Aftermarket H22A Header downpipe hitting oil pan.
#1
Honda-Tech Member
Thread Starter
Aftermarket H22A Header downpipe hitting oil pan.
Bought an H22A swap with some aftermarket headers. Header downpipe touches the oil pan. Does the downpipe on your H22 touch the oil pan?
#3
Honda-Tech Member
Thread Starter
Re: Aftermarket H22A Header downpipe hitting oil pan.
I have a DC Sports header, they have 2 different options.
I have the one that says JDM style.
Part # HHC5029
Does anybody know what the clearance to the oil pan is on the other option?
Part # HHC5009
#4
Honda-Tech Member
Re: Aftermarket H22A Header downpipe hitting oil pan.
if you "After-Market" header comes with a mounting bracket at the back of the engine block i think it shouldn't lean against the oil pan anyhow.... for clearance as my mugen header,10mm or 15mm something like that....
Last edited by razorlude; 08-22-2012 at 02:34 PM.
#5
Honda-Tech Member
Thread Starter
Re: Aftermarket H22A Header downpipe hitting oil pan.
The piping under the oil pan from front to back is touching. Wasn't talking about the mounting bracket I would have hacked it off a long time ago.
#7
Honda-Tech Member
Thread Starter
Trending Topics
#9
Re: Aftermarket H22A Header downpipe hitting oil pan.
i have 5009 and it clears no problem and i have h22a
I also went through two other ebay cheapies and they both cleared it. They musta bought the only one that doesn't.
I also went through two other ebay cheapies and they both cleared it. They musta bought the only one that doesn't.
#10
Honda-Tech Member
Thread Starter
Re: Aftermarket H22A Header downpipe hitting oil pan.
Thanks I really appreciate the help. Gave me the part number and everything. About how much space do you have between the oil pan and the down pipe?
#12
Honda-Tech Member
Join Date: Feb 2012
Location: Lexington, KY
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Re: Aftermarket H22A Header downpipe hitting oil pan.
I had to bend a Bisimoto header to fit correctly. It had zero clearance and needed an inch or so before it would mount up. The Hytech header fit perfect, just had to notch the crossmember edge a bit (5th gen Base).
#13
Honda-Tech Member
Thread Starter
Re: Aftermarket H22A Header downpipe hitting oil pan.
That's exactly what I was hoping for. Thanks again.
How did you bend the header to fit correctly?
How did you bend the header to fit correctly?
#15
Honda-Tech Member
Re: Aftermarket H22A Header downpipe hitting oil pan.
ive had hytech, rmf (replicas) both not fit my h22, hitting the oil pan.
Some heat and a bottle or floor jack properly placed jig, bend just past its memory and all was good. still using the RMF's that didnt fit.
Some heat and a bottle or floor jack properly placed jig, bend just past its memory and all was good. still using the RMF's that didnt fit.
#17
Honda-Tech Member
Thread Starter
Re: Aftermarket H22A Header downpipe hitting oil pan.
Thanks. If bending the pipe is a fail, this info will be a great help.
#19
Honda-Tech Member
Thread Starter
Re: Aftermarket H22A Header downpipe hitting oil pan.
Either way notching out a crossmember is not going to fix my problem.
Thread
Thread Starter
Forum
Replies
Last Post
A Steak Knife
Honda Civic / Del Sol (1992 - 2000)
1
02-23-2018 10:12 AM
trustbuddy
Acura Integra
3
10-20-2004 06:40 PM