Crxh22ajdm

I have an h22a swaped on a CD5, before swaping the engine I change the water pump the balanser shaf the timing belt and the seals for the crank and cams. I didnt put the top cover for the timing belt, cause I converted to a munual tensioner, so I want it to see if somerhing goes wrong with tensioner, like getting lossed or something, so a few days ago a check the belt and I notice there is some oil outside the water pump, where the belt goes, so I check to see if the belt had some oil, and yes it has a lil bit, but outside the belt there is nothing, what can it be, It doesnt leave any oil drops on the floor.

sorry for misspealling my first language is not inglish

holmesnmanny

Could just be residual oil maybe coming from valve cover.

BlackCatt

To try and narrow down the source of the oil, you can also degrease the area
currently affected. Get is really clean, then go for a small drive and check to
see where is the source of the oil coming from.