1997 Prelude runs on 1 cylinder
#1
Honda-Tech Member
Thread Starter
1997 Prelude runs on 1 cylinder
I did replace my plugs with bkr7e-11, have a chinese obd2-obd1 adapter and running Hondata on a P28 with ID1000 injectors using the plug in values for the dead times it offers.
It started running rough, then ran on 3 then 2 then 1 cylinder and now won't start.
I did replace my plugs last time I tried to start it, and there was no change.
I still have to try these, but I have another OBD2-obd1 adapter, and today I just got another distributor, plugs, and a coil in the mail, and I can reflow the solder on the main relay. What could I be missing if the distributor or coil aren't bad?
It started running rough, then ran on 3 then 2 then 1 cylinder and now won't start.
I did replace my plugs last time I tried to start it, and there was no change.
I still have to try these, but I have another OBD2-obd1 adapter, and today I just got another distributor, plugs, and a coil in the mail, and I can reflow the solder on the main relay. What could I be missing if the distributor or coil aren't bad?
#2
Re: 1997 Prelude runs on 1 cylinder
Wow, I hope your engine is waaaay different than stock. Some specs may help, but you need to get tuned for those injectors to run right.
Thread
Thread Starter
Forum
Replies
Last Post