1st gen cr-v strut spacers
#6
Honda-Tech Member
Join Date: Jan 2006
Location: Rock Hill, SC, USA
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1st gen cr-v strut spacers
Guys...and for future reference, I did not make these myself. I designed them and had a shop mill them out of aluminum. If anyone wanted a set I have one 0.5" set. It'll raise the rear about 5/8" - 3/4" and the front probably 3/4" - 1". You will need extended tophat studs.
Please PM if you want to buy the set I have but know I'm not making them, lol! Thx!
I had mine made by custombilletworks.com. He could make any thickness you want. Remember that you will raise the CRV more than the thickness of the spacers, not exactly sure what the ratio is but about .85:1 rear and .75:1 front. Meaning a .75" spacer will raise the front 1" etc....
Here's my template, feel free to download it and give to a shop or use for yourself. Only change to template is drill the holes 11mm or even 12mm. 10mm was REALLY snug.
Please PM if you want to buy the set I have but know I'm not making them, lol! Thx!
I had mine made by custombilletworks.com. He could make any thickness you want. Remember that you will raise the CRV more than the thickness of the spacers, not exactly sure what the ratio is but about .85:1 rear and .75:1 front. Meaning a .75" spacer will raise the front 1" etc....
Here's my template, feel free to download it and give to a shop or use for yourself. Only change to template is drill the holes 11mm or even 12mm. 10mm was REALLY snug.
Last edited by 19dabeast85; 04-17-2014 at 06:45 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Gennady
Honda Accord (1990 - 2002)
8
04-21-2002 11:35 AM