slimbunnies

I have snapped both of my studs in my motor mount bracket -the one attatched to the engine itself. I've tried tapping thru the old stund but i was unsuccessful. I purchased a new bracket. I am runing into a slight problem. Ive taken my valvecover in order to remove the upper timing belt cover, now i am trouble removing the bottom timing belt cover. how do i go about removig it? I will be replacing the stock motormounts with Innovative motor mounts.

holmesnmanny

normaly there's a rubber grommet that you need to remove to get it to come all the way off...assuming you removed all timing cover bolts

holmesnmanny

if you're talking about the actual mount...you need to use a jack with a piece of wood in between it and the oil pan to gently slightly raise the engine to remove the timing side mount