slammedbbs

ok heres the thing. where my oil filter screws on to w.e that part is its leaking. its leaking right where the part meets with the block. iam wondering if any one knows the name of the part. or how it comes off or any thing would help becouse i dont no any thing.

Scrim12

That is your oil cooler, and the gasket is a common problem spot on the H22. Just be glad you noticed it before it failed all together like has happened to so many before you. I can't remember exactly where the screws are for it since it's been so long, but if you just unscrew your oil filter i'm sure you'll be able to see what needs to come off. The hardest part is holding everything in place when you put the new one in.

slammedbbs

hey man thanks alot thats what i thought it was, but the part store was telling me it was an oil pump lol.

minilogoguy18

All you do is use either a deep 17mm or 19mm, can't remember which but pretty sure it's 17 and just put it over the part that the filter screws onto, it also acts as a bolt to hold to cooler to the block. It's one of the easiest seals to fix on the motor, just do it next time you change your oil or do it now and change the oil as the filter obviously has to come off.

kmcormick9

Anybody know the part # for the gasket or have a link to it on an auto parts chains site?

EJ-1

damn i did it last week..autozone or auto part store doesnt carry the gasket...i bought one from honda which was like 5 dollar...unscrew the filter an its a deep socket 30, or 33 i forgot its huge though or 23 i forgot which one it was...

minilogoguy18

Don't buy cheap gaskets from the auto parts store, it's only maybe less than a dollar difference for the Honda one that is guaranteed to fit.

Honda p/n 91316-PE7-730 shows being less than $3

serjey15

X2.
I went to schucks to buy a valve cover gasket.
And it didnt fit at all.
It was like too wide.
so I had to use the same one.
So yes,, buy parts like that at the dealership.

j01bb6

i have the same leak. went to honda and bought the o ring gasket for the oil cooler i think it was like 3 dollars and some change.
-01 sh

ml21

Just go to honda i belive its the only place to get it as far as part numbers from honda they change with every new year because most new hondas use the same o-ring, save yourself the trouble and do it right the first time.

nus_dogg

Yeah, had to replace mine too when I first swap in my JDM H22. Go with Honda seals; don't cheap out.

sde780

Make sure you get a 22 or 23mm deep socket I cant remember which but that was an odd size

5thgencoop760

http://cgi.ebay.com/ebaymotors/97-01...Q5fAccessories

Buy this too while ur at it, I recently replaced the oil cooler ring as well On my sh. also was due for a timing belt etc... this kit is awsome. my lude runs great..