ZC swap intake question
#3
Honda-Tech Member
Re: (crxrocks)
^^ correct.
You can also send your mani and TB to Maxbore to get bored out...but a different D series SOHC mani will not work on the DOHC ZC
You can also send your mani and TB to Maxbore to get bored out...but a different D series SOHC mani will not work on the DOHC ZC
#4
Re: ZC swap intake question (BuddhistPriest87)
Yes, but......
You guys are not telling him that as far as parts go, the d16a6 is identical to the SOHC ZC, all parts are interchangeable.............The DOHC ZC is in a ball park all by itself.
You guys are not telling him that as far as parts go, the d16a6 is identical to the SOHC ZC, all parts are interchangeable.............The DOHC ZC is in a ball park all by itself.
#7
Honda-Tech Member
Re: ZC swap intake question (BuddhistPriest87)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BuddhistPriest87 »</TD></TR><TR><TD CLASS="quote">yeah i didn't get the DOHC ZC, i've got the SOHC...so that means the exhasut will work then?</TD></TR></TABLE>
The exhaust side works regardless of it being a DOHC or SOHC ZC.
The exhaust side works regardless of it being a DOHC or SOHC ZC.
Trending Topics
#9
Re: ZC swap intake question (BuddhistPriest87)
yea it will work, the sohc zc is essentially exactly the same motor as a d16a6, just a little more aggressive cam...but any d16 or d15 sohc intake manifold will swap over...so if you have a few extra bucks layin around i would go with the z6 or y8 manifold, personally i prefer the z6, has longer runners and is a little torqueier (if thats a word)
Thread
Thread Starter
Forum
Replies
Last Post
Mr.Death
Honda CRX / EF Civic (1988 - 1991)
2
06-22-2006 12:18 PM
VelocityR
Honda CRX / EF Civic (1988 - 1991)
5
11-14-2003 07:22 AM