AJ PwR

Hi Guys,

Sorry for taking so long to update this report. FYI, here's another update


<FONT COLOR="blue">For the parts that fit so far :</FONT>
<FONT COLOR="blue">-J's Racing strut bar (front) 6 holes on the car only 4 line up (it will work)</FONT>
<FONT COLOR="blue">-J's Racing rear strut bar</FONT>
<FONT COLOR="blue">-J's Racing c-pillar bar</FONT>
<FONT COLOR="blue">-J's and Cusco Lower tie bar</FONT>
<FONT COLOR="blue">-T1R Coil springs</FONT>
<FONT COLOR="blue">Spoon b-pipe and N1 Muffler (little bit short because USDM bumper is longer by 1.5-2")</FONT>
<FONT COLOR="blue">-T1R muffler</FONT>
<FONT COLOR="blue">-JDM tail lights (wiring must be extended and some plugs has to be modified)</FONT>
<FONT COLOR="blue">-JDM rear bumper (with replacing re-bar to monocoque bar)</FONT>
<FONT COLOR="blue">-Spoon carbon spoiler **when the hatch all the way up, it will hit the Antenna** **rear wipers will hit the spoiler when you turn them on**</FONT>
<FONT COLOR="blue">-Titanium Antenna</FONT>
<FONT COLOR="blue">-JDM and Mugen door visors</FONT>
<FONT COLOR="blue">-Mugen shiftboot and e-brake cover</FONT>
<FONT COLOR="blue">-JDM mirrors</FONT>
<FONT COLOR="#0000ff">-JDM Tail lights</FONT>
<FONT COLOR="blue">-Mugen door sills</FONT>
<FONT COLOR="blue">-JDM front rebar</FONT>
<FONT COLOR="blue">-Spoon thermoswitch</FONT>
<FONT COLOR="blue">-Spoon drain plugs</FONT>
<FONT COLOR="blue">-J's/Spoon oil cap and rad cap</FONT>
<FONT COLOR="blue">-J's/Spoon brakelines</FONT>
<FONT COLOR="blue">-J's monocoque bar</FONT>
<FONT COLOR="#0000ff">-J's 50RR/RS exhaust</FONT>
<FONT COLOR="#0000ff">-T1R header</FONT>
<FONT COLOR="#0000ff">-T1R b-pipe</FONT>
<FONT COLOR="#0000ff">-Mugen MT and AT pedals</FONT>
<FONT COLOR="#0000ff">-Spoon AT shiftknob</FONT>
<FONT COLOR="#0000ff">-Spoon drain plugs</FONT>
<FONT COLOR="#0000ff">-J's Racing radiator cap</FONT>
<FONT COLOR="#0000ff">-JDM 1.5S side skirts</FONT>
<FONT COLOR="#0000ff">-after market HIDs :D</FONT>
<FONT COLOR="#0000ff">-ALEX / J's Racing tow hooks</FONT>
<FONT COLOR="#0000ff">-JDM Door sills</FONT>
<FONT COLOR="#0000ff">-Momo steering wheel</FONT>
<FONT COLOR="#0000ff">-Splash hub adaptor</FONT>
<FONT COLOR="#0000ff">-Workbell quick release hub</FONT>
<FONT COLOR="#0000ff">-Bride Gias seat</FONT>
<FONT COLOR="#0000ff">-ALEX seat sliders (passenger seat custom bracket for SRS sensor)</FONT>
<FONT COLOR="blue">-Mugen shift boot and e-brake cover</FONT>
<FONT COLOR="#0000ff">-Spoon air filter</FONT>
<FONT COLOR="#0000ff">-Spoon calipers and rotors</FONT>
<FONT COLOR="#0000ff">-H.A.M.P. Oil filter :D</FONT>
<FONT COLOR="#0000ff">-NGK IRIWAY series spark plugs</FONT>

<FONT COLOR="red">Parts that don't fit:</FONT>
<FONT COLOR="red">-all JDM brand front coil-over suspension will not fit without modifications</FONT>
<FONT COLOR="red">-JDM front bumper</FONT>
<FONT COLOR="red">-JDM HID headlamps</FONT>
<FONT COLOR="red">-ALL JDM hood</FONT>
<FONT COLOR="#ff0000">-JDM Fenders</FONT>
<FONT COLOR="red">-ALL JDM grills</FONT>
<FONT COLOR="red">-ALL JDM front or rear bumper or lip / apron (ONLY side skirts will fit)</FONT>
<FONT COLOR="red">-Mugen hatch filler (cannot fit without JDM bumper)</FONT>
<FONT COLOR="red">-J's/Spoon Engine Torque Damper</FONT>
<FONT COLOR="red">-J's/Spoon throttlebody</FONT>
<FONT COLOR="#ff0000">-Some JDM intakes (will hit against the battery becasue of the drive by wire system made the TB sit further out)</FONT>
<FONT COLOR="red">-Spoon blue wide mirrors</FONT>
<FONT COLOR="red">-J's Racing Cross bar</FONT>
<FONT COLOR="red">-J's Racing floor bar</FONT>
<FONT COLOR="red">-Spoon header</FONT>
<FONT COLOR="red">-All JDM header</FONT>
<FONT COLOR="red">-earlier model GD1/GD2 exhaust b-pipe will not fit</FONT>

<FONT COLOR="seagreen">Parts that I haven't test:</FONT>

<FONT COLOR="seagreen">-J's/samco or Spoon radiator hoses</FONT>
<FONT COLOR="seagreen">-Spoon air cleaner</FONT>
<FONT COLOR="#2e8b57">-Stereo dash kit (coming)</FONT>
<FONT COLOR="#2e8b57">-TK Sports subframe bar (front & rear)</FONT>
<FONT COLOR="#2e8b57">-J's Racing brakelines</FONT>
<FONT COLOR="#2e8b57">-J's Racing 3D GT-wing</FONT>
<FONT COLOR="#2e8b57">-T1R test pipe with O2 simulator</FONT>
<FONT COLOR="#2e8b57">-JDM roof console</FONT>
<FONT COLOR="green">-ALEX Engine mounts</FONT>

<FONT COLOR="purple">UNknown - if it is going to work or not !</FONT>
<FONT COLOR="purple">-Top fuel Turbo</FONT>
<FONT COLOR="purple">-HKS Turbo kit</FONT>
<FONT COLOR="purple">-Final gear set</FONT>
<FONT COLOR="purple">-LSD</FONT>
<FONT COLOR="purple">-clutch</FONT>

Thanks
Ben

AJ PwR

I also have a pic of the fender bars installed

crvpimpin

those look sweet
have you tested them out yet

carboy0402

aj pwr: can you post pics of what you have installed. I really want to see. I learn alot from your pics. ehhehehehe

Oh and by the way can I buy parts from you and ship here to Sydney, Australia???

C Neighoff

love the updates.. its good to see someone is finding out what works and doesnt

should make one whole thread on what will and wont work and what you gotta do to get it to work and have it stickied for future reference

Jet Phi

i sure would love to see some pics

jarel

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by C Neighoff &raquo;</TD></TR><TR><TD CLASS="quote">love the updates.. its good to see someone is finding out what works and doesnt

should make one whole thread on what will and wont work and what you gotta do to get it to work and have it stickied for future reference</TD></TR></TABLE>


definately a good shop for saying what fits and what doesn't cutting the BS and getting to the point. wish people would do that for other cars.

0MrHeeltoe

Wow, so you could not get the JDM front end on the car?

eeeKs

he's still in the process of doing it..
im sure hes almost done

0MrHeeltoe

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by eeeKs &raquo;</TD></TR><TR><TD CLASS="quote">he's still in the process of doing it..
im sure hes almost done</TD></TR></TABLE>


Ah...got confused when he said they did not fit. Must have meant that they don't bolt on.

efficiencyJunkie

Those fender bars look like they will prevent the car from properly absorbing the impact from a accident,

right?

Chris22215

looks like your off to a good start

Dougie Pants

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by AJ PwR &raquo;</TD></TR><TR><TD CLASS="quote">I also have a pic of the fender bars installed


</TD></TR></TABLE>


These must be in my next bulk order

Dougie Pants

Are these what you are referring to as TK Sport Subframe Bars???

Dougie Pants

Ben did you get a chance to get the Alex Under Tray test fitted with USDM model?

C Neighoff

off topic, but are you guys planning on tracking this fit, or is it just a RandD car??

Dougie Pants

I'm tracking it

revolt_allmotor

what mods are needed to make the JDM front susp work?

oh and can any of you JDM guys find out if Ohlins makes a kit for the Fit?

for good info

AJ PwR

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Dougie Pants &raquo;</TD></TR><TR><TD CLASS="quote">Are these what you are referring to as TK Sport Subframe Bars???


</TD></TR></TABLE>

Yes.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Dougie Pants &raquo;</TD></TR><TR><TD CLASS="quote">Ben did you get a chance to get the Alex Under Tray test fitted with USDM model?
</TD></TR></TABLE>

I will have it tested next week.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote &raquo;</TD></TR><TR><TD CLASS="quote"> off topic, but are you guys planning on tracking this fit, or is it just a RandD car??
</TD></TR></TABLE>

Yes I will. I am trying to make myseld a rear camber kit and the car will be hitting the track on July 3rd at Pacific Raceways WA.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote &raquo;</TD></TR><TR><TD CLASS="quote">what mods are needed to make the JDM front susp work?
oh and can any of you JDM guys find out if Ohlins makes a kit for the Fit?

for good info

</TD></TR></TABLE>

You will need to enlarge the bottom of the front shocks in order to have them fitted on.

Dougie Pants

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by AJ PwR &raquo;</TD></TR><TR><TD CLASS="quote">Yes.

I will have it tested next week.

Yes I will. I am trying to make myseld a rear camber kit and the car will be hitting the track on July 3rd at Pacific Raceways WA.

You will need to enlarge the bottom of the front shocks in order to have them fitted on.</TD></TR></TABLE>

You have an email....

civicEXtreme

whats the point of the fender bars, seems pointless to me.

AJ PwR

This bar actually make a pretty decent difference on the Fit. You can see it attached from the door to the frame part above the wheel. At that area it is conjunted by few welds and the bar is to reinforce it to reduce chassis flex.

From my expierence, the fender bar makes way more difference than any braces underneath the car except swaybar.

Dougie Pants

cant wait...