Converted JDM bb4 auto to manual T2W4 which Ecu should i opt for P13 manual or P72j?
09-27-2015, 10:11 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Sep 2015
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Converted JDM bb4 auto to manual T2W4 which Ecu should i opt for P13 manual or P72j?
I m replacing my auto Jdm bb4 w 5 spd T2W4 tranny, which ecu should i opt for P72 or P13 manual with hondata S300 in mind after that?
10-05-2015, 01:28 AM
#2
Honda-Tech Member
Join Date: Jun 2007
Posts: 253
Likes: 0
Received 0 Likes
on
0 Posts
Re: Converted JDM bb4 auto to manual T2W4 which Ecu should i opt for P13 manual or P7
If your keeping it stock for a while use the P13 but if you are wanting a tune for mods then get the P72.
10-05-2015, 09:38 PM
#3
Honda-Tech Member
Re: Converted JDM bb4 auto to manual T2W4 which Ecu should i opt for P13 manual or P7
You cannot install a s300 into a P13 ECU... so if you intend to use Hondata, you will need the P72. If you aren't putting the s300 and P72 in together right away, you will need to install the P13 until you are prepared to run the s300/P72 combo. Some will suggest that it is OK to run the P72 in place of a P13 ECU... even long term. The fuel and timing mapping are completely different and will not be anywhere near optimum for the H22 in your car... this choice is a backyard BS solution. Take your time, be patient, and do it right the first time. You will be happier in the long run.
Thread
Thread Starter
Forum
Replies
Last Post
Leviata-N
Honda CRX / EF Civic (1988 - 1991)
10
10-05-2007 11:48 PM