Colby71

Hello I have an h22 in an eg hatch with a m2b4 trans. I have a new oil leak it is getting all over my drivers/timing belt side of my suspension. I have not gotten a good look yet becues I had to go to work. It could of been falling on my axle witch spun it all over the suspension/stearing rack. I was just wondering if there is a common place for leaking back there. It is comming from below my Intake manifold. It could be from the trasn also.

vlang29

oil cooler o-ring is very common

Acidcrakker

Yeah but Oil Cooler O-Ring leak getting oil on the T-belt side of the motor. That dont sound right

vlang29

ya, i am a bit unsure of the description

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Colby71 &raquo;</TD></TR><TR><TD CLASS="quote"> It is comming from below my Intake manifold. It could of been falling on my axle witch spun it all over the suspension/stearing rack.</TD></TR></TABLE>

sounds like oil cooler.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Colby71 &raquo;</TD></TR><TR><TD CLASS="quote"> I have a new oil leak it is getting all over my drivers/timing belt side of my suspension. </TD></TR></TABLE>

sounds like oil pump/front main seal

Colby71

I am on my way out to check it out in a fue min. ill will post what it is.

Acidcrakker

Pics help alot too!

es_squared

I just had a similar problem that I thought was the o ring, but it turned out to be something on the timing cover popped off, cant remember what it was, i think some gasket/seal. Anyway I changed my t belt because it was soaked in oil.

H22Honda98

i had the same problem, turned out to be cams seals....

Colby71

Tons of oil I have not ran it for the past fue days today i brought it like 1/10 of a mile and it is all over I will have pics tonight just have to resize them so it will not take so long to load up.

Colby71

Hey guys here are some pics decied I had time befor work.

FLAC- oil leaking right off it


Where it looks like it is comming from

ne4spe

i cant really tell where the oil could be coming from but i jus recently had a problem with oil LEAKS. i would check to see if your PCV valve is good first bcuz as it turned out it as that goin bad which caused all the excess pressure to leak out elsewhere. i had to change my valvle cover gasket my oil cooler o ring and my vtec oil pressure gasket b4 i found out that was the problem and my leak looked sounds similar to what you are describing because oil spun off everywhere off of my axle

Colby71

Turned out to be the screw you take out to alligne the balence shafts. I put a new one in and used some locktite.