Likes: 0
Received 0 Likes
on
0 Posts
Re: (JTCdudeman)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JTCdudeman »</TD></TR><TR><TD CLASS="quote">agreed... I told the kid what he needs to do.. pull the code... Lets see... its reading just -3 right? Sounds like map sensor issues.. Either the hose it blown a hole or the map sensor has went pop...</TD></TR></TABLE>
Don't you think you guys are asking too much of him? I mean, after all, he only lives his life 1/4 mile at a time...
hee hee, this is too funny.
Don't you think you guys are asking too much of him? I mean, after all, he only lives his life 1/4 mile at a time...
hee hee, this is too funny.
#15
Join Date: Jun 2005
Location: The Wizard Of Oz, State Rd 1505, Section 8
Posts: 3,241
Likes: 0
Received 0 Likes
on
0 Posts
Re: (thielke2004)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by thielke2004 »</TD></TR><TR><TD CLASS="quote">ur an idiot, man u are a tool.</TD></TR></TABLE>
I swear these ******* new people keep coming on here talking **** to everyone.........its crazy........haven't even established themselves yet.
Kinda reminds me of someone.....hmm.......
I swear these ******* new people keep coming on here talking **** to everyone.........its crazy........haven't even established themselves yet.
Kinda reminds me of someone.....hmm.......
#16
Thread Starter
Join Date: Sep 2005
Location: Kirkland, il, united states
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Re: (TheKingPin)
me talking ****, ok u ******* idiot. i went to the track yesterday and got home u ******* ******, and i was hoping some one might have known what it was i did not get to it until today, so im not talking ****. u guys are using one liners, why i dunno was just asking for help and yes it was a map sensor but the thing is that i have a map sensor coming of the throttle body but what is weird i have another one, now i dunno where it goes it has to holes for screws, so i dunno where it goes i cant find the home for it.
im sorry for being an ***, but every time i look on these things people always crtisize about other people. i asked a question if u dont know then dont say any thing. people come on here for help, not to get crisized, my problem does not effect you at all, so why take the time to judge.
im sorry for being an ***, but every time i look on these things people always crtisize about other people. i asked a question if u dont know then dont say any thing. people come on here for help, not to get crisized, my problem does not effect you at all, so why take the time to judge.
#18
Member
Join Date: Jul 2005
Location: Nobody fcuks with the Jesus...
Posts: 1,196
Likes: 0
Received 0 Likes
on
0 Posts
Re: (thielke2004)
QUESTION:
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by thielke2004 »</TD></TR><TR><TD CLASS="quote">i asked a question if u dont know then dont say any thing. people come on here for help, not to get crisized, my problem does not effect you at all, so why take the time to judge.</TD></TR></TABLE>
ANSWER #1:
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Sabbotage »</TD></TR><TR><TD CLASS="quote">pull the codes from the CEL and see whats wrong.</TD></TR></TABLE>
ANSWER #2:
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mgags7 »</TD></TR><TR><TD CLASS="quote">sounds like you blew the welds on the intake manifold..../QUOTE]
ANSWER #3:
[QUOTE=MonoDJ123]as for the problem you have to see what code you got by taking a look at the ECU and see how many blinks the light puts out. The ECU is located under the passengers side carpet under the glovebox.</TD></TR></TABLE>
QUESTION (AGAIN), but still haven't taken our advice
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by thielke2004 »</TD></TR><TR><TD CLASS="quote">my vtec controller is reading -3 kpsi intake pressure i was woundering why would it be at -3 thats it,QUOTE]
ANSWER #4:
[QUOTE=JTCdudeman]agreed... I told the kid what he needs to do.. pull the code... Lets see... its reading just -3 right? Sounds like map sensor issues.. Either the hose it blown a hole or the map sensor has went pop...</TD></TR></TABLE>
Now we've obviously answered your question to the best of our abilities--numerous times, I might add. If that's not enough for you, well then I'm sorry.
We're yanking your chain because:
a.) You did something dumb
b.) You got salty for a little joke
c.) You didn't take our advice
d.) You're a tool
The best thing for you to do is take the stick out of your ***, and get over it.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by thielke2004 »</TD></TR><TR><TD CLASS="quote">i asked a question if u dont know then dont say any thing. people come on here for help, not to get crisized, my problem does not effect you at all, so why take the time to judge.</TD></TR></TABLE>
ANSWER #1:
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Sabbotage »</TD></TR><TR><TD CLASS="quote">pull the codes from the CEL and see whats wrong.</TD></TR></TABLE>
ANSWER #2:
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mgags7 »</TD></TR><TR><TD CLASS="quote">sounds like you blew the welds on the intake manifold..../QUOTE]
ANSWER #3:
[QUOTE=MonoDJ123]as for the problem you have to see what code you got by taking a look at the ECU and see how many blinks the light puts out. The ECU is located under the passengers side carpet under the glovebox.</TD></TR></TABLE>
QUESTION (AGAIN), but still haven't taken our advice
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by thielke2004 »</TD></TR><TR><TD CLASS="quote">my vtec controller is reading -3 kpsi intake pressure i was woundering why would it be at -3 thats it,QUOTE]
ANSWER #4:
[QUOTE=JTCdudeman]agreed... I told the kid what he needs to do.. pull the code... Lets see... its reading just -3 right? Sounds like map sensor issues.. Either the hose it blown a hole or the map sensor has went pop...</TD></TR></TABLE>
Now we've obviously answered your question to the best of our abilities--numerous times, I might add. If that's not enough for you, well then I'm sorry.
We're yanking your chain because:
a.) You did something dumb
b.) You got salty for a little joke
c.) You didn't take our advice
d.) You're a tool
The best thing for you to do is take the stick out of your ***, and get over it.
#20
Honda-Tech Member
Join Date: Jun 2004
Location: PA, USA
Posts: 510
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Sober_John)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Sober_John »</TD></TR><TR><TD CLASS="quote">
Don't you think you guys are asking too much of him?</TD></TR></TABLE>
I dont think anyone is asking too much of him. I mean after all, ask any racer, any real racer. It doesn't matter if you win by an inch or a mile; winning's winning.
Don't you think you guys are asking too much of him?</TD></TR></TABLE>
I dont think anyone is asking too much of him. I mean after all, ask any racer, any real racer. It doesn't matter if you win by an inch or a mile; winning's winning.
#22
Join Date: Jun 2005
Location: The Wizard Of Oz, State Rd 1505, Section 8
Posts: 3,241
Likes: 0
Received 0 Likes
on
0 Posts
Re: (thielke2004)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by thielke2004 »</TD></TR><TR><TD CLASS="quote">im sorry for being an ***, but every time i look on these things people always crtisize about other people. i asked a question if u dont know then dont say any thing. people come on here for help, not to get crisized, my problem does not effect you at all, so why take the time to judge.</TD></TR></TABLE>
Thats H-T - if you don't like it get the **** out.......go to another forum.
Yes, i'm a ******* idiot - and a ******* ****** - man........thats like my 567th time being called that........
When i said " reminds me of someone i know" - i was talking about myself.
Stop bitching because your feelings are hurt.....suck it up.......this will happen more than you think, and if you start crying about it everytime it happens, you'll get no where..........
Thats H-T - if you don't like it get the **** out.......go to another forum.
Yes, i'm a ******* idiot - and a ******* ****** - man........thats like my 567th time being called that........
When i said " reminds me of someone i know" - i was talking about myself.
Stop bitching because your feelings are hurt.....suck it up.......this will happen more than you think, and if you start crying about it everytime it happens, you'll get no where..........
#23
Honda-Tech Member
Join Date: Jul 2003
Location: MPLS, MN, USA
Posts: 766
Likes: 0
Received 0 Likes
on
0 Posts
Re: (thielke2004)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by thielke2004 »</TD></TR><TR><TD CLASS="quote"> u guys are using one liners, why i dunno was just asking for help and yes it was a map sensor but the thing is that i have a map sensor coming of the throttle body but what is weird i have another one, now i dunno where it goes it has to holes for screws, so i dunno where it goes i cant find the home for it.</TD></TR></TABLE>
So you're saying you have two map sensors? Maybe you should have researched your motor and how it works before you ran a 100 shot.
Oh yeah, your first post contains one period. Learn how to use english because no one can understand what the **** you're talking about.
So you're saying you have two map sensors? Maybe you should have researched your motor and how it works before you ran a 100 shot.
Oh yeah, your first post contains one period. Learn how to use english because no one can understand what the **** you're talking about.