Need Help ASAP lame question
#1
Junior Member
Thread Starter
Join Date: Feb 2006
Location: OLATHE, ks, USA
Posts: 174
Likes: 0
Received 0 Likes
on
0 Posts
Need Help ASAP lame question
so I have the JDM rain guards and i figured all but one thing out the retaining clip all the way on the end of the guard do i cut the seal and slide it through or am i missing something
#2
Re: Need Help ASAP lame question (slammed95lude)
I copied this off of socalprelude, hope it helps.
After this you should have everithing almost finished, now there is the 2 brackets, the 2 pins and the 2 pieces of black rubber left,
I honestly don't know how to place those brackets, all i can tnik is to put the pins in the hole at the end of the visor, and bout the rubber I have no idea, if somebody knows please help me complete this write up, I hope this helps[/quote]
I had no idea how to put those on either lol, they should come with directions. After hours of effing around, I figured there was no way to seat those brackets properly without slicing through the weather strip, I was very hesitant to do this, but once i did it and slipped the bracket through, it worked out nicely. the little pin thing, pushes through the little hole in the visor and then into the little hole in the bracket. hmm..... so anyways, make a small slice though the rubber right at the crease point and slip the bracket through, and clamp the bracket to the metal on the inside. I don't know if you all get it, pictures would most definately clear things up, butim so lazy
After this you should have everithing almost finished, now there is the 2 brackets, the 2 pins and the 2 pieces of black rubber left,
I honestly don't know how to place those brackets, all i can tnik is to put the pins in the hole at the end of the visor, and bout the rubber I have no idea, if somebody knows please help me complete this write up, I hope this helps[/quote]
I had no idea how to put those on either lol, they should come with directions. After hours of effing around, I figured there was no way to seat those brackets properly without slicing through the weather strip, I was very hesitant to do this, but once i did it and slipped the bracket through, it worked out nicely. the little pin thing, pushes through the little hole in the visor and then into the little hole in the bracket. hmm..... so anyways, make a small slice though the rubber right at the crease point and slip the bracket through, and clamp the bracket to the metal on the inside. I don't know if you all get it, pictures would most definately clear things up, butim so lazy
#4
Honda-Tech Member
Join Date: May 2005
Location: CA, 95682
Posts: 1,514
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need Help ASAP lame question (OmarR)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by OmarR »</TD></TR><TR><TD CLASS="quote">I copied this off of socalprelude, hope it helps.
After this you should have everithing almost finished, now there is the 2 brackets, the 2 pins and the 2 pieces of black rubber left,
I honestly don't know how to place those brackets, all i can tnik is to put the pins in the hole at the end of the visor, and bout the rubber I have no idea, if somebody knows please help me complete this write up, I hope this helps
I had no idea how to put those on either lol, they should come with directions. After hours of effing around, I figured there was no way to seat those brackets properly without slicing through the weather strip, I was very hesitant to do this, but once i did it and slipped the bracket through, it worked out nicely. the little pin thing, pushes through the little hole in the visor and then into the little hole in the bracket. hmm..... so anyways, make a small slice though the rubber right at the crease point and slip the bracket through, and clamp the bracket to the metal on the inside. I don't know if you all get it, pictures would most definately clear things up, butim so lazy </TD></TR></TABLE>
hey were did u get the clips from, i called honda dealers by me and i had no luck.
After this you should have everithing almost finished, now there is the 2 brackets, the 2 pins and the 2 pieces of black rubber left,
I honestly don't know how to place those brackets, all i can tnik is to put the pins in the hole at the end of the visor, and bout the rubber I have no idea, if somebody knows please help me complete this write up, I hope this helps
I had no idea how to put those on either lol, they should come with directions. After hours of effing around, I figured there was no way to seat those brackets properly without slicing through the weather strip, I was very hesitant to do this, but once i did it and slipped the bracket through, it worked out nicely. the little pin thing, pushes through the little hole in the visor and then into the little hole in the bracket. hmm..... so anyways, make a small slice though the rubber right at the crease point and slip the bracket through, and clamp the bracket to the metal on the inside. I don't know if you all get it, pictures would most definately clear things up, butim so lazy </TD></TR></TABLE>
hey were did u get the clips from, i called honda dealers by me and i had no luck.
Thread
Thread Starter
Forum
Replies
Last Post