Parts fitment report !
#1
Honda-Tech Member
Thread Starter
Join Date: Dec 2000
Location: JDM Land, Canada
Posts: 2,129
Likes: 0
Received 0 Likes
on
0 Posts
Parts fitment report !
Hi Guys,
Here's somes pics of my car with mods so far
Sorry for not posting result sooner and I have some good and bad news for you guys.
<FONT COLOR="blue">For the parts that fit so far :</FONT>
<FONT COLOR="blue">-J's Racing strut bar (front) 6 holes on the car only 4 line up (it will work)</FONT>
<FONT COLOR="blue">-J's Racing rear strut bar</FONT>
<FONT COLOR="blue">-J's Racing c-pillar bar</FONT>
<FONT COLOR="blue">-J's and Cusco Lower tie bar</FONT>
<FONT COLOR="blue">-T1R Coil springs</FONT>
<FONT COLOR="blue">-Spoon header / b-pipe and N1 Muffler (little bit short because USDM bumper is longer by 1.5-2")</FONT>
<FONT COLOR="blue">-T1R muffler</FONT>
<FONT COLOR="blue">-JDM tail lights (wiring must be extended and some plugs has to be modified)</FONT>
<FONT COLOR="blue">-JDM rear bumper (with replacing re-bar to monocoque bar)</FONT>
<FONT COLOR="blue">-Spoon carbon spoiler **when the hatch all the way up, it will hit the Antenna** **rear wipers will hit the spoiler when you turn them on**</FONT>
<FONT COLOR="blue">-Titanium Antenna</FONT>
<FONT COLOR="blue">-JDM and Mugen door visors</FONT>
<FONT COLOR="blue">-Mugen shiftboot and e-brake cover</FONT>
<FONT COLOR="blue">-JDM mirrors</FONT>
<FONT COLOR="blue">-Spoon blue wide mirror lens (convex)</FONT>
<FONT COLOR="blue">-Mugen door sills</FONT>
<FONT COLOR="blue">-JDM front rebar</FONT>
<FONT COLOR="blue">-Spoon thermoswitch</FONT>
<FONT COLOR="blue">-Spoon drain plugs</FONT>
<FONT COLOR="blue">-J's/Spoon oil cap and rad cap</FONT>
<FONT COLOR="blue">-J's/Spoon brakelines</FONT>
<FONT COLOR="blue">-J's monocoque bar</FONT>
<FONT COLOR="#0000ff">J's 50RR/RS exhaust</FONT>
<FONT COLOR="red">Parts that don't fit:</FONT>
<FONT COLOR="red">-all JDM brand front coil-over suspension will not fit without major modifications</FONT>
<FONT COLOR="red">-JDM front bumper</FONT>
<FONT COLOR="red">-JDM HID headlamps</FONT>
<FONT COLOR="red">-ALL JDM hood</FONT>
<FONT COLOR="red">-ALL JDM grills</FONT>
<FONT COLOR="red">-ALL JDM front or rear bumper or lip / apron (ONLY side skirts will fit)</FONT>
<FONT COLOR="red">-Mugen hatch filler (cannot fit without JDM bumper)</FONT>
<FONT COLOR="red">-J's/Spoon Engine Torque Damper</FONT>
<FONT COLOR="red">-J's/Spoon throttlebody</FONT>
<FONT COLOR="#ff0000">-ALL JDM tow hooks (except you did a JDM conversion)</FONT>
<FONT COLOR="#ff0000">-JDM intakes (will hit against the battery becasue of the drive by wire system made the TB sit further out)</FONT>
<FONT COLOR="seagreen">Parts that I haven't test:</FONT>
<FONT COLOR="seagreen">-J's Racing rear cross bar</FONT>
<FONT COLOR="seagreen">-J's Racing room bar</FONT>
<FONT COLOR="seagreen">-J's/samco or Spoon radiator hoses</FONT>
<FONT COLOR="seagreen">-Spoon air cleaner</FONT>
<FONT COLOR="purple">UNknown - if it is going to work or not !</FONT>
<FONT COLOR="purple">-Top fuel Turbo</FONT>
<FONT COLOR="purple">-HKS Turbo kit</FONT>
<FONT COLOR="purple">-Final gear set</FONT>
<FONT COLOR="purple">-LSD</FONT>
<FONT COLOR="purple">-clutch</FONT>
I will keep you guys updated if I find out more information.
Thanks
Ben
Here's somes pics of my car with mods so far
Sorry for not posting result sooner and I have some good and bad news for you guys.
<FONT COLOR="blue">For the parts that fit so far :</FONT>
<FONT COLOR="blue">-J's Racing strut bar (front) 6 holes on the car only 4 line up (it will work)</FONT>
<FONT COLOR="blue">-J's Racing rear strut bar</FONT>
<FONT COLOR="blue">-J's Racing c-pillar bar</FONT>
<FONT COLOR="blue">-J's and Cusco Lower tie bar</FONT>
<FONT COLOR="blue">-T1R Coil springs</FONT>
<FONT COLOR="blue">-Spoon header / b-pipe and N1 Muffler (little bit short because USDM bumper is longer by 1.5-2")</FONT>
<FONT COLOR="blue">-T1R muffler</FONT>
<FONT COLOR="blue">-JDM tail lights (wiring must be extended and some plugs has to be modified)</FONT>
<FONT COLOR="blue">-JDM rear bumper (with replacing re-bar to monocoque bar)</FONT>
<FONT COLOR="blue">-Spoon carbon spoiler **when the hatch all the way up, it will hit the Antenna** **rear wipers will hit the spoiler when you turn them on**</FONT>
<FONT COLOR="blue">-Titanium Antenna</FONT>
<FONT COLOR="blue">-JDM and Mugen door visors</FONT>
<FONT COLOR="blue">-Mugen shiftboot and e-brake cover</FONT>
<FONT COLOR="blue">-JDM mirrors</FONT>
<FONT COLOR="blue">-Spoon blue wide mirror lens (convex)</FONT>
<FONT COLOR="blue">-Mugen door sills</FONT>
<FONT COLOR="blue">-JDM front rebar</FONT>
<FONT COLOR="blue">-Spoon thermoswitch</FONT>
<FONT COLOR="blue">-Spoon drain plugs</FONT>
<FONT COLOR="blue">-J's/Spoon oil cap and rad cap</FONT>
<FONT COLOR="blue">-J's/Spoon brakelines</FONT>
<FONT COLOR="blue">-J's monocoque bar</FONT>
<FONT COLOR="#0000ff">J's 50RR/RS exhaust</FONT>
<FONT COLOR="red">Parts that don't fit:</FONT>
<FONT COLOR="red">-all JDM brand front coil-over suspension will not fit without major modifications</FONT>
<FONT COLOR="red">-JDM front bumper</FONT>
<FONT COLOR="red">-JDM HID headlamps</FONT>
<FONT COLOR="red">-ALL JDM hood</FONT>
<FONT COLOR="red">-ALL JDM grills</FONT>
<FONT COLOR="red">-ALL JDM front or rear bumper or lip / apron (ONLY side skirts will fit)</FONT>
<FONT COLOR="red">-Mugen hatch filler (cannot fit without JDM bumper)</FONT>
<FONT COLOR="red">-J's/Spoon Engine Torque Damper</FONT>
<FONT COLOR="red">-J's/Spoon throttlebody</FONT>
<FONT COLOR="#ff0000">-ALL JDM tow hooks (except you did a JDM conversion)</FONT>
<FONT COLOR="#ff0000">-JDM intakes (will hit against the battery becasue of the drive by wire system made the TB sit further out)</FONT>
<FONT COLOR="seagreen">Parts that I haven't test:</FONT>
<FONT COLOR="seagreen">-J's Racing rear cross bar</FONT>
<FONT COLOR="seagreen">-J's Racing room bar</FONT>
<FONT COLOR="seagreen">-J's/samco or Spoon radiator hoses</FONT>
<FONT COLOR="seagreen">-Spoon air cleaner</FONT>
<FONT COLOR="purple">UNknown - if it is going to work or not !</FONT>
<FONT COLOR="purple">-Top fuel Turbo</FONT>
<FONT COLOR="purple">-HKS Turbo kit</FONT>
<FONT COLOR="purple">-Final gear set</FONT>
<FONT COLOR="purple">-LSD</FONT>
<FONT COLOR="purple">-clutch</FONT>
I will keep you guys updated if I find out more information.
Thanks
Ben
#2
Junior Member
Join Date: Sep 2004
Location: Las Vegas, NV, USA
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
damn ben. you've been busy. thanks for posting pics (took you long enough). that's alot of very helpful info. the car looks good though. nice start for you.
#4
Join Date: Oct 2003
Location: Bloomington, Illinois, USA
Posts: 1,519
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Takashi1978)
Parts that I haven't test:
-J's Racing rear cross bar
-J's Racing room bar
Get these Tested Yo!!!!! LOL
What is the difference between the J's 50 RR & RS?
-J's Racing rear cross bar
-J's Racing room bar
Get these Tested Yo!!!!! LOL
What is the difference between the J's 50 RR & RS?
#6
Re: Parts fitment report ! (AJ PwR)
Awesome! Thanks for all the info. I was thinking of getting some parts but now that in know this I have to find other alternatives. I was hoping that the coilovers would fit. Damn. Are those the Rays 16x7 with the +35 offset? They look sweet! What bolt pattern is it? 4x100 or 4x114? What's the drop? It's not to low and not too high. looks really good. Can you post pics of the suspesion, interior, and engine bay. im rel curious to see the whole process.
Modified by helmetDA at 2:53 PM 4/6/2006
Modified by helmetDA at 2:53 PM 4/6/2006
#7
Junior Member
Join Date: Mar 2006
Location: Gloucester, Virginia
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
Dope pictures, Im not a fan of the exhaust though, looks out of place, but to each his own. I want to know pricing for the Spoon wing and how hard it was to install, and pictures of the T1R springs installed!!!!!
Trending Topics
#10
Honda-Tech Member
Re: Parts fitment report ! (carbnjunkie)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by carbnjunkie »</TD></TR><TR><TD CLASS="quote">What is it lowered on?
looks fly!</TD></TR></TABLE>
Read the first post.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by aallbbeerrtttttt »</TD></TR><TR><TD CLASS="quote">just wondering, how come the JDM hood, grills, bumpers, headlights, etc. wont fit? i thought the only physical difference in the front end was the bumper</TD></TR></TABLE>
Just a speculation that when they had to change the front bumper to adhere to collision safety standards, the entire nose was affected. We'll let Ben get to the specifics....maybe a side by side photo comparo to show the actual differences in dimensions/mounts etc.
looks fly!</TD></TR></TABLE>
Read the first post.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by aallbbeerrtttttt »</TD></TR><TR><TD CLASS="quote">just wondering, how come the JDM hood, grills, bumpers, headlights, etc. wont fit? i thought the only physical difference in the front end was the bumper</TD></TR></TABLE>
Just a speculation that when they had to change the front bumper to adhere to collision safety standards, the entire nose was affected. We'll let Ben get to the specifics....maybe a side by side photo comparo to show the actual differences in dimensions/mounts etc.
#11
H-T Order of Merit
Re: Parts fitment report ! (AJ PwR)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by AJ PwR »</TD></TR><TR><TD CLASS="quote">I will keep you guys updated if I find out more information.
</TD></TR></TABLE>
Thank you very much for keeping people updated and sharing the information.
</TD></TR></TABLE>
Thank you very much for keeping people updated and sharing the information.
#13
Honda-Tech Member
Thread Starter
Join Date: Dec 2000
Location: JDM Land, Canada
Posts: 2,129
Likes: 0
Received 0 Likes
on
0 Posts
Re: Parts fitment report ! (carbnjunkie)
I am running on the T1R B-Max coil-overs, ride quality is good but i think it is still a little to stiff for a daily driver.
I was running on the T1R springs for a day, just to test them out and the ride is excellent. Since the Fit is such a good platform, with the car lowered make it even better
I was running on the T1R springs for a day, just to test them out and the ride is excellent. Since the Fit is such a good platform, with the car lowered make it even better
#15
Honda-Tech Member
Thread Starter
Join Date: Dec 2000
Location: JDM Land, Canada
Posts: 2,129
Likes: 0
Received 0 Likes
on
0 Posts
I have find out one more thing today:
All JDM throttle bodies will not fit to USDM Fit because USDM is drive by wire so it will not work.
All JDM throttle bodies will not fit to USDM Fit because USDM is drive by wire so it will not work.
#18
AJ POWER you said "-all JDM brand front coil-over suspension will not fit without major modifications"
My TEIN SUPER WAGONS fitted no problems. It should fit..... What do you have to modify for it to make the japanese branded coilovers fit the US Jazz?
My TEIN SUPER WAGONS fitted no problems. It should fit..... What do you have to modify for it to make the japanese branded coilovers fit the US Jazz?
#20
Junior Member
Join Date: Oct 2004
Location: Richmond, BC, Canada
Posts: 161
Likes: 0
Received 0 Likes
on
0 Posts
Re: (carboy0402)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by carboy0402 »</TD></TR><TR><TD CLASS="quote">AJ POWER you said "-all JDM brand front coil-over suspension will not fit without major modifications"
My TEIN SUPER WAGONS fitted no problems. It should fit..... What do you have to modify for it to make the japanese branded coilovers fit the US Jazz?</TD></TR></TABLE>
We are in North America and u are in Sydney....Does this ring a bell to u?
My TEIN SUPER WAGONS fitted no problems. It should fit..... What do you have to modify for it to make the japanese branded coilovers fit the US Jazz?</TD></TR></TABLE>
We are in North America and u are in Sydney....Does this ring a bell to u?
#21
Join Date: Oct 2003
Location: Bloomington, Illinois, USA
Posts: 1,519
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Lude S)
The USDM Models use a 19mm bolt in the front suspension which is like the GD1/2 1.3L I believe. The JDM GD3 uses a 17mm bolt for the front suspension and that is not the same suspension on the USDM GD3's
#22
Honda-Tech Member
Join Date: Jul 2003
Location: Ottawa, Canada
Posts: 1,115
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Dougie Pants)
What is different about the JDM mirrors? Other than being designed for right hand drive of course.
I am trying to find heated mirrors for my Canadian car, damn Honda gave the rest of the world heated mirrors except us North Americans dammit.
Anybody know of any left hand drive Fit's/Jazz with heated mirrors? Or a part number at least?
I am trying to find heated mirrors for my Canadian car, damn Honda gave the rest of the world heated mirrors except us North Americans dammit.
Anybody know of any left hand drive Fit's/Jazz with heated mirrors? Or a part number at least?
#23
Re: (MightyMouseTech)
IC IC... why did HONDA USA do that? so meaning the Honda Jazz in the USA is not standard to the other Jazz's around the world.... that's no good