egr pic?
11-20-2002, 01:10 AM
#1
Thread Starter
Join Date: Jan 2002
Location: miami, fl, USA
Posts: 1,803
Likes: 0
Received 0 Likes
on
0 Posts
egr pic?
can anyone post a pic of what the egr looks like? I wanna block it off and see if that will end my damn sputtering problem, and also, if I block it off, will I get a CEL?
11-20-2002, 05:28 AM
#4
Honda-Tech Member
Join Date: Apr 2000
Location: Toronto, ON, Canada
Posts: 996
Likes: 0
Received 0 Likes
on
0 Posts
Re: egr pic? (VTECNLUDE)
It's a little close, but this is it. It on the passenger side attached to the intake manifold close to the end of the fuel rail.
This is a block off plate I had made up, but you really want to block the egr hole right at the block to prevent the exhaust gasses from heating up the IM at all.
It's a large pic so I'll just link to it.
http://www.higginstribe.com/gallery/...egr-plate2.jpg
http://www.higginstribe.com/gallery/...=egr-plate.jpg
This is a block off plate I had made up, but you really want to block the egr hole right at the block to prevent the exhaust gasses from heating up the IM at all.
It's a large pic so I'll just link to it.
http://www.higginstribe.com/gallery/...egr-plate2.jpg
http://www.higginstribe.com/gallery/...=egr-plate.jpg
Trending Topics
11-20-2002, 08:35 AM
#8
Honda-Tech Member
Join Date: Dec 2001
Location: Chattanooga, TN
Posts: 440
Likes: 0
Received 0 Likes
on
0 Posts
Re: egr pic? (VTECNLUDE)
Also check out Hondatas intake manifold spacer. Two types are available, one with the EGR port blocked off and another with it open. I purchased the one with the EGR blockoff, nice port size matching and quality but the intake stud spacing/tolerances were a little off.
Thread
Thread Starter
Forum
Replies
Last Post