fully built h22a TURBO project
#1
Honda-Tech Member
Thread Starter
Join Date: Jul 2005
Location: san diego, ca, 92105
Posts: 975
Likes: 0
Received 0 Likes
on
0 Posts
fully built h22a TURBO project
here a start for me, got this done a while back and it still sitting in my garage waiting for the summer so i can put it all together. nothing is assemble yet.. also any advice on the balancer? can i just stuck the balancer shaft into the block and leave it there instead of getting a balancer eliminator kit?
right now im running a G22(f22b2 block with h22 head) Turbo setup in my 5th gen..about to switch over to the fully built this summer
the block is 87mm sleeved, 87mm CP 9:1 piston, eagle rods, and micropolish crank.
right now im running a G22(f22b2 block with h22 head) Turbo setup in my 5th gen..about to switch over to the fully built this summer
the block is 87mm sleeved, 87mm CP 9:1 piston, eagle rods, and micropolish crank.
#2
Honda-Tech Member
Join Date: Mar 2007
Location: SOCAL, ca, 91702
Posts: 3,074
Likes: 0
Received 0 Likes
on
0 Posts
Re: fully built h22a TURBO project (vietdragontekx)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vietdragontekx »</TD></TR><TR><TD CLASS="quote">here a start for me, got this done a while back and it still sitting in my garage waiting for the summer so i can put it all together. nothing is assemble yet.. also any advice on the balancer? can i just stuck the balancer shaft into the block and leave it there instead of getting a balancer eliminator kit?
right now im running a G22(f22b2 block with h22 head) Turbo setup in my 5th gen..about to switch over to the fully built this summer
the block is 87mm sleeved, 87mm CP 9:1 piston, eagle rods, and micropolish crank.
</TD></TR></TABLE>
nice! if you don't want to get the balance shaft eliminator kit you can just reinstall the shafts and just leave the belt off. i would recommend getting the eliminator kit though. the balance shafts are quite heavy and you already have it all apart... might as well do it..
Good luck! keep us posted when its done and dyno'd! what engine management are you going with? also what turbo setup? if you don't mind me asking.
right now im running a G22(f22b2 block with h22 head) Turbo setup in my 5th gen..about to switch over to the fully built this summer
the block is 87mm sleeved, 87mm CP 9:1 piston, eagle rods, and micropolish crank.
</TD></TR></TABLE>
nice! if you don't want to get the balance shaft eliminator kit you can just reinstall the shafts and just leave the belt off. i would recommend getting the eliminator kit though. the balance shafts are quite heavy and you already have it all apart... might as well do it..
Good luck! keep us posted when its done and dyno'd! what engine management are you going with? also what turbo setup? if you don't mind me asking.
#3
Honda-Tech Member
Thread Starter
Join Date: Jul 2005
Location: san diego, ca, 92105
Posts: 975
Likes: 0
Received 0 Likes
on
0 Posts
Re: fully built h22a TURBO project (h22crxpwr)
im running honda s300 with a p28 ecu right now on my G22 setup with a turbonetic turbo kit with an upgraded t60 turbo. probably will be running the same thing on the built motor.
#4
Honda-Tech Member
Join Date: Mar 2007
Location: SOCAL, ca, 91702
Posts: 3,074
Likes: 0
Received 0 Likes
on
0 Posts
Re: fully built h22a TURBO project (vietdragontekx)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vietdragontekx »</TD></TR><TR><TD CLASS="quote">im running honda s300 with a p28 ecu right now on my G22 setup with a turbonetic turbo kit with an upgraded t60 turbo. probably will be running the same thing on the built motor. </TD></TR></TABLE>
cool.. should run great.. good luck with the build
cool.. should run great.. good luck with the build
#7
Junior Member
Join Date: Dec 2006
Location: hamilton, ontario, canada
Posts: 875
Likes: 0
Received 0 Likes
on
0 Posts
Re: fully built h22a TURBO project (vietdragontekx)
sleeve install looks flawless
hey just out of curiousity how is the g22 turbo setup holding up any problems with it so far??
hey just out of curiousity how is the g22 turbo setup holding up any problems with it so far??
Trending Topics
#8
Honda-Tech Member
Join Date: Jan 2004
Location: Further down the spiral, TX, usa
Posts: 10,629
Likes: 0
Received 1 Like
on
1 Post
Re: fully built h22a TURBO project (Lubo_25)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Lubo_25 »</TD></TR><TR><TD CLASS="quote">sleeve install looks flawless </TD></TR></TABLE>
Yes it does. What sleeves are you using?
Yes it does. What sleeves are you using?
#10
Former Sponsor
Join Date: Jun 2003
Location: Glen Cove/Richmond, NY/VA
Posts: 1,862
Likes: 0
Received 0 Likes
on
0 Posts
Re: fully built h22a TURBO project (HeedLessInc)
What turbo manifold?
There appears to be anybody who makes a turbo manifold that keeps a/c without going log. Curious if you choose to drive without a/c.
There appears to be anybody who makes a turbo manifold that keeps a/c without going log. Curious if you choose to drive without a/c.
#11
Honda-Tech Member
Thread Starter
Join Date: Jul 2005
Location: san diego, ca, 92105
Posts: 975
Likes: 0
Received 0 Likes
on
0 Posts
Re: fully built h22a TURBO project (Lubo_25)
yeh sleeved was install by a local machine shop that i know of. they did a really good job.
as for the G22, it been running good. boosted 11.5 psi on it daily and it still fine
as for the G22, it been running good. boosted 11.5 psi on it daily and it still fine
#15
Junior Member
Join Date: Sep 2006
Location: Daygo, Ca
Posts: 240
Likes: 0
Received 0 Likes
on
0 Posts
Re: fully built h22a TURBO project (vietdragontekx)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vietdragontekx »</TD></TR><TR><TD CLASS="quote">im looking for around 400-500 whp.. that enough for me</TD></TR></TABLE>
Damn that's a lot! I hope your tranny doesn't break! Get a good clutch/drive shafts!
Damn that's a lot! I hope your tranny doesn't break! Get a good clutch/drive shafts!
#17
Honda-Tech Member
Join Date: Jan 2004
Location: Further down the spiral, TX, usa
Posts: 10,629
Likes: 0
Received 1 Like
on
1 Post
Re: fully built h22a TURBO project (vietdragontekx)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vietdragontekx »</TD></TR><TR><TD CLASS="quote">i got a built h23 tranny with quaife lsd, going to get some racing axle </TD></TR></TABLE>
Built how? Just curious
Built how? Just curious
#18
Honda-Tech Member
Thread Starter
Join Date: Jul 2005
Location: san diego, ca, 92105
Posts: 975
Likes: 0
Received 0 Likes
on
0 Posts
Re: fully built h22a TURBO project (Hawkze_2.3)
stronger gears was install and coated. install quaife lsd. all was done at a shop, i forgot the name.
#19
Honda-Tech Member
Join Date: Jan 2004
Location: Further down the spiral, TX, usa
Posts: 10,629
Likes: 0
Received 1 Like
on
1 Post
Re: fully built h22a TURBO project (vietdragontekx)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vietdragontekx »</TD></TR><TR><TD CLASS="quote">stronger gears was install and coated. install quaife lsd. all was done at a shop, i forgot the name. </TD></TR></TABLE>
Ahh....cryo-treated? I would love to get a taller 5th gear for mine for cruising.
Ahh....cryo-treated? I would love to get a taller 5th gear for mine for cruising.
#24
Honda-Tech Member
iTrader: (1)
Re: fully built h22a TURBO project (vietdragontekx)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vietdragontekx »</TD></TR><TR><TD CLASS="quote">i got a built h23 tranny with quaife lsd, going to get some racing axle </TD></TR></TABLE>
Why do you feel the need to get racing axles?
Why do you feel the need to get racing axles?